Fiat has been one of the staple sub-compact car companies in Europe for decades and for the 2012 model year, Fiat has made a bold return to the US market with the Fiat 500 with 1.4 liter engine. This time Chrysler is backing their efforts. This iconic sub-compact offers classy Italian styling and excellent fuel efficiency, while still having a fairly peppy engine.

2012 Fiat 500 (with 1.4L engine) owners looking for better performance have received an answer to their wishes with K&N‘s 33-2471 air filter. The 33-2471 is washable and reusable and it is designed to increase horsepower. The filter utilizes K&N’s pleated oiled cotton gauze filter media for excellent airflow, filtration efficiency and high dirt capacity. This filter is very easy to clean using a K&N 99-5000 or 99-5050 Recharger Kit but you won’t need to worry about cleaning until up to 50,000 miles of use depending on driving conditions. Like all K&N replacement air filters the 33-2471 is backed by K&N’s industry leading Million Mile Limited Warranty.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click K&N for more products.

Competition Clutch has released a revised twin disc for the Mitsubishi Evo. This kit has permanently replaced the older/lighter variant Twin Disc that was being sold.

This revised assembly had weight added to achieve the proper moment of inertia; which resulted in better street manners while still allowing 10K RPM shifts with ease.

The most drivable 7.25” Twin Disc available on the market!

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Competition Clutch for more products.

NOW AVAILABLE – Whiteline sway bars for the 2012 FORD FOCUS Consisting of a front fixed 24mm solid sway bar (BMF51X) with 2 size options of 22mm (street) and 24mm (track) in the rear which both feature 2 point adjustment for fine tuning handling behaviour.

A sway bars objective is to reduce sway, or body roll, and stabilise a vehicle under lateral (cornering) forces. Having adjustability permits the roll stiffness to be tuned for different situations without replacing the entire bar. The stiffer the bar, the more force required to move the left and right wheels relative to each other. This increases the amount of force required to make the body roll.

Cornering loads are spread more evenly across the tyres delivering more grip and frankly, that’s what it’s all about. You also get improved tire wear as your tires stay flatter and upright. Comfort improves because your car sits flatter through bends meaning less movement inside the vehicle.

Whiteline sway bars are part of the Whiteline handling system. Designed to match and integrate with Chassis Bracing and key alignment products to deliver a fully balanced handling solution.

Synthetic Elastomer bushing mounts are also included with alloy lateral locks finishing off the kit to prevent walking of the sway bar.

So without reducing comfort, a Whiteline sway bar will make your suspension system and tires perform better, making the car more responsive while delivering more grip.

2012 FORD FOCUS TITANIUM

• BMF51X – Front 24mm non adjustable sway bar
• BMR78Z – Rear 22mm 2 point adjustable sway bar
• BMR78XZ – Rear 24mm 2 point adjustable sway bar

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Whiteline for more products.

Blackworks Downpipes are Made from high quality Stainless steel, and Precision TIG Welded for quality. Our Downpipes are made from 3″ OD mandrel bent tubing to support your high horse power level with a re-enforced high quality Flex Section. Hand Made In The USA!!

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click BWR for more products.

A current Ford advertisement for the 2012 Ford Mustang GT reads “All Legend. Zero Compromise.” Regardless of personal preference, reality shows, hip-hop, suburbia, Mount Rushmore, and the Ford Mustang are all a part of American culture. They all influence our culture and color the way we are perceived by the rest of the world.

The Ford Mustang has gone through many changes in its life since 1964 and the new era of Mustangs and pony cars pay a very respectable homage to their legendary elders of yesteryear. And whether it’s the 31mpg, 305 horsepower 3.7L V6, or the 26 mpg, 412 horsepower 5.0L V8, be assured that current and prospective owners will find a lifetime of performance by replacing the existing factory installed air filter with AEM‘s 28-20431 Dryflow OE replacement air filter. See list below for Mustang model details. The Dryflow filter is a direct replacement for the stock air filter and requires no modification to the vehicle.

With AEM Dryflow air filters, you get an ultimate combination of airflow, filtration efficiency, dirt capacity, and ease of cleaning. AEM Dryflow filters use an innovative non-woven dry synthetic filter media that takes the guesswork out of servicing, and allows for easy cleaning, using a mild, synthetic air filter cleaner, along with easy to follow cleaning instructions. The 28-20431 is a true performance air filter designed to improve your Mustang’s horsepower without the hassle of re-oiling the filter after cleaning. All AEM replacement air filters for street vehicles are backed by AEM’s Lifetime Limited Warranty.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click AEM for more products.

The VACANZA ZERO Wagon series suspension enables a lowered vehicle height while enhancing comfort and ride feel. This component is a must for vehicles fitted with larger wheel sizes.

The chassis components stiffen up the entire vehicle, maintaining proper suspension geometry and alignment especially effective during flex stress loads on the chassis frame.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click CUSCO for more products.

The K-Tuned Ram Header at first glance looks like a pretty crazy design. Essentially it is a long tube header that has been pushed up into the engine bay to provide much better ground clearance. However, there is another purpose to all the turns that you are seeing. They keep the exhaust gases hot and when the exhaust is hot it moves out more quickly. So I bet your next question is, “Does it make power ?” The answer is yes. This header is definitely the top dog of K-Tuned swap headers. It beat both our K-Tuned 4-2-1 Swap header and even our 4-1Race header during dyno testing. Also when tested side by side against a header with a comparable tube length we came out ahead again.

The K-Tuned Ram Header features full 304 stainless steel construction with equal length tubing and a proven stepped design. It starts with 44mm primaries to 47mm to 50mm and finishes with a 65mm or 2.5” exit. It also uses three true merge collectors at all transitions to maximize the exhaust flow. This header has been specifically designed for both high end and midrange horsepower gains. Now for the best part, not only does this header offer excellent ground clearance and shifter box clearance it also fits both K20 and K24 engines in the DA, EG, EK and DC2 chassis. Sorry guys it does not fit the EF chassis.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click  K-Tuned for more products.

The Mishimoto BMW E46 (M3) Silicone Intake Boot is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Mishimoto for more products.

Run out of Fuel on your Evo X and need more fuel pump?? Here is the answer to your fuel issues.

We have designed a 6061 Billet Fuel Pump Holder to accept Walbro 255lph pumps along with Aeromotive, Deatschwerks, and FullBlown 340lph Pumps.

The 340LPH fuel pumps will give you enough fuel to make over 500whp on your Evo X w/ E85. Plenty for stock motor applications. These are all E85 Compatible.

Kit Includes:

• Pump Holder
• Flexible Hose
• Filter
• Set Screws to hold pump in place

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Torque Solution for more products.

Eibach PRO-KIT is the perfect answer for most frequently-driven street cars. It’s our legendary spring system that dramatically improves both a vehicle’s performance and appearance.

PRO-KIT lowers your Cruze’s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach PRO-KIT is the finishing touch to a winning recipe for performance. PRO-KIT also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Pro-Kit:

• High Performance Handling and Aggressive Good Looks
• Lower Center of Gravity — Lowers Cruze 0.8″ Front and 1.2″ Rear
• Stop Quicker, Corner Faster and get Better MPG
• Excellent Ride Quality
• Million Mile Warranty

Every Eibach PRO-KIT is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, PRO-KIT provides the ultimate balance to take your passion for driving to a whole new level.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Eibach for more products.