The full size pickup market is a never ending battle when it comes to styling, powerful engines, and fuel economy. These characteristics determine which manufacture has the toughest, user friendly pickup. 2010 and 2011 Toyota Tundra models offer an ample amount of room concealed inside an aggressively styled exterior. Four engine options are available based on the designated packages offered. The latest engine to join the lineup is the 4.6 liter i-Force V8. It packs a punch with an estimated 310 horsepower; not to mention, it offers a not-too-shabby 15/20 estimated miles per gallon city/highway. Any truck lover can appreciate what Toyota has done here.

For those that want the most out of their 2010 or 2011 Tundra with a 4.6 liter engine, K&N offers an air intake system that will allow for increased horsepower and acceleration. The system is an AirCharger air intake system with part number 63-9035. The intake reduces restriction in the intake path by removing the restrictive factory air box, air filter and intake tubing and replaces them with K&N’s smooth bore intake tube and a legendary K&N high flow air filter.

K&N dyno tests each and every intake system. The 63-9035 provided an estimated horsepower increase of 13 horsepower at 5517RPM, and an additional estimated 10.61 pound feet of torque to the wheels.

The K&N air filter provided in the kit is washable and reusable, and oversized for high flow rates and less restriction. It is made of a specially woven cotton media surrounded by a rigid wire mesh for structural integrity and durability. All of the components included in 63-9035 are so tough that K&N deems this intake worthy of their industry-leading Million Mile Limited Warranty. It will provide 2010 and 2011 Toyota Tundra 4.6L owners power and performance for a lifetime.

Usually installs in 90 minutes or less using K&N’s simple installation instructions and its air filter can be used for up to 100,000 miles before servicing is needed, depending on driving conditions.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click K&N for more products.

Whiteline‘s Anti Geometry Kit for 2011 Subaru WRX STI (excludes WRX) replaces the front control arm rear vertically mounted bushing and feature light weight aluminium housing with high performance/ low compliance bearings for optimum dynamic alignment under the high rigours of motorsport applications. Positive static caster gains can also be achieved by the offset orientation of the bearing and all motorsport kits come in ‘STEALTH BLACK’.

Unique to any Whiteline Anti Geometry kit before it, KCA425M allows STI you to tune geometry from Anti Lift to Anti Dive via a combination of recommended spacers delivering a window of handling behaviour to suit varying track, vehicle set up and driver needs. Use KCA334M for 2011 WRX and non turbo models.

With a Whiteline Anti Geometry kit fitted to your 2011 STI, more compliant suspension will be induced during braking and accelerating. This will benefit traction, as the wheel will be able to track the tarmac more precisely. In terms of balance, the front end will have a proportionally lower roll resistence during traction or braking. Aids in reducing the power understeer effect that is present in these vehicles and resulting in a better handling vehicle. Anti dive helps manage weight transfer under braking, resulting in a more balanced chassis at high speed/ lateral loads. With added caster gains resulting in a sharper, more precise steering feel.

“Anti” features in suspension systems are a characteristic that can be used to influence the stiffness of the front or rear suspension under traction forces(under braking or accelerating). The individual terms are relatively straightforward and self-explanatory with the “anti” reducing or totally restricting the characteristic (lifting or diving). In the front suspension there may be levels of anti-dive during braking and anti-lift during accelerating (assuming traction to the front wheels is present).

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Whiteline for more products.

Skunk2 is proud to introduce its 74mm Pro Series Throttle Body for Honda’s B-series engines (also compatible with F- and H-series) in its exclusive, Black Series finish. Skunk2’s 74mm Pro Series Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow.

Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesn’t just provide more flow but retains smooth drivability and OEM throttle characteristics. Each Pro Series Throttle Body is designed using the latest CAE (Computer Aided Engineering) tools, which results in a unit that exceeds industry standards. Pro Series Throttle Bodies are also CNC machined from forged, billet 6061-T6 aluminum and hard anodized for durability in Skunk2’s signature Black Series finish. Additionally, Skunk2’s unique design relocates the MAP sensor underneath and eliminates the OEM water passages for cooler operation and a cleaner appearance. Pro Series Throttle Bodies are also compatible with OEM throttle cables, which simplifies installation. Each Skunk2 Pro Series Throttle body also features sealed bearings for smooth operation and a genuine, integrated Skunk2 badge. All necessary hardware and a new throttle body gasket are included for trouble-free installation.

A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2’s Pro Series Throttle Bodies for B-series engines feature a large, 74mm bore, which results in significant horsepower gains throughout the powerband on heavily modified, naturally aspirated applications and even more on forced induction ones.

FEATURES:

• Large 74mm Bore
• Black Series Finish
• Compatible With OEM Throttle Cable
• CNC-Forged 6061-T6 Billet Aluminum Construction
• Sealed Bearings For Smooth Operation
• Eliminated Water Passages For Cooler Operation
• Integrated Skunk2 Badge

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Skunk2 for more products.

Competition Clutch now offers a 250mm clutch and flywheel upgrade kit for the Subaru WRX/STI. This assembly provides a smooth engagement, light pedal and near stock drivability. The complete clutch and flywheel kit weighs in at 31 lbs. compared to the 38 lb. OE assembly.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Competition Clutch for more products.

Since Hyundai first introduced the Excel to the U.S. auto market in 1986 they have continued to take baby steps, very intelligently feeling things out along the way, never leaping without first knowing where to land. The 1986 Excel was nominated number 10 on Fortune Magazine’s “Best Product” list, in large part because of its price. The Excel produced sticker shock in a reverse direction, leaving some to ponder how Hyundai could offer so much for so little.

Hyundai is based in Seoul, South Korea, and along with Kia, now comprises the Hyundai Kia Automotive Group. Now those baby steps have grown into the world’s fourth largest automaker as of 2009. Now in 2011 it has been the world’s fastest growing automaker for two years running. The intelligent baby steps have paid off, and one such stride was the Genesis Coupe, offering enthusiasts a rear-wheel-drive coupe powered by a turbocharged 2.0L four-cylinder or naturally aspirated 3.8L V6 engine. The Genesis’ performance, coupled with its stylish looks, have opened many enthusiasts’ eyes to Hyundai as a high-performance company.

Owners of 2008 through 2012 Hyundai Genesis Coupes with 2.0L turbo or 3.8L V6, can save money and help their cars breathe easier by simply replacing the existing factory installed air filter with the high performance 28-20958 AEM Dryflow replacement air filter. The Dryflow air filter is a direct replacement for the stock air filter.

AEM’s 28-20958 air filter is washable and reusable and it does not require oil. It can be used for up to 50,000 miles before cleaning is needed depending on driving conditions. The 28-20958 air filter perfectly complements the intelligent design of the Hyundai’s Genesis, and it is a true performance air filter designed to improve horsepower without the inconvenience of oil. AEM OE replacement air filters are backed by AEM’s Lifetime Limited Warranty so the days of buying paper filters over and over are … over.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click AEM for more products.

Little girl’s have always had the dream request of: ‘I want a pony!’.  Well now, their brothers (and dads) have their own plea: ‘I want a Mario Kart!’.

Behold the most amazing team up of fantasy and reality – virtual and actual – video games and cars!

The life size Mario Kart was brought from the screen to the real world with a collaboration between Nintendo and West Coast Customs.  Currently, the Mario ‘Standard Kart’ and Luigi’s ‘Bumble V Kart’ are on display and build ups are slated for a few episodes of the shop’s reality show.

As for when you can get your hands on one?  No info on purchasing yet.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click RPM Superstore for more products.

The K-Tuned V2 Billet TPS Sensor features a revised design that is a direct plug in to the factory engine harness. We also added some slotted holes to allow a much simpler manual adjustment. No more rewiring or computer calibration is needed because the slotted holes allow the sensor to be scaled properly on all cars, even cars using unmodified factory ecus. The TPS unit is constructed with an oem quality sensor that is encapsulated in a billet aluminum housing. The housing is designed with a special silicone filled pocket to absorb the engine vibrations that typically ruin other sensors.

We’ve seen and read about the cheap TPS units causing countless drivability problems and failures and in some cases even oem sensors have failed prematurely. These problems and failures are exactly what motivated us to design a truly reliable aftermarket TPS replacement. As with all K-Tuned products, successful real world testing was completed on several cars to ensure that our TPS unit could withstand the vibration associated with semi-solid K-series swap mounts. We are so confident in our design that K-Tuned is even offering a 1 year no hassle repair warranty.

The TPS can be installed on any K20A/A2 and Z1 throttlebody or the A3 throttlebody from the Honda EP3 hatchback. It also fits several aftermarket TB’s. Our TPS sensor comes complete with a new gasket and all mounting hardware. If you are having any TPS related problems, this part is exactly what you need.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click K-Tuned for more products.

The Mishimoto Volkswagen Golf VR6 Silicone Hose Kit is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

Mishimoto guarantees superior performance and quality with an unmatched lifetime warranty on all parts.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Mishimoto for more products.

Looking for something a little more stylish this year for the gear head in your life?  Then it’s time to turn to Lowly Gentlemen, you know, the purveyors of fine goods.

‘The Shed’ Wallet and Chain is a combination of Italian cow hide  lined with Italian pig suede, accompanied by cream deviated stitching; if that doesn’t sound stylish, then this gear head doesn’t know what stylish is.  So where does the gear head part come in?  In addition to all that fine Italian hide, the rope chain that connects to the wallet is modeled after insulated spark plug wires from the hot rod era and finished off with brass hardware.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Lowly Gentlemen for more products.

aFe is proud to announce the Release of a new Magnum FORCE Stage 2 Air Intake System for Ford Diesel Trucks 08-10 V8-6.4L (td). This system is only available with a Pro DRY S filter.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click aFe for more products.