Experience the wrath of a Torque Monster Intake! No bells, no whistles this intake was built for pulling with massive gains of up to 13 h/p and 32 ft/lbs of torque. In addition, this system is equipped with the first “surface loading” web nano-fiber dry filter: a media that catches contaminants on the surface while accelerating airflow for more POWER! Developed for the US Army Abrahams M1 tanks, the web nano-fiber filtration helps protect your enegine from harsh and dirty environments, extending the life of your motor.

Key Features:
•Show Quality Aluminum Air Intake
•Calibrated Sensor Housing
•Tuned Sensor Adapter
•Web Nano-Fiber Dry Filter – Reusable; The nano-fiber webbing catches contaminants on the surface and accelerates air flow
•Enclosed Heat-Shield w/ Large Velocity Stack
•Removable Pre-Filter Hydro-Shield – Deflects large debris on the surface before clogging up the filter

For more information call “1-800-997-TINT”

Hasport is proud to introduce the new Performance Mount Kit for the J-Series V6 engines (with 04-08 TL or 03-07 Accord 6-speed transmission) into the 88-91 Civic/CRX.

Like all Hasport Mount Kits, it’s designed using sophisticated CAD/CAM software. This kit features:
•Optimized engine placement for ground clearance and axles angle.
•Designed blending strength and style with a lifetime warranty for worry free use.
•Four different bushing durometers for applications ranging from daily driver the 8 second drag car.
•Hasport’s superior customer service.

We recommend using one of the following engines:
•J30A1 from 98-02 Accord or 97-99 Acura CL
•J32A1 from 99-03 Acura TL or 01-03 Acura CL
•J32A2 from 01-03 Acura CL Type S or 02-03 Acura TL Type S

For more information call “1-800-997-TINT”

Mishimoto has just unveiled an aluminum radiator designed for the 2000-2004 Subaru Legacy. Whether you’re a daily driver or you take your car to the track, a Mishimoto Subaru Legacy Radiator is the ideal upgrade to the stock radiator. Mishimoto radiators are engineered to maximize cooling efficiency, boost engine functions, and protect your car from overheating.

Mishimoto radiators are made of 100% brazed aluminum, with a lightweight dual core and polished end tanks. The Mishimoto 2000-2004 Subaru Legacy radiator is a direct OEM fit, making installation effortless with no cutting or modification required. Purchase of the radiator includes a high pressure 1.3 bar Mishimoto radiator cap, a magnetic drain plug, with every component backed by an excellent lifetime warranty.

For more information call “1-800-997-TINT”

Ever see a fantastic garage and say to yourself “why doesn’t my garage look like that?”. Well, ignore the fact that it’s a 7 car garage (and the Ferrari’s), then take the most important first step and cover up that floor. No better way to do that then with RaceDeck.

Offered in six garage tile styles, 14 standard colors, and literally millions of custom colors. RaceDeck floors are great for building your garage-mahal. Even better, installing RaceDeck requires no glues or chemicals, so there’s no mess or toxic fumes – each module simply ‘Snaps’ into place!

For more information call “1-800-997-TINT”

Blackworks Racing is introducing new VTEC Solenoid Covers! These are made from high quality 6061-T6 Billet Alluminum and anodized to perfection. Available now in many different colors!

For more information call “1-800-997-TINT”

Woah. This VisionRacer VR3 would look mighty fine in the RimPros offices, but just as suitable in any mancave/ garage/ living room.

Not your average set of PVC pipes, race seat and monitor; the VisionRacer VR3 is a polished stainless steel, racing simulator chassis system. It uses a Logitech steering wheel, pedals, gear lever and 5:1 audio system. Used along with PS3 (or PC) and LCD Screen the VR3 becomes a realistic racing simulator. Additionally, every VR3 has an individual serial number plate and a complimentary years membership to our community.

For more information call “1-800-997-TINT”

ST suspensions announces their performance coilover for the 2008+ Audi TT 8J, 2WD and Quattro.

The ST suspensions coilover for the 08+ Audi TT (8J) enables the owner to lower their vehicle 0.8-2.0 inches (0.4-1.4 inches Quattro) on the front axle and 0.8-2.0 inches (0.4-1.2 inches Quattro) on the rear axle and retains enough travel to handle maximum load and dynamic loads during driving. ST suspensions coilover with its preset dampening rates permits customized lowering of the suspension and creates an optimized balance of sportiness, comfort and safety.

Important characteristics such as safety, quality and performance are all taken into consideration with each ST suspensions coilover design. Each vehicle application is specifically designed and engineered for a proper range of motion, min/max weight loads and min/max lowering. All these requirements are met while retaining its performance handling characteristics. Each ST suspensions coilover is constructed of zinc plated threaded strut housings and utilized a compression bumpstop with integrated dust boot for additional ride comfort and long term durability.

All ST suspensions coilovers pass stringent German TUV safety and quality testing standards. Each kit is TUV approved.

For more information call “1-800-997-TINT”

Looking for that competitive edge? Look no further, Injen Technology introduces the all new SP3072, a direct bolt-on that delivers 7 h/p and 7 ft/lbs of torque. As an added feature, you get a functional, aluminum air scoop that draws cool air from the front grill. In addition, Injen offers a Web nano-fiber dry filter, the first top-loading filter that stops contaminants on the surface while accelerating air flow.

Key Features:
•MR Technology – Tunes intake to factory air/fuel ratios
•Air Fusion – Adjust short/long term fuel trim levels to factory specs
•Web Nano-Fiber Dry Filter – The first webbed nano-fiber dry filter that catches contaminants on the surface and accelerates air flow for added performance
•A Functional Aluminum Air Scoop
•Calibrated Mass Air Flow Sensor Housing
•Mandrel-Bent Aerospace Aluminum Alloy

For more information call “1-800-997-TINT”

APEXi has just introduced the Hybrid Evolution exhaust for the 2011 Honda CR-Z and 2010+ Toyota Prius!

• Made of SUS304 Stainless Steel
• Easy to install on factory hangers
• Axle Back/Rear Section only
• Piping Diameter: 54mm-60mm
• Tip Diameter: 86mm
• Includes all hardware

Features for the 116AT086J 2010+ Toyota Prius exhaust:
•Made of SUS304 Stainless Steel
•Easy to install on factory hangers
•Axle Back/Rear Section only
•Piping Diameter: 50mm-60mm
•Tip Diameter: 86mm
•Includes all hardware

For more information call “1-800-997-TINT”

Drop Engineering’s high quality aluminum rear subframe spacers will diminish subframe movement to alleviate wheel hop and improve traction. When the soft stock subframe bushings on a 1989-1998 Nissan 240sx become worn, often times wheel hop and a “loose” feeling in the rear suspension becomes an issue.

Under hard driving conditions, these subframe spacers will stiffen the chassis, removing the “sloppy” feeling in your suspension for a more responsive, exact feeling from your car. If you drift, drag race, or just enjoy spirited driving in your Nissan 240sx, you and your car will benefit greatly from these rear subframe spacers. The unique C shape design eliminates the need to remove the heavy rear subframe to install the spacers.

For more information call “1-800-997-TINT”