KW Suspensions announces their stainless steel constructed coil-overs for the 2011+ Dodge Charger & 2011+ Chrysler 300C available in a Variant 1 & Variant 2.

The KW Suspensions coilover for the 2011+ Charger enables the owner to lower their vehicle 1.2-2.6 inches on the front axle and 1.8-3.2 on the rear axle, 1.2-2.1 inches on the front axle and 1.2-2.1 on the rear axle for the 2011+ 300C, and retains enough travel to handle maximum load and dynamic loads during driving. Variant 1 with its preset dampening rates permits customized lowering of the suspension and creates an optimized balance of performance, comfort and safety. Variant 2 is the ideal system for sporty drivers, who also wish to make modifications in ride height and rebound dampening. Drivers are able to adapt the suspension to their driving style.

All KW coilovers pass stringent German TUV safety & quality testing standards.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click KW Suspension for more products.

Is there a little (ok, or big) Hoonigan in your life looking to get behind the wheel of Ken Blocks Fiesta? Since the keys to the real thing are probably hidden somewhere dark, why not get the next best thing?

Hot Wheels and Ken Block have teamed up to give you a chance to have your own Gymkhana around the house with the new Ken Block RC Fiesta. Start with a straight line blast through the kitchen, pull a 90 degree drift through the living room then it the jump over the ottoman.

Do I sense a new YouTube sensation?

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Holiday Gear 2011 for more products.

Centerforce strives to provide top of the line products on today’s market for all performance levels. To do so, Centerforce uses patented processes and constantly tests different materials and designs to find the best combination.

The DYAD DS Multi-Disc Clutches by Centerforce, the next level in high-performance, is now available for all Chevy/GMC 168 tooth V-8 engines with a 10 spline disc, excluding 400” with 2pcs rear main. The DYAD DS part number: 04714820 (Pressure Plate, Disc Set, Floater, Lightweight Steel Flywheel, and Hardware). This new Multi-Disc clutch system replaces the current pressure plate, disc, and flywheel assembly with a higher holding capacity system, designed for a direct bolt in replacement.

The DYAD DS (Drive System) multi-disc clutch design has been developed to meet the needs of modern high-end vehicles. Today’s technology has allowed for engine torque to exceed unprecedented levels and still be driven every day. Drivers need a clutch that can offer; smooth engagement, quiet operation, light pedal, and high-end holding capacity. The DYAD DS offers that and more!

• – PATENT PENDING –
• FULLY DAMPENED CLUTCH SYSTEM DEVELOPED FOR VEHICLES WITH EXTREME POWER LEVELS
• NEW MULTI DISC FLOATING DISC AND DRIVE DISC DESIGN
• SMOOTH ENGAGEMENT AND LIGHT PEDAL EFFORT
• QUIET OPERATION
• HIGH TORQUE CAPACITY 1300 ft/lbs AT THE FLYWHEEL
• GREATER LONGEVITY
• ARP FASTENERS
• EXCELLENT DRIVER CONTROL
• SPECIFICATION CARD INCLUDED!

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Centerforce for more products.

Torque Solution Porsche 996/997 Steel Braided Clutch Line Kit was designed as a direct replacement for the stock rubber line. As many customers have come to find out, the clutch engagement feels very soft/weak and the actual engagement point is difficult to hit on the spot accurately. This results in slipping the clutch more than is needed.

This mod is for anyone who is looking to get rid of that unpredictable clutch engagement. After installation of the stainless line kit will you will notice improved feedback and overall feel of the clutch system. A braided stainless steel shell provides protection against abrasion and corrosion.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Torque Solution for more products.

The South Korean mega conglomerate, Hyundai, produces a variety of world-class products, ranging from seafaring supertankers, to market leading cars. In 1998 Hyundai purchased Kia Motors, and the two automakers united into the Hyundai Kia Automotive Group. Although both vehicle lines are basically produced in the same factory, they prefer to act independently.

Select 2008, 2009 and 2010 Hyundai and Kia models share one other commonality, by simply replacing their OEM air filter with the new AEM 28-20960 DryFlow air filter, they will both discover a lifetime of great performance. This AEM DryFlow filter is a direct replacement for the stock air filter so just install it as you would your disposable paper air filter.

With AEM DryFlow air filters, you’ll get the ultimate combination of airflow, filtration, and improved performance. AEM DryFlow filters use an innovative high performance, oil-free, filtration material that takes the guesswork out of servicing, and allows for easy cleaning. The washable, low-restriction synthetic filter media has high dirt-holding capacity for long service intervals. AEM oil-free DryFlow air filters use a mild, all-purpose synthetic air filter cleaner and they come with easy to follow cleaning instructions. The DryFlow filter media is so durable that it can withstand almost unlimited cleanings. Plus, all AEM replacement air filters for street vehicles come with a lifetime limited warranty so forget about having to buy another air filter for your Kia or Hyundai!

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click AEM for more products.

Competition Clutch now offers a clutch and flywheel upgrade kit for the 240sx, 280z/zx and K24E/DE motors. The clutch assembly uses an OE style 250mm pressure plate, with an OE style disc, pilot bushing and an alignment tool. An option to upgrade to a six puck disc is available which will hold more power, at an additional cost.

The OE style clutch assembly/disc is proven to hold 400 HP, and the six puck is rated to hold 500 HP. The flywheel weighs 18 lbs. and the entire clutch and flywheel assembly weighs in at approximately 35 lbs.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Competition Clutch for more products.

Help the gear head in your life release their ‘inner-Stig’ this holiday season with an official Top Gear T-shirt.

Too many T-shirts in the closet?  No problem.  Top Gear also offers DVDs of all their past seasons, subscriptions to their magazine and much more.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Holiday Gear 2011 for more products.

The story of the Ford Taurus could easily be mistaken for an action-filled Hollywood drama – a glimmer of hope breaking onto the scene and rising to infamy, which then wanes in the face of adversity and questions its identity before finding a renewed spirit and making a triumphant return. Ford brought the Ford Taurus to life in 1986 as a fuel efficient, comfortable and reliable sedan and it did just that, and more. It became an iconic American-made machine, but began losing ground in the 2000s to Japanese auto manufacturers; however, Ford has restored power, fuel efficiency, and style to the Taurus name with the new generation Taurus, and specifically the SHO trim level.

The new Ford Taurus SHO comes with all-wheel-drive standard and Ford’s new twin-turbocharged 3.5L V6 EcoBoost motor. This power plant pumps out 365 horsepower and 350 pound-feet of torque while still delivering an impressive EPA estimated 25 mpg on the highway. And now, 2011 SHO owners can have even more horsepower and performance with K&N‘s 69-3531TS Typhoon performance intake system.

The 69-3531TS intake system is precision designed for the SHO Taurus and provides an estimated 12 horsepower boost with 13 pound-feet of torque at 5327 RPM. This system replaces the restrictive factory intake system with a streamlined aluminum intake tube and oversized K&N air filter for low restriction. It also comes with a heat shield to isolate the incoming air from the radiant heat of the engine.

The 69-3531TS intake system maintains all factory connections, does not require any modifications to factory programming, and is very easy to install. It will provide outstanding air filtration and great looks under the hood. The K&N air filter on the intake is washable and reusable, and the entire system is backed by K&N’s Million Mile Limited Warranty.

The 2011 Taurus, one of the icons of the Ford Motor Company, has returned with a renewed spirit, and owners of the new Taurus SHO can transform their piece of history into legend with the 69-3531TS Typhoon performance intake system.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click K&N for more products.

Skunk2 is proud to introduce its 70mm Alpha Series Throttle Body for Honda’s B-series engines (also compatible with D-, F-, and H-series) in its exclusive, fine shot-blasted surface finish. Skunk2’s 70mm Alpha Series Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Skunk2 for more products.

aFe is proud to announce the release of a new MACH Force XP Race Pipe for the 2007.5-2010 GM Silverado HD/Sierra HD V8-6.6L (td) LMM, P/N: 49-44024.

This system requires an aftermarket electronic module to work properly with this vehicle and is intended for “Race Use” Only.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click aFe for more products.