Part Number 6010S1
The S1 cams for the Mitsu Evolution X are designed for those with the stock turbo up to the 550hp range These cams will
not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of
20-50whp (depending on Turbo) have been seen by simply bolting the S1 cams in.
S1 Cams are designed for a rev range of 3000-7500rpms.
S1 Cams work well on the stock valve springs.
* Intake 264 / 220 @ .040″ / Peak Lift 10.2mm
* Exhaust 264 / 216 @ .040″ / Peak Lift 10.0mm
Part Number 6010S2
The S2 cams for the Mitsu Evolution X are designed for those with 600HP+ in mind. Gains of 40-80whp (depending on Turbo) have been seen by simply bolting the S2 cams in.
S2 Cams are designed for a rev range of 3800-8500rpms.
S2 Cams require an upgraded valve spring.
* Intake 274 / 230 @ .050″ / Peak Lift 11.2mm
* Exhaust 274 / 230 @ .050″ / Peak Lift 11.0mm
For more information call “1-800-997-TINT”