Mishimoto has just unveiled an aluminum radiator designed for the 2007-2009 Nissan 350Z. The Mishimoto Nissan 350Z aluminum radiator is designed to be the ideal upgrade from your OEM radiator by providing up to 30% increased cooling capacity to protect daily drivers and performance cars alike from overheating. The Mishimoto Nissan 350Z radiator features a lightweight dual core made of 100% brazed aluminum and polished aluminum end tanks for improved performance and aesthetics. Due to a design that retains OEM fitment, installation will be effortless with no cutting or additional modifications required.

Mishimoto guarantees superior performance and quality with an unmatched lifetime warranty on all parts.

For more information call “1-800-997-TINT”

Advanced Clutch Technology (ACT) has released high performance Heavy Duty and Xtreme clutch kits for the 2009-2010 Toyota Corolla XRS, 2007-3/2008 Toyota Camry 2.4L I-4 and 3.5L V6, and 2009-2010 Toyota Matrix S and XRS 2.4L I-4.

ACT’s new clutch kits for the applications listed above feature a Heavy Duty or Xtreme pressure plate that incorporates hardened diaphragm fingers for decreased wear. The Heavy Duty pressure plate provides a 29 percent increase in clamp force over the stock unit and the Xtreme pressure plate provides a 61 percent increase in clamp force over the stock unit. Both pressure plates meet SFI Specfication 1.1.

The ACT Street Clutch Kits combine a Heavy Duty or Xtreme pressure plate and a Performance Organic Street Disc. The disc features special performance organic friction materials able to withstand increased heat and abuse, steel-backed linings for high-burst strength and modifications engineered for quicker shifting. ACT Street Clutch Kits provide a moderate and consistent pedal feel, smooth engagement and significantly improved durability. The torque capacity is increased up to 310 to 390 lbs./ft., depending on your pressure plate selection.

ACT Race Clutch Kits will hold 400 to 500 lbs./ft. of torque depending on your pressure plate selection. They are combined with 6- or 4-pad spring-centered, or rigid hub cerametallic discs, which are very durable while allowing for quick shifting. The Xtreme Discs are for high-power engines and recommended for track use only.

For more information call “1-800-997-TINT”

Unleash the hidden power of 18 h/p and 20 ft/lbs of torque from your G8!

Superior engineering and unparalleled technology is what goes into the all new PF7040! This race inspired cold air intake comes equipped with the patented MR step down process and Air Fusion. In addition to its patented tuning process, this system comes with a Web nano-fiber dry filter that stops contaminants on the surface while accelerating air-flow. Protect your engine from harsh and dirty environments with the web nano-fiber dry media as designed for the US Army Abrams M1 tanks. Trust the company that brought you: “The World’s First Tuned Air Intake System”

Key Features:
•MR Technology – tunes intake to factory air/fuel ratios
•Air Fusion – adjusts short/long term fuel trim levels
•Ultra-Flow, Web Nano-Fiber Dry Filter
•Machined And Tuned Sensor Adapter
•Calibrated Sensor Housing

For more information call “1-800-997-TINT”

The engineers at AEM saw potential in the GM-900 line up of models with the 4.8L and 5.3L engine configurations, and set they out to design a cold air intake system to unleash the true power of the GM powerplant. The air filter chosen for this project was a big 5-inch inlet oval filter which provides plenty of air flow and outstanding engine protection. After the overall design was finished, real world performance testing began. Dynamometer testing on three different vehicles showed an estimated increase of 10 horsepower and 10 ft-lbs of torque at 5100 RPM. This new intake fits a variety of 2009-2011 Chevrolet and GMC pick-ups and SUVs.

Key Features:
•Dyno Proven Power Gains
•Enhanced Engine Sound
•Heavy Duty 3/16″ Brackets
•Double Wound Hose Clamps
•Lifetime Limited Warranty
•Durable Roto-Molded Intake Tube and Custom Sealed Airbox
•DRYFLOW Air Filter •Dryflow Synthetic Filter Media – No Oil Required
•Thick 3D Media for increased airflow and higher capacity
•Incredibly easy to clean

For more information call “1-800-997-TINT”

From the factory excess crankcase vapors, residual oil and moisture are vented back into the intake manifold and crankcase ventilation system. Capturing this oil mist before it reenters the engine reduces detonation and deposits on the intake track, including the valves themselves and from lowering the efficiency of the intercooler.

This is accomplished by having two tanks; the first tank collects the excess crankcase vapors, residual oil and moisture that are vented back into the intake manifold. The second tank collects the excess crankcase vapors, residual oil and moisture from each cylinder head. If both were plumbed into the same tank then the crankcase ventilation system could not operate the way it was designed to – the Moroso Kit is the only Subaru air separator that accomplishes this.

The Billet Aluminum bodies of this Air Oil Separator kit compliment any engine compartment and can be polished, chromed or powder coated for a custom look. Each Separator has a billet aluminum clamp, a bottom drain with an elbow that makes draining the collected oil a mess-free proposition. Includes stainless steel mounting brackets, 1/2″ inlet and outlet fittings, 66″ of 3/8″ diameter and 66″ of 1/2″ diameter rubber hose for plumbing the Air-Oil Separators inline. Also, two genuine Subaru throttle body gaskets are included in each kit.

For more information call “1-800-997-TINT”

Out of all Ford F-150 models available, the SVT Raptor is by far, the most exciting truck to drive. Geared toward higher performance than the other models, the F-150 SVT Raptor is a high-powered pickup truck designed for off-road domination. Ford’s website states that the Raptor gets 411 horsepower and 434 ft/lb of torque from models equipped with the 6.2L engine. The SVT Raptor’s bold appearance, aggressive power and durable construction make it a great truck to own.

In order to squeeze more power and torque out of your 6.2L engine, K&N designed a performance air intake system 77-2579KTK for 2010 Ford F-150 SVT Raptor models that have the 6.2L engine. The 77-2579KTK was dyno-tested and produced an estimated gain of 20 horsepower at 4830 rpm. This is a significant amount of extra power resulting from a simple air intake installation.

Detailed installation instructions with color photo illustrations are included in the 77-2579KTK air intake system packaging. Since the OEM airbox and washer reservoir are mounted together, the K&N air intake system also includes a new washer reservoir to replace the removed one. When it comes to adding significant performance to your Ford F-150 SVT Raptor, K&N’s 77-2579KTK is one of the most cost-effective ways available.

In addition to a guaranteed performance boost, the 77-2579KTK was designed with a washable high flow K&N air filter, part RF-1044XD, so it can be cleaned, oiled and reused. This air filter can go for up to 100,000 miles between cleanings depending on driving conditions. Once it does get dirty K&N’s Recharger Kit makes this process very simple.

K&N backs the 77-2579KTK with a million mile limited warranty. It will be the last air intake and filter your Ford F-150 SVT Raptor will ever need.

For more information call “1-800-997-TINT”

Upgrade your stock radiator stay and let it all stand out with the Blackworks Radiator Stay. Made from quality aluminum and made here in the USA! There are many colors to choose from.

For more information call “1-800-997-TINT”

After months of testing different 1-2-4 and 1-4 exhaust configurations for performance and sound, we are proud to release the much anticipated tuned – GReddy PE-R stainless steel exhaust…

GReddy VR Metal Head Gaskets features a stopper type center layer to completely seal the cylinder by adding extra torque around each cylinders. Outer layers are coated with a thin layer of nitrile rubber to ensure good seal to the head and deck surfaces. Designed to with stand high boost and power. These are now used in all of our big bore complete engine builds.

The factory R35 fuel rail has a restrictive boss with in the tube which interrupts the fuel flow for high power application. GReddy Fuel Delivery Tube will improve the flow capacity by straightening the main tube with the injector center line as well as increasing the inner diameter of the main tube to 14mm. We were also able to increase the inner diameter of the connecting line to each bank to 10mm by using AN8 fitting and -8 Teflon lined fuel safe hose.
•With the included flanged fittings and -8 AN fittings you can mount the factory fuel pressure regulator and the dampener right on the rail or customize with upgraded fuel pressure regulators.
•By separating the mounting bracket from the main tube, the mounting height are adjustable, keeping the original injector mounting angle.

For more information call “1-800-997-TINT”

Ever try to get into your WRX or STI without having to move your steering wheel or your seat around, only to have your legs suffer the “squeeze” between the seat and the steering wheel? There is a solution, and GT Spec has got you covered!

Introducing the new D-Shaped Steering Wheel by GT Spec. It is a direct OEM replacement steering wheel that retains full function of the factory steering wheel controls as well as the air bag. Stitching on the steering wheel comes in Red, Blue or Black.

For more information call “1-800-997-TINT”

Mishimoto has just released a 19 row X-Line Universal Oil Cooler Kit. Enthusiasts who push their performance cars to the limit understand the importance of keeping their oil temperatures low to prevent damage, or even seizure of the engine. The Mishimoto Universal 19 Row X-Line Oil Cooler Kit will extend the life of your engine by ensuring your essential high-wear engine components such as piston rings, skirts and cam bearings are sufficiently lubricated with cooler oil. Included with the purchase of the 19 Row X-Line Oil Cooler Kit are high-quality, stainless steel braided hose lines and all necessary adapters for universal installation.

For more information call “1-800-997-TINT”