Once again AEM is raising engineering standards with an all new series of innovative air intake systems.  With a revolutionary ETI module and fully integrated design, we have eliminated the need to detune or stage an intake tube diameter as it crosses the MAF sensor. The sensor is electronically adjusted to read proper air density instead of using physical tube designs intended to “trick” the MAF reading. The result is bigger horsepower and torque gains.

Most modern fuel injected cars use a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube because the airspeed is reduced. This causes the MAF sensor to “under report” air flow causing a lean condition at worst and a Check Engine Light at best. To accommodate MAF sensor reporting, many intake systems reduce the diameter of the intake tube near the MAF sensor to stock or near stock size because of the need to maintain the correct air speed for the sensor to report the correct flow rate to the ECU. AEM’s ETI Intake System is an alternative design approach that allows the intake tube to maintain its diameter resulting in more air flow into the throttle body.

The ETI Intake System allows AEM to tune an engine for even more power by avoiding any tube down-sizing that will reduce overall airflow and horsepower. Instead the ETI electronically communicates with the MAF sensor to ensure an accurate amount of fuel is being delivered even though the tube is larger in size than the stock system. This means the vehicle maintains the calibration as intended by the factory while enjoying the benefits of our custom designed aftermarket intake system.

Cosworth FSL High Performance Head Gaskets for the Nissan VR38DETT include all of the features you expect from Cosworth Head Gaskets to ensure maximum power and performance.

Cosworth Head Gaskets are engineered to seal in power under the most demanding conditions. Constructed from stainless steel with a folded stopper layer, each application features superior sealing compared to conventional multi layer steel gaskets. Additionally, Cosworth High Performance Head Gaskets are manufactured from pre-coated die cut stainless steel resulting in uniform coating distribution and consistent shape.

* Individual die cut layers of stainless steel with superior consistency compared to laser cut gaskets
* Pre-coated stainless steel with a 0.25 micron layer of nitrile rubber ensures consistent distribution of coating with no high or low areas
* Manufacturing dimensional tolerance of +/- 0.001
* Die cut manufacturing process ensures smooth edges, unlike laser cut gaskets
* Cosworth gaskets feature a folded stopper layer for additional torque around each cylinder. The width of sealing area is specific for each application thereby providing ultimate sealing properties
* Available in a range of thicknesses for specific applications
* Bore size: 98mm Thickness .8mm

Are you a nonbeliever of aftermarket air intakes and think that what Porsche created for the 996 Turbo is truly the best? Well, Agency Power has developed the ultimate air intake system for the new age Porsche 996 Turbo owner. We introduce the Agency Power Dual Flow Air Intake Kit for the Porsche 996TT. The intake will fit on the standard 996TT and X50 rear deck lids. Others such as the GT2 deck lid may require modifications. This air intake uses the factory OEM back half of the intake box which includes the fault free OEM MAF tube. What we have done is beefed up the front cover with a full composite unit which is designed to intake more air volume which is then traversed over the flat panel air filter. The biggest improvement of this box is the dual snorkel. We have built a composite intake scoop which mounts on the bottom of the left side of the engine deck lid. This scoop takes the airflow from the vented deck lid and pushes it through the snorkel piece and down into the stock air box. The purpose of this design is to increase air flow to the factory filter.

In high speed or racing conditions, the intake needs to be able to get as much air as possible to keep these turbos working efficient. This dual snorkel unit combined with our updated OEM box cover and a K&N flat panel air filter does wonders for your overall vehicle performance. These made in the USA (Arizona) composite parts are a great add-on to your 996TT.  Included with the intake are the aluminum Agency Power badge and foam strips for a precise air tight seal from the snorkel to the box. The intake kit does not include the aftermarket drop in filter. Any of the OEM replacement filters will work with this box.

Looking for some crazy bolt-on power?  The all new Injen SES1385ICP will deliver all the speed and power you need, on demand!  This eye catching upper intercooler piping will pack on an additional 9HP and 11ft. lbs. of Torque to the wheels.  Go with Injen Technology, the only intake company that tunes intakes with the famous patented MR step-down process and Air Fusion.

Features

• Two piece mandrel bent tubing
• Injen’s polished trademark
• Tuned intercooler piping
• 304 stainless steel clamps
• Reinforced silicone connecting hose
• Reduced end fitting for direct bolt-on
• No cutting or drilling of any factory parts

COBB Tuning announces the immediate availability of the COBB Knob, the hottest shift knob available for 8th gen Honda Civic Si. The COBB Knob is a fusion of the highest quality materials that, when properly mated, produce a shift knob that feels as good as it looks. Shifting a Honda has never been this exciting!

Here’s a treat, Injen Technology has just released Cold Air Intakes for the Hyundai Genesis 2.0T and 3.8L V6.  The next generation of tuner rear-wheel drives has just landed on US soil.  The Hyundai Genesis is guaranteed to satisfy any fanatic’s addiction to speed with a 10HP/17ft lb bump for 2.0T motors or a 14HP / 12ft lb increase for 3.8L V6 engines.  The SP1386 for 2.0T motors and the SP1390 for the 3.8L V6 both are equipped with the famous patented MR step-down technology and Air Fusion.  Combine that with a state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter and you’re ready to give your rear-wheel driver the competitive edge it needs. Injen Technology, the company that brought you the only patented tuning process and “The World’s First Tuned Air Intake System”.

GTSPEC’s Ladder Braces are designed with one purpose: to give you Mitsubishi Evolution X & RalliArt an edge over the competition and shave time off your laps. Most OEM designs are made for the average consumer in mind, not the ones seeking the ultimate in performance and handling. GTSPEC’s Ladder Braces are manufactured from Military-Grade 6061 Aluminum and address the weak points in OEM under-body design. By connecting different points of the vehicle’s frame, we have successfully increased rigidity while reducing chassis flex. Whether on the street or at the track, GTSPEC’s Ladder Braces deliver a sharper handling and more responsive vehicle.

The Fidanza 1.0 Budget Kit for GM LS Motors can be used on any General Motors LS series engine (excluding the Corvette ZR1) for affordable performance.  This kit features a high clamp load pressure plate and a sprung hub organic street disc capable of holding 440ft lbs of torque.  Pedal pressure is minimal with smooth engagement, perfect for a stock replacement or LS with bolt-ons.  If you purchase the kit together it is balanced in house to ensure proper performance.

Moroso is proud to release a more competitively priced version of their original Sealed Batter Box.  This new Sealed Battery Box is ideal for relocating a battery to the rear of any race, street or show vehicle with or without a rear firewall.  The new Moroso Sealed Battery Box holds a Series 24 battery with either top-post or side-post terminals.  Convenient quick-lock fasteners access from the top eliminate the need to reach under in tight spaces to secure a nut and an airtight lid is sealed with closed-cell foam to prevent battery gasses from entering the vehicle.