aFe is proud to announce the release of the OE Replacement filter fitting the 2011 Honda CR-Z I4-1.5L. This filter is available in Pro 5R (P/N: 30-10213) and Pro DRY S (P/N: 31-10213).

For more information call “1-800-997-TINT”

A new addition to our range of thermal management and cooling system upgrade components, the Cosworth LowTemp Motorsport Thermostats are engineered to precisely control engine temperature in demanding conditions found in typical motorsport use. Each Cosworth LowTemp Motorsport Thermostats is manufactured to the highest standards and includes a unique feature that accurately controls coolant flow to prevent temperature and coolant surge that may cause engine damage.

Available for popular Japanese performance vehicles such as Subaru, Nissan, Honda, Mitsubishi and Toyota engineered with optimum temperature range in mind for high performance racing use.

For more information call “1-800-997-TINT”

New from Synapse Engineering is the Synchronic DV Charge Pipe Kit for 2011+ Nissan Juke 1.6L Turbo!

The Synchronic DV is a compact, zero-diaphragm, high-flow Diverter Valve actuating within 25 milliseconds. The DV body is near-net, investment cast, aerospace-grade Aluminium followed by CNC machining of all components including the forged 6061 actuator assembly. Each DV unit is tested to withstand 60 psi to ensure no boost leak.

The Synapse Engineering Charge Pipe of this kit is designed to eliminate unnecessary air flow restrictions before the throttle body. The light weight 6061 aluminium mandrel bent charge pipe provides a secure mount for the OE Intake Air Temperature sensor. This DV Charge Pipe kit is a “plug & play” kit that mates with all factory equipped components.

Key Features
•Patented Synchronic actuator design in DV for unmatched fast actuation
•Charge Pipe installation is secure mounted on OE mounting locations
•Powder-coated black Charge Pipe to preserve the OE look and feel
•Secure mount with aluminium IAT sensor welded onto Charge Pipe
•Synapse Boost Connect™ One-Touch pneumatic fittings for installation ease
•Compact and light weight design for both street and race use

For more information call “1-800-997-TINT”

Get ready to unleash some serious power from your 3.7L V6, with Injen’s all-new PF9022!

This air intake system will convert your pony to a Mustang on steroids, delivering a whopping 13.45HP and 14.79 ft/lbs of torque. In addition, Injen’s patented step-down tuning process will keep your engine running to factory safe air/fuel ratios, giving you a little peace of mind. As an added value, you’ll get protection from the first surface loading filter: the nano-fiber dry filter will shield your engine from harsh and dirty environments, extending the life of your motor!

Key Features:

•MR Technology – tunes intake to factory air/fuel ratios
•Air Fusion – adjusts short/long term fuel trim levels
•Web Nano-Fiber Dry Filter
•Machined And Tuned Sensor Adapter

For more information call “1-800-997-TINT”

Eibach PRO-KIT is the perfect answer for most frequently-driven street cars. It’s our legendary spring system that dramatically improves both a vehicle’s performance and appearance.

PRO-KIT lowers your Focus’s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach PRO-KIT is the finishing touch to a winning recipe for performance. PRO-KIT also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Pro-Kit #35134.140
•High Performance Handling and Aggressive Good Looks
•Lower Center of Gravity — Lowers Focus 0.8″ Front and 0.8″ Rear
•Stop Quicker, Corner Faster and get Better MPG
•Excellent Ride Quality
•Million Mile Warranty

Every Eibach PRO-KIT is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, PRO-KIT provides the ultimate balance to take your passion for driving to a whole new level.

For more information call “1-800-997-TINT”

AEM Performance Electronics is pleased to introduce its Billet Aluminum Universal High Flow -10 AN Inline Fuel Filter (part #25-201BK).

The AEM High Flow -10 AN Inline Fuel Filter is CNC machined from 6061-T6 Aluminum and Hard Anodized Black. AEM’s engineers designed this filter with the racer in mind and with the intention of maximizing flow, filtration and ease of installation. The end caps are machined with -10AN female fittings with o-ring receiver groove that allow the filter to flow up to an astonishing 12.32 gpm @ 45 PSI and 2.63 gpm @ 6 PSI. All sealing o-rings and gaskets are made of Viton for outstanding performance when using gasoline, alcohol or gasoline/alcohol blended fuels. The commonly available replacement filter cartridges filter as low as 7 microns. The standard 2” OD allows for easy mounting virtually anywhere in the vehicle.

UNIVERSAL HIGH FLOW -10 AN INLINE FUEL FILTER FEATURES
•Machined from 6061-T6 aluminum and hard anodized black
•Flows up to 12.32 gpm @ 45 PSI and 2.63 gpm @ 6 PSI with -10 port fittings
•Filters as low as 7 microns
•Viton o-rings and gaskets ensure outstanding performance when using gasoline, alcohol or gasoline/alcohol blended fuels
•End caps are machined with -10 AN female fittings with o-ring receiver groove
•End caps have pressure intensifiers for greater sealing of end gaskets
•2” OD x 10” length for easy mounting
•Commonly available replacement filter cartridges
•Laser etched with AEM logo, flow and filter replacement information

For more information call “1-800-997-TINT”

Torque Solution introduces the new Billet Engine Mounts for all 2010+ V8 Camaros! All Torque Solution engine mounts are made with both quality and performance in mind. These mounts are a direct replacement for the OEM factory mounts. OEM mounts are made of sub-par material with rubber bushings that are infamous for deteriorating, cracking, and tearing over time. Heavy racing or spirited driving tends to speed up that process. Torque Solution has you have covered! Our mounts are made out of high grade 6061 billet aluminum material for weight savings and polyurethane bushings for long life and consistent performance. This combination allows the wasted energy to be transferred to the wheels where its needed for optimal performance.

Features:
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t’s
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 7sec e.t. torture tested
•Black anodized
•85A durometer bushings ( Not Solid )
•LifeTime Warranty
•Made in USA

For more information call “1-800-997-TINT”

Moroso is proud to present the all new Honda/Acura K-Series Oil Pan!

Key Features:
•Designed to be used with the Acura RSX oil pump assembly
•Oil Pan has a thick steel rail with a sump that is 5.5″ deep, 16.75″ long and 9″ wide
•Features a race proven trap door assembly and anti-slosh baffle that keeps oil contained in oil pump pickup area during road racing and drag racing
•Extra capacity: holds two more quarts than stock
•1/2″ NPT fitting for supercharger or turbo drain back
•1/2″ NPT fitting for oil temperature sender
•Magnetic drain plug

For more information call “1-800-997-TINT”

Magnaflow is proud to present the newest additions to our line up of Catback Exhaust:
•15487 – an axle-back exhaust for the 2011-2012 Scion tC
•15556 – a catback exhaust for the 2010-2012 Mazda 3 w/ the 2.0L/2.5L engine

For more information call “1-800-997-TINT”

BlackWorks Racing (BWR) Race Breather Box Kit is designed to replace the factory PCV system and vent to atmosphere. Our cans are CAD designed and CNC Press Punched using the latest state of the art technology. The -10 Plugs are welded from the inside to top off that ultra clean look. This kit includes all fittings, plugs, clamps, hose and catch can, Ideal for all turbo setups. (Note this kit is designed to mount in the factory battery tray for a simple clean install on vehicles 92-00 Civic and 94-01 Integra).

Kit Includes:
•1x AL6061 CNC Press Punched Catch Can
•2x K&N Filters
•6x Black -10AN Straight Fittings
•2x Black -10AN 45 Degree Fittings
•2x Block Plugs (CNC M28 to -10 Adapter)
•-10AN Black Braided Lines (10 Feet)
•1x Black BWR Billet Battery Tie Down
•Includes 2 -10 Weld On Fittings for your valve cover ventilation lines
•Lifetime Warranty
•Made In The USA!

For more information call “1-800-997-TINT”