Advanced Clutch Technology (ACT) has released high performance clutch kits for the 2008-2010 Scion xD.

ACT’s performance clutch kits for the Scion xD feature a Heavy Duty pressure plate that incorporates hardened diaphragm fingers for decreased wear and provides a 25 percent increase in clamp force over the stock unit. The Heavy Duty pressure plate meets SFI Specification 1.1.

The ACT Street Clutch Kit combines a Heavy Duty pressure plate and a performance street disc. The disc features special performance organic friction materials able to withstand increased heat and abuse, steel-backed linings for high-burst strength and modifications engineered for quicker shifting. The ACT Street Clutch Kit provides a moderate and consistent pedal feel, smooth engagement, significantly improved durability and increased torque capacity up to 240 lbs./ft.

ACT Race Clutch Kits combine a Heavy Duty pressure plate with an Xtreme Race Disc and will hold up to 305 lbs./ft. of torque. The cerametallic Xtreme Race Discs are available in 4- and 6-pad, spring-centered and rigid-hub designs and are very durable while allowing for quick shifting. The Xtreme Race Discs are for high-power engines and recommended for track use only.

For more information call “1-800-997-TINT”

Honda’s introduction of the new CR-Z is timed perfectly to combat today’s steep gasoline prices. So enjoy the awesome fuel economy and bolt on some handling fun! Install this new Progress Technology Rear Anti-Sway Bar System for your CR-Z. The PROGRESS rear anti-roll bar is a hefty 19mm alloy steel fabrication. The bar is silent and non-adjustable, as it bolts into the OEM rear axle beam assembly. The installation is quick and easy, and requires only six fasteners (supplied) using OEM hole locations. The two OEM plastic wind deflectors on the axle beam can be trimmed using the template supplied, and reinstalled for optimized under-car aerodynamics. This system includes all necessary hardware components and installation instructions.

This new rear anti-roll bar will improve chassis balance, quicken steering response, and improve driver confidence by minimizing the uncomfortable body “lean” while cornering. All Progress anti-sway bars are manufactured in-house, feature precision MIG-welded ends, and are powder coated metallic graphite gray.

For more information call “1-800-997-TINT”

CUSCO is proud to release a new line of gauges featuring three models, boost pressure, water temperature, and pressure. The Racing meter is recommended for both competition and street use. CUSCO Racing Meters are 100% made in Japan to bring you the most advanced technology accompanied by the highest of product quality.

CUSCO Racing Meter TEMP METER
Water & Oil Temperature Capability
Includes: Gauge, wiring, temperature sensor, gauge holder, control switch, switch bracket
Display: 50°C ~ 150°C (2°increments)

CUSCO Racing Meter PRESS METER
Oil & Fuel Pressure Capability
Includes: Gauge, wiring, pressure sensor, gauge holder, control switch, switch bracket
Display: 0 kPa ~ 1000 kPa (20 kilopascal increments)

CUSCO Racing Meter BOOST METER
Boost pressure
Includes: Gauge, wiring, boost sensor, gauge holder, control switch, switch bracket
Display: -100 kPa ~ 0 kPa ~ +200 kPa

Features:
•Large 60mm gauges
•Peak and warning function
•High quality bezel with LED technology
•Night time auto dimming feature (illumination)
•High precision step motor technology for precise reading
•Sensor and gauge holder included
•White LED lettering on top of black
•No control box necessary (only needs the gauge & sensor)

For more information call “1-800-997-TINT”

Mishimoto Honda Civic SI radiator hoses are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

Mishimoto guarantees superior performance and quality with an unmatched lifetime warranty on all parts.

For more information call “1-800-997-TINT”

Blackworks is proud to present our new 3 Point Front Strut Tower Bar and new Rear Strut Tower Bar for the 92-00 Honda Civic & 94-01 Acura Integra. These Strut Bars are made from High Quality T6061 aircraft grade aluminum. Our Brackets are designed using the most state of the art CAD software in the industry to ensure quality. These are individually handcrafted and TIG Welded for strength and each one is passed through our multipoint quality control divisions. Designed to help prevent shock tower flex, expect massive improvements in your high speed cornering.

For more information call “1-800-997-TINT”

Skunk2 is proud to introduce its 70mm Alpha Throttle Body for Honda’s B-series engines (also compatible with D-, F-, and H-series) in its exclusive, fine shot-blasted surface finish. Skunk2’s 70mm Alpha Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price.

Skunk2’s Alpha Throttle Bodies are precision die-cast from high-quality materials and include features previously offered only in our Pro Series line, like countersunk, stainless steel mounting bolts, solid brass throttle plates, fully machined bores, and idle adjustment screws for fine tuning. All Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesn’t just provide more flow but retains smooth drivability and OEM throttle characteristics.

A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2’s Alpha Throttle Bodies for B-series engines feature a large, 70mm bore, which results in significant horsepower gains throughout the powerband on heavily modified, naturally aspirated applications and even more on forced induction ones.

Skunk2’s 70mm Alpha Throttle Body offers Skunk2 performance, industry-leading customer service, and a limited-lifetime warranty policy, all at a price comparable to competitors’ budget-minded throttle bodies. Unlike the budget-minded throttle bodies, though, only Skunk2 Alpha Throttle Bodies ensure precise fitment and the peace of mind of knowing that a Skunk2 representative is just a phone call or email away.

For more information call “1-800-997-TINT”

 
Eibach PRO-KIT is the perfect answer for most frequently-driven street cars. It’s our legendary spring system that dramatically improves both a vehicle’s performance and appearance.

PRO-KIT lowers your Legacy’s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach PRO-KIT is the finishing touch to a winning recipe for performance. PRO-KIT also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Pro-Kit #7722.140
•High Performance Handling and Aggressive Good Looks
•Lower Center of Gravity — Lowers Legacy 1.0″ Front and 1.0″ Rear
•Stop Quicker, Corner Faster and get Better MPG
•Excellent Ride Quality
•Million Mile Warranty

Every Eibach PRO-KIT is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, PRO-KIT provides the ultimate balance to take your passion for driving to a whole new level.

For more information call “1-800-997-TINT”

New Blackworks Billet Shift Knobs are made from high quality billet aluminum. CNC-machined from high grade, billet aluminum, laser engraved BWR Logo. MADE IN THE USA!

For more information call “1-800-997-TINT”

New for 2011, GReddy Racing Sport (RS) Cat-Back Exhausts combine a high flow straight-through design, polished stainless-steel construction and aggressive sound, to produce a track worthy combination for the street. These full Stainless-Steel sport exhaust systems, combine the key performance features from the Racing Ti-C system, but change-up the decorative GReddy Titanium burnt-Tip and GReddy embossed muffler, with a GReddy SUS304 tip and GReddy badged-muffler, respectively.

A look reminiscent of the classic JDM “TRUST PEII” design. Other changes include some applications with improved piping diameter transitions & routing improvements. (The standard GReddy Tri-mounted tip is compatible with the Racing Ti-C’s 115mm & 102mm burnt Titanium Tips, now also sold separately as an option for the RS systems.) The end result, reduce price for the consumer while maintaining the important features like Fitment, Sound, Flow and Performance, that GReddy is know for.

For more information call “1-800-997-TINT”

Stronger, more durable, adjustable and capable of withstanding much higher boost levels than the factory item, the Mitsubishi Dual Port is an ideal bolt-on performance replacement for anyone intending to increase the boost on their Mitsubishi EVO or Ralliart Colt.

Featuring both the recirculating and vent-to-atmosphere ports, the Dual Ports offers the best of both worlds with quiet operation during normal driving and full flow benefits of an atmospheric BOV under full throttle.

Available for Mitsubishi EVO or Ralliart Colt in either RED or BLACK.

For more information call “1-800-997-TINT”