The K-Tuned Ram Header at first glance looks like a pretty crazy design. Essentially it is a long tube header that has been pushed up into the engine bay to provide much better ground clearance. However, there is another purpose to all the turns that you are seeing. They keep the exhaust gases hot and when the exhaust is hot it moves out more quickly. So I bet your next question is, “Does it make power ?” The answer is yes. This header is definitely the top dog of K-Tuned swap headers. It beat both our K-Tuned 4-2-1 Swap header and even our 4-1Race header during dyno testing. Also when tested side by side against a header with a comparable tube length we came out ahead again.

The K-Tuned Ram Header features full 304 stainless steel construction with equal length tubing and a proven stepped design. It starts with 44mm primaries to 47mm to 50mm and finishes with a 65mm or 2.5” exit. It also uses three true merge collectors at all transitions to maximize the exhaust flow. This header has been specifically designed for both high end and midrange horsepower gains. Now for the best part, not only does this header offer excellent ground clearance and shifter box clearance it also fits both K20 and K24 engines in the DA, EG, EK and DC2 chassis. Sorry guys it does not fit the EF chassis.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click  K-Tuned for more products.

The Mishimoto BMW E46 (M3) Silicone Intake Boot is made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Mishimoto for more products.

Run out of Fuel on your Evo X and need more fuel pump?? Here is the answer to your fuel issues.

We have designed a 6061 Billet Fuel Pump Holder to accept Walbro 255lph pumps along with Aeromotive, Deatschwerks, and FullBlown 340lph Pumps.

The 340LPH fuel pumps will give you enough fuel to make over 500whp on your Evo X w/ E85. Plenty for stock motor applications. These are all E85 Compatible.

Kit Includes:

• Pump Holder
• Flexible Hose
• Filter
• Set Screws to hold pump in place

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Torque Solution for more products.

Eibach PRO-KIT is the perfect answer for most frequently-driven street cars. It’s our legendary spring system that dramatically improves both a vehicle’s performance and appearance.

PRO-KIT lowers your Cruze’s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach PRO-KIT is the finishing touch to a winning recipe for performance. PRO-KIT also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Pro-Kit:

• High Performance Handling and Aggressive Good Looks
• Lower Center of Gravity — Lowers Cruze 0.8″ Front and 1.2″ Rear
• Stop Quicker, Corner Faster and get Better MPG
• Excellent Ride Quality
• Million Mile Warranty

Every Eibach PRO-KIT is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, PRO-KIT provides the ultimate balance to take your passion for driving to a whole new level.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Eibach for more products.

The full size pickup market is a never ending battle when it comes to styling, powerful engines, and fuel economy. These characteristics determine which manufacture has the toughest, user friendly pickup. 2010 and 2011 Toyota Tundra models offer an ample amount of room concealed inside an aggressively styled exterior. Four engine options are available based on the designated packages offered. The latest engine to join the lineup is the 4.6 liter i-Force V8. It packs a punch with an estimated 310 horsepower; not to mention, it offers a not-too-shabby 15/20 estimated miles per gallon city/highway. Any truck lover can appreciate what Toyota has done here.

For those that want the most out of their 2010 or 2011 Tundra with a 4.6 liter engine, K&N offers an air intake system that will allow for increased horsepower and acceleration. The system is an AirCharger air intake system with part number 63-9035. The intake reduces restriction in the intake path by removing the restrictive factory air box, air filter and intake tubing and replaces them with K&N’s smooth bore intake tube and a legendary K&N high flow air filter.

K&N dyno tests each and every intake system. The 63-9035 provided an estimated horsepower increase of 13 horsepower at 5517RPM, and an additional estimated 10.61 pound feet of torque to the wheels.

The K&N air filter provided in the kit is washable and reusable, and oversized for high flow rates and less restriction. It is made of a specially woven cotton media surrounded by a rigid wire mesh for structural integrity and durability. All of the components included in 63-9035 are so tough that K&N deems this intake worthy of their industry-leading Million Mile Limited Warranty. It will provide 2010 and 2011 Toyota Tundra 4.6L owners power and performance for a lifetime.

Usually installs in 90 minutes or less using K&N’s simple installation instructions and its air filter can be used for up to 100,000 miles before servicing is needed, depending on driving conditions.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click K&N for more products.

Whiteline‘s Anti Geometry Kit for 2011 Subaru WRX STI (excludes WRX) replaces the front control arm rear vertically mounted bushing and feature light weight aluminium housing with high performance/ low compliance bearings for optimum dynamic alignment under the high rigours of motorsport applications. Positive static caster gains can also be achieved by the offset orientation of the bearing and all motorsport kits come in ‘STEALTH BLACK’.

Unique to any Whiteline Anti Geometry kit before it, KCA425M allows STI you to tune geometry from Anti Lift to Anti Dive via a combination of recommended spacers delivering a window of handling behaviour to suit varying track, vehicle set up and driver needs. Use KCA334M for 2011 WRX and non turbo models.

With a Whiteline Anti Geometry kit fitted to your 2011 STI, more compliant suspension will be induced during braking and accelerating. This will benefit traction, as the wheel will be able to track the tarmac more precisely. In terms of balance, the front end will have a proportionally lower roll resistence during traction or braking. Aids in reducing the power understeer effect that is present in these vehicles and resulting in a better handling vehicle. Anti dive helps manage weight transfer under braking, resulting in a more balanced chassis at high speed/ lateral loads. With added caster gains resulting in a sharper, more precise steering feel.

“Anti” features in suspension systems are a characteristic that can be used to influence the stiffness of the front or rear suspension under traction forces(under braking or accelerating). The individual terms are relatively straightforward and self-explanatory with the “anti” reducing or totally restricting the characteristic (lifting or diving). In the front suspension there may be levels of anti-dive during braking and anti-lift during accelerating (assuming traction to the front wheels is present).

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Whiteline for more products.

Skunk2 is proud to introduce its 74mm Pro Series Throttle Body for Honda’s B-series engines (also compatible with F- and H-series) in its exclusive, Black Series finish. Skunk2’s 74mm Pro Series Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow.

Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesn’t just provide more flow but retains smooth drivability and OEM throttle characteristics. Each Pro Series Throttle Body is designed using the latest CAE (Computer Aided Engineering) tools, which results in a unit that exceeds industry standards. Pro Series Throttle Bodies are also CNC machined from forged, billet 6061-T6 aluminum and hard anodized for durability in Skunk2’s signature Black Series finish. Additionally, Skunk2’s unique design relocates the MAP sensor underneath and eliminates the OEM water passages for cooler operation and a cleaner appearance. Pro Series Throttle Bodies are also compatible with OEM throttle cables, which simplifies installation. Each Skunk2 Pro Series Throttle body also features sealed bearings for smooth operation and a genuine, integrated Skunk2 badge. All necessary hardware and a new throttle body gasket are included for trouble-free installation.

A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2’s Pro Series Throttle Bodies for B-series engines feature a large, 74mm bore, which results in significant horsepower gains throughout the powerband on heavily modified, naturally aspirated applications and even more on forced induction ones.

FEATURES:

• Large 74mm Bore
• Black Series Finish
• Compatible With OEM Throttle Cable
• CNC-Forged 6061-T6 Billet Aluminum Construction
• Sealed Bearings For Smooth Operation
• Eliminated Water Passages For Cooler Operation
• Integrated Skunk2 Badge

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Skunk2 for more products.

Competition Clutch now offers a 250mm clutch and flywheel upgrade kit for the Subaru WRX/STI. This assembly provides a smooth engagement, light pedal and near stock drivability. The complete clutch and flywheel kit weighs in at 31 lbs. compared to the 38 lb. OE assembly.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Competition Clutch for more products.

Since Hyundai first introduced the Excel to the U.S. auto market in 1986 they have continued to take baby steps, very intelligently feeling things out along the way, never leaping without first knowing where to land. The 1986 Excel was nominated number 10 on Fortune Magazine’s “Best Product” list, in large part because of its price. The Excel produced sticker shock in a reverse direction, leaving some to ponder how Hyundai could offer so much for so little.

Hyundai is based in Seoul, South Korea, and along with Kia, now comprises the Hyundai Kia Automotive Group. Now those baby steps have grown into the world’s fourth largest automaker as of 2009. Now in 2011 it has been the world’s fastest growing automaker for two years running. The intelligent baby steps have paid off, and one such stride was the Genesis Coupe, offering enthusiasts a rear-wheel-drive coupe powered by a turbocharged 2.0L four-cylinder or naturally aspirated 3.8L V6 engine. The Genesis’ performance, coupled with its stylish looks, have opened many enthusiasts’ eyes to Hyundai as a high-performance company.

Owners of 2008 through 2012 Hyundai Genesis Coupes with 2.0L turbo or 3.8L V6, can save money and help their cars breathe easier by simply replacing the existing factory installed air filter with the high performance 28-20958 AEM Dryflow replacement air filter. The Dryflow air filter is a direct replacement for the stock air filter.

AEM’s 28-20958 air filter is washable and reusable and it does not require oil. It can be used for up to 50,000 miles before cleaning is needed depending on driving conditions. The 28-20958 air filter perfectly complements the intelligent design of the Hyundai’s Genesis, and it is a true performance air filter designed to improve horsepower without the inconvenience of oil. AEM OE replacement air filters are backed by AEM’s Lifetime Limited Warranty so the days of buying paper filters over and over are … over.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click AEM for more products.

Little girl’s have always had the dream request of: ‘I want a pony!’.  Well now, their brothers (and dads) have their own plea: ‘I want a Mario Kart!’.

Behold the most amazing team up of fantasy and reality – virtual and actual – video games and cars!

The life size Mario Kart was brought from the screen to the real world with a collaboration between Nintendo and West Coast Customs.  Currently, the Mario ‘Standard Kart’ and Luigi’s ‘Bumble V Kart’ are on display and build ups are slated for a few episodes of the shop’s reality show.

As for when you can get your hands on one?  No info on purchasing yet.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click RPM Superstore for more products.