Drop Engineering has just released a solid racing engine mount kit for the 1984-1995 Ford Mustang. Drop Engineering Ford Mustang Solid Racing Engine Mounts are assembled from 304 Stainless Steel, the industry standard in high quality stainless steel. The solid steel construction delivers the maximum transfer of power to your Mustang’s wheels. All Drop Engineering Ford Mustang Solid Racing Engine Mounts are CNC machined and tig welded for the utmost in precision and durable performance.

When you accelerate, there is a noticeable lag created with stock OEM mounts due to movement of the motor. Mustangs outfitted with Drop Engineering Racing Engine Mounts will see quicker engine response and easier shifting even at a higher RPM. The Ford Mustang Solid Racing Mount Kit includes two mounts.

For more information call “1-800-997-TINT”

P2R now offers the 06+ Civic Si Throttle Body spacer in 70mm. Only available in Red & Black.

Increase horsepower and torque with this 3/4 inch throttle body spacer. Tests on a 06 Civic Si produced a 4.5 horsepower gain at the wheels! Our spacer comes equipped with a 1/8th inch NPT threaded port at the bottom that can be used as an extra vacuum port or nitrous. Includes extended bolts, plug, and is anodized for a brilliant show-quality look.

For more information call “1-800-997-TINT”

The 2009 Acura TSX is a well-built entry-level luxury car that comes standard with leather seats, dual-zone climate control and a USB port music interface. This second-generation TSX is larger than its predecessor and offers more interior space to its passengers. The modernized exterior styling of the 2009 Acura TSX makes it an attractive vehicle. Great handling, performance and recognized reliability are only a few of the reasons consumers continue to rave about the Acura TSX.

K&N designed an air intake system (69-0026TS) for 2009 Acura TSX models with a 2.4 liter engine. The 69-0026TS was engineered specifically to fit the cramped quarters of the TSX engine compartment. By completely replacing the restrictive factory air filter and intake housing of the 2009 Acura TSX with K&N’s custom intake tube and high-flow performance air filter (RC-4630XD), K&N achieved a dramatic increase in horsepower.

Power testing was performed on this air intake system to determine how much horsepower could be obtained with this simple intake modification. The 69-0026TS showed an increase of 7.86 horsepower at 5400 rpm when tested on a 2009 Acura TSX with a 2.4L in-line 4-cylinder engine.

The 69-0026TS intake reduces air restriction, compared to the factory intake, with its large K&N high-flow air filter and its powder coated silver aluminum tube. K&N’s design adds performance while providing outstanding filtration for the life of your Acura TSX. The air filter can go up to 100,000 miles before servicing is required depending on driving conditions. The entire air intake system comes with K&N’s million mile limited warranty.

K&N provides detailed installation instructions that help make installing your 69-0026TS cold air intake system simple. Typical installation takes 90 minutes or less and only uses common hand tools.

For more information call “1-800-997-TINT”

From the street to race circuits, the HKS DCT Cooler Kit for the GT-R has been developed to provide firm, positive shift engagement while assisting in the prevention of overheating the clutch and transmission. By stabilizing and maintaining lower oil temperatures in the transmission, the life cycle of the oil is extended. Integrated with the factory water-cooled transmission cooler, the DCT Cooler Kit also assists in reducing the GTR’s overall water temperature.

Features
•Placement of the DCT cooler core to the front left fender maximizes cooling efficiency.
•The included, specially designed, Fiber Reinforced Polymer (FRP) air duct is used to enhance air flow to the core.
•A larger -10 size oil line reduces resistance and increases flow ensuring proper oil supply.
•The transmission’s stock heat exchanger and HKS thermostat are integrated into the DCT Cooler. With a specially designed oil outlet attachment, stabilizing the oil temperature occurs in a shorter amount of time. Improved shifts are noticeable even after cold starts.
•During testing at Fuji Speedway, the water temperature was reduced by an average of 5°C (41°F) enabling continuous laps at a constant oil temperature of 127°C (260°F).

For more information call “1-800-997-TINT”

Excessive heat can cause major and expensive damage to critical components in a car. Engine bays, radiators, brakes, transmissions, and differentials all need good air flow to help transfer away unwanted heat. APR Air Ducts help bring fresh cooling air to different areas that need additional cooling. Built using pre-preg. carbon fiber reinforced polymer (CFRP) composite materials for superior strength-to-weight ratio, APR Air Ducts add both function and “lightness” where it counts.

The APR Brake Cooling Ducts are aerodynamically-optimized to “funnel in” massive amounts of air. Also known as the venturi effect, when the vehicle speed increases, this funneled-in air increases in both pressure and velocity as it passes from the larger frontal area into the smaller pipe section of the brake duct. When matched with appropriate high-temperature air duct hoses (not included – purchase hoses from your favorite racing-supply shop), the APR Brake Cooling Ducts will help to channel in large volumes of fresh air to help cool down red-hot brake rotors lap after lap on the track.

Features

• Factory-like fitment

This vehicle-specific component is designed to match the contours of the vehicle’s body, for a factory-like fitment.

• Carbon Fiber Construction

This component is formed in the autoclave at high temperatures using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight.

• UV Resistant Coating

Each Air Duct is finished with UV-resistant clear-coat paint for resistance against various environmental conditions (take care of this as you would take care of your vehicle’s paint finish – polish then coat with good-quality wax or synthetic protectant).

• Mounting Hardware Included:

Screws, nuts and bolts are all included to allow you to install the to your vehicle.

For more information call “1-800-997-TINT”

This new Power Rev Racing throttle body adapter will allow you to bolt up a 09+ Acura TL SH-AWD 3.7 throttle body onto your 04-08 Acura TL or 03+ Honda Accord, and also 06+ Honda Civic Si. Why put a 09 Acura TL SH-AWD throttle body on your car? Here are the Sizes

04-08 TL & 03+ Accord Throttle Body Size:
Inlet ID: 67mm
Outlet ID: 65mm

09+ Acura TL SH-AWD Throttle Body Size:
Inlet ID: 80mm
Outlet ID: 70mm

Dyno test on a 04 Honda Accord proved 6hp at the wheels across most of the RPM band. Gains should be slightly higher on a 3.2 TL & even better on the 3.5 TL. This adapter comes silver with a clear anodize for a smooth quality finish. The adapter is also tapered for a smooth flow.

The adapter will also allow you to bolt up the 2010 Acura TL SH-AWD throttle body onto your 2006+ Civic Si. The drive by wire plugs right in and works!

For more information call “1-800-997-TINT”

Progress Technologies have developed a new anti-sway bar set for the new Nissan 370Z and Infiniti G37. The Progress front anti-roll bar is a hefty 35mm x 6mm wall tubular alloy steel and is non-adjustable due to the OEM end-link configuration. This bar replaces the OEM 27mm bar. The Progress rear anti-sway bar is a 25mm x 4mm wall tubular alloy design with three adjustment settings. This replaces the OEM 24mm front bar.

These anti-sway bars are designed for use with the OEM end-links. The complete hardware kit includes low-deflection polyurethane bushings, new frame mount brackets, and a specific formulation of synthetic chassis grease.

This new anti-roll bar system will improve chassis balance, quicken steering response, and minimize the uncomfortable “speed-robbing” body roll while cornering. All Progress anti-sway bars are manufactured in-house, feature precision MIG-welded ends, and are powder coated metallic graphite gray.

For more information call “1-800-997-TINT”

Mishimoto has just released two new additions to their line of universal intercoolers. The Mishimoto S Line Universal Intercooler (31″ x 12″ x 3″) and the Mishimoto R Line Universal Intercooler (31″ x 12″ x 4″) both provide the perfect cooling capacity needed for supercharged and turbocharged engines. Constructed of 6061 aircraft quality aluminum for extreme durability, Mishimoto Universal Intercoolers efficiently reduce induction air temperatures, while significantly improving engine output.

Mishimoto Universal Intercoolers are all precision tig welded during construction to offer an enhanced level of performance and durability. Mishimoto Universal Intercoolers safely increase horsepower while giving that extra boost every driver appreciates.

For more information call “1-800-997-TINT”

Drop Engineering has just added aluminum lug nuts to their line of high performance racing accessories. Drop Engineering Aluminum Racing Lug Nuts are carefully crafted from AL7075. T6 temper 7075 Aluminum is an aircraft quality alloy that boasts an impressive ultimate tensile strength of 74,000 – 78,000 psi (pound per square inch) and minimum yield strength of 63,000 – 69,000 psi. This level of strength guarantees that Drop Engineering Aluminum Racing Lug Nuts will hold up even under the most demanding racing conditions. Drop Engineering forges all of their lug nuts from AL7075 because it guarantees the greatest level of tolerance without any added weight.

Each lug nut is carefully crafted from an extruded aluminum billet. Drop Engineering utilizes CNC machinery to ensure the highest grade of precision quality during production. Stylish and durable, Drop Engineering Aluminum Racing Lug Nuts are an ideal upgrade for track or street drivers. Drop Engineering Aluminum Racing Lug Nuts are designed to function with Drop Engineering Extended Wheel Studs.

For more information call “1-800-997-TINT”

Ralco RZ Performance is now part of the RPMWare Family, based in Farmingdale, New Jersey our products are made using the highest quality material in the industry with state of the art equipment. Ralco RZ is a manufacturer of Aluminum Pulleys, Shifters, Clutches and Flywheels.

Ralco RZ is well known for having quality products at a very low price. We manufacture light weight pulleys and also under driven pulleys in a nice chrome finish. Almost all our shifters come with nice chrome shift knobs. Most of our products will include instructions for belt sizes and installation manuals to help your customers every step of the way.

Ralco RZ inventory is well kept with over 500+ units in stock of many part numbers we have 99% fill rate and are working to improve on a daily basis with new part numbers added monthly. Keep checking back for more great shifter announcements from Ralco RZ! We are also going to launch our new website in the coming weeks stay tuned.

For more information call “1-800-997-TINT”