Ever thought about making your own intake? Turbo Kit? P2R new Mass Air Flow Sensor Flange is made to fit most Honda / Acura MAF sensors. This aluminum flange has a radius to sit perfectly on a 3 inch pipe to make for easy welding.
For more information call “1-800-997-TINT”
Mishimoto has just released a performance radiator designed for the 2001-2003 Mazda Protegé. The lightweight dual core, 100% brazed aluminum Mishimoto radiator is the ideal upgrade to your OEM radiator. Whether your Protegé is daily driven or taken to the track, the Mishimoto radiator will maximize cooling efficiency, boost engine functions and protect your car from overheating. With no modification or cutting required, installation of the Mishimoto 2001-2003 Mazda Protegé aluminum radiator is effortless.
For more information call “1-800-997-TINT”
The 2010 Acura TSX is an impressive entry-level luxury car built with an abundance of standard features. Many Acura TSX owners boast about its quality interior, sporty handling and attractive vehicle design but also mention the lack of power from the 2.4 liter models. All in all, the 2010 Acura TSX, no matter which model you own, is an enjoyable car to drive.
AEM introduced a cold air intake system designed for the 2010 Acura TSX with the 2.4L engine. Specifically designed to boost power and acceleration, the 21-697C uses a mandrel-bent aluminum intake tube engineered to reduce restriction and intake temperature. The intake tube is routed through the fender placing the filter behind the factory fog light on the driver’s side. This allows for an influx of cooler outside air. More than 100 dyno testing runs were made in perfecting this design.
Attached to the custom intake tube is AEM’s oil-free Dryflow air filter designed to produce high air flow with great filtration and performance. This air filter is also washable and reusable.
Dyno-testing on an Acura TSX model with a 2.4L engine demonstrated an increase of 10.2 horsepower at 6600 rpm with the use of AEM’s 21-697C cold air intake. AEM has a link to the dyno test results on the 21-697C air intake product page.
AEM air intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. Installation of the 21-697C cold air intake system in the 2010 Acura TSX 2.4L could not be easier with AEM’s detailed installation instructions.
AEM’s Acura TSX air intake system, is protected by the AEM Air Intake System Warranty Policy. AEM warrants that its air intake systems and Dryflow air filters will last for the life of your vehicle.
For more information call “1-800-997-TINT”
Turning up the boost? Need a new Inlet tube? Factory inlet tube cracked or damaged? Upgrade to the high flow, wire enforced PERRIN Performance Turbo Inlet Tube. The PSP-INT-401BK hose fits WRX & STI 2002 2003 2004 2005 2006 2007 & Forester XT 2004-2008. The PSP-INT-421BK hose fits WRX 2008 2009 2010 & Legacy GT 2005-2009.
TURBO INLET HOSE
Used for years in Aerospace and medical equipment, silicone is now seeing a resurgence as a durable and superior material in performance motorsports. Silicone technology allows us to design a turbo inlet hose that is better in all aspects than the OEM part and increases your engines horsepower.
Smoother Air Flow To Turbo
The PERRIN inlet hose is perfectly smooth on the inside and has a significantly larger internal diameter than the OEM part. The increased air flow by removing the pleats found in the OEM hose makes more horsepower, decreases turbo spool time, and improves acceleration.
SS Internal Support Wire
The PERRIN inlet hose is reinforced with a stainless steel support wire that is embedded within the silicone layers. The support adds rigidity to the hose and prevents collapse when used with restrictive filter elements and large turbo applications running extreme amounts of boost.
Built In Blow Off Valve Connection
The PERRIN inlet hose has a machined aluminum insert which is bonded into the layers of silicone, giving you a solid blow off valve hose connection and makes installation go even easier.
Large High Flow Spigots
All spigots on the PERRIN inlet hose are 1/2″ID for maximum flow from crank case vents and other vacuum connections. All connectors used on our hoses are glass reinforced nylon (rated to 400 degrees F) which will withstand engine bay temps found from normal driving to extreme racing conditions.
Failed OEM Hose Due To Heat
Made from plastic and weak rubber, the Subaru factory inlet hose is susceptible to engine heat and aging which WILL cause cracks and vacuum leaks harming drivability and performance and even engine damage! If yours is 3 years or older, replace it!
Easy To Install
The PERRIN Turbo inlet hose takes under an hour to install and doesn’t require removal of intake manifold, or any additional routing or re-routing of crank case vents. This cuts the install time from down to just 1 hour!
For more information call “1-800-997-TINT”
Skunk2’s completely redesigned, fully adjustable Pro-S II Coilovers for Honda’s ’06-’10 Civic have arrived. Similar to Skunk2’s industry-leading Pro-C Coilovers, Pro-S II Coilovers now feature double-adjustable ride height and a state-of-the-art mono-tube design. Thanks to threaded shock bodies, Pro-S II Coilovers now offer height adjustments independent of spring preload, which results in significant ride-height changes without sacrificing shock travel or ride comfort. Quick and precise ride-height adjustments can now be made for dialing in corner balancing as well as for improved handling, responsiveness, and overall balance. Skunk2’s track- and street-tested Pro-S II shock valving offers the perfect balance between daily driving and track performance and its all-new, shortened shock bodies and reduced shaft strokes help maintain adequate suspension travel on lowered vehicles for improved performance without sacrificing comfort.
Pro-S II Coilovers feature vehicle-specific valving dialed in by Skunk2’s suspension engineers, carefully selected springs designed to dramatically improve handling, and a race-inspired, mono-tube design for superior performance. Skunk2’s micro-polished, mono-tube design, combined with its precision-machined, oversized shafts and pistons, ensure that each Pro-S II Coilover is both responsive and durable. The results are unmatched cornering grip, reduced body roll, and a feel of vehicle control and stability like no other.
Like all Skunk2 Coilovers, its Pro-S II Coilovers feature hard-anodized, CNC-machined, forged 6061-T6 aluminum spring perches and CNC-wound racing springs manufactured from high-quality, SAE9254V spring steel. Each spring is designed to optimize the balance between comfort and performance and is custom-matched to their respective shocks. Pro-S II Coilovers offer ride-height adjustments as low as three inches for an aggressive and sporty appearance.
Just like the entire Pro Series lineup, Pro-S II Coilovers set the benchmark for suspension performance. Similar to how Skunk2’s Pro Series Camshafts and Valvetrain revolutionized Honda engine performance, its fully adjustable, Pro-S II Coilovers do just that for enthusiasts who are looking for high-performance suspension components at an affordable price. Based on more than 15 years of racing and suspension tuning experience, Pro-S II Coilovers feature the same technology Skunk2 uses on its own championship-winning road racing and drag racing cars.
Like all Skunk2 products, Pro-S II Coilovers feature a one-year warranty and are designed to provide years of enjoyment for the life of your vehicle. Never wait for a coilover rebuild again; Skunk2 stocks large quantities of replacement dampers that, in most cases, cost less than a typical coilover rebuild. Purchase your replacement dampers directly from Skunk2 to minimize downtime.
FEATURES
•Mono-Tube Construction
•Shortened Shock Body And Stroke
•Double-Adjustable Ride Height
•One-Piece, Forged Shock Body
•Factory-Set, Precision Valving
•SAE9254V Racing Springs
•High-Quality Shock Oil
•Triple Upper And Lower Seals
•Oversized Pistons And Shafts
•Custom Spring Rates From 8-18kg/mm Available (sold separately; additional charges apply)
For more information call “1-800-997-TINT”
Royal Purple Purple Ice is a high performance, synthetic, radiator coolant additive for both gasoline and diesel engines. It is formulated to reduce the surface tension of the coolant, which improves heat transfer through the cooling system while providing additional protection against rust, corrosion and erosion.
Purple Ice prevents the formation of scale deposits in the radiator for optimum coolant flow and lubricates the seals of the water pump. It is ideal for use in straight water racing applications or in antifreeze / water mixtures.
Purple Ice is compatible with traditional ethylene glycol antifreeze (green) and GM Dex-Cool® antifreeze coolants.
Recommended Treat Rate
•For use with antifreeze — 1 oz. / quart of cooling system capacity
•For straight water applications — 1.5 oz. / quart of cooling system capacity
Note: Minimum of 20 percent antifreeze recommended in street driven vehicles.
For more information call “1-800-997-TINT”
Mishimoto has just released a racing thermostat for the 1990-1997 Mazda Miata. The Mishimoto 1990-1997 Mazda Miata thermostat will promote greater cooling efficiency throughout your engine and significantly lower engine temperature produced by modified and upgraded turbo applications. The Mishimoto racing thermostat opens at a lower temperature than standard thermostats, allowing the coolant to flow through the engine sooner. This reduces and maintains cooler engine temperatures.
Mishimoto guarantees superior performance and quality with an unmatched lifetime warranty on all parts. Check out, Mishimoto for more info on this and other products.
For more information call “1-800-997-TINT”
Advanced Clutch Technology (ACT) is pleased to introduce our new lightweight, SFI Spec. 1.1 Certified, XACT flywheel for the 99-06 Audi TT Fwd, 1990-2004 1.8L Volkswagen Beetle, Corrado, Golf, and Jetta.
These high quality, forged Chrome-moly steel flywheels are CNC-machined and feature an induction hardened integral ring gear for increased durability. ACT flywheels are engineered for strength and precision balanced for smooth operation. Driver and spectator safety are top priority at ACT. Each ACT flywheel is certified to meet SFI Spec 1.1 standards, making them legal for competition where SFI 1.1 certification is required or recommended. XACT flywheels come complete with an official SFI sticker and serial number, as required for certification.
The new XACT StreetLite 600270 flywheel, weighing 14 pounds, provides quicker engine response and acceleration, while being significantly lighter than stock.
For more information call “1-800-997-TINT”
The 2009 BMW M3 is a slick piece of German engineering that is available as a coupe, sedan or a hardtop convertible. Only one trim level is available on the M3 that was created by using a BMW 3 series as its base. Features that come standard on this BMW include alloy wheels with performance tires, leather seats, automatic climate control, cruise control, heated power-adjustable sport seats with driver memory that allows drivers to have their seating position programmed. Another one of the great standard features on the M3 is the impressive multi speaker sound system that is sure to excite all music lovers. In addition all the M3′s receive exterior styling upgrades that make this BMW exciting to drive.
K&N has released two high flow air filter parts, the E-1994 and E-2994, to be used with 2008 thru 2011 BMW M3′s. Part E-1994 was designed for 2008 and 2009 US BMW M3′s and will fit directly into your stock air box. Part E-2994 was designed to be used in the BMW M3 years 2008 Non-US, 2009 Non-US and all 2010, 2011 BMW M3′s.
Both air filters are designed to provide your vehicle with a highly efficient air filtration option. Depth of the pleating has been carefully chosen to ensure your vehicle receives minimal restriction from this air filter while getting outstanding dirt and debris retention capacity which results in long service intervals.
These K&N air filters come pre-oiled and ready to install making this upgrade fast and easy. They can go for up to 50,000 miles before servicing is needed depending on driving conditions. When servicing the air filter does become necessary drivers can purchase the K&N re-charger cleaning kit, 99-5000. This kit comes with spray oil and cleaner. Re-charger kit, 99-5050 comes with squeeze bottle oil and pump spray cleaner. These kits are available at most major automotive parts retailers.
K&N E-1994 air filter fits the following:
•2009 BMW M3 4.0L V8 – US
•2008 BMW M3 4.0L V8 – US
K&N E-2994 air filter fits the following:
•2011 BMW M3 4.0L V8 – All
•2010 BMW M3 4.0L V8 – All
•2009 BMW M3 4.0L V8 – Non-US
•2008 BMW M3 4.0L V8 – Non-US
For more information call “1-800-997-TINT”
New from P2R is the Power Rev Racing Stainless Steel clutch hose. The Stainless Steel hose is made from Teflon lined stainless steel braided hose with a black protective covering. P2R clutch hose replaces the factory rubber section and will give you a better, more firm feel on the pedal, as well as better clutch performance.
For more information call “1-800-997-TINT”