Category Archives: Uncategorized

K&N 2009-10 Dodge Ram 5.7L Hemi Gets More Oomph!

K&N released an air intake with a polished aluminum tube for the 2009-2010 Dodge Ram 1500 V8 5.7L. This intake, part 77-1561KP, has shown a 10.3 horsepower increase @ 4382 RPM when tested on K&N’s dynamometer. This easy performance add-on comes with K&N’s million mile limited warranty.

The appearance of the polished aluminum tube, which is adapted with a 90 degree elbow, will dress up your engine so it is ready for show. This intake includes a heat shield that surrounds the high flow cone shaped air filter for protection against engine heat.

K&N air intakes provide outstanding engine protection and can go up to 50,000 miles before the oversized air filter needs to be serviced. With this simple addition you will get a show truck look with power you can feel. K&N air intakes can typically be installed in 90 minutes or less. Complete installation instructions are available on KNFilters.com.

For more information call “1-800-997-TINT”

HKS fine tune v belt-sized-580×377

HKS Fine Tune V Belts are light weight and uses EPDM (Ethylene Propylene Diene Monomer) Rubber for better durability and performance in hotter and colder conditions with improved friction tolerance.
•Increased durability at high temperatures
•Increased performance in cold weather
•Lightweight with good friction tolerance properties means that excess tension is not required whilst anti sound properties reduces belt squeal.

EPDM (Ethylene Propylene Diene Monomer) Rubber:
•Better durability and performance in hotter and colder conditions with improved friction tolerance.

V Belt color is blue with HKS logo.

Colored nylon fabric is used for better anti color fading properties.

 

For more information call “1-800-997-TINT”

Tanabe New Strut Tower Bar Applications

The Tanabe Strut Tower Bar is arguable one of the least expensive upgrades that can provide a very high degree of benefit that is felt immediately after installing. Often one of the first modifications performed on a vehicle, the strut tower brace improves handling and stability of a vehicle.

The Sustec Tower Bar has been very popular due to its low price and high functionality. By connecting the strut towers, and creating a balance, the shocks are prevented from independently moving and causing small changes in suspension geometry.

With continuing coverage into all the hottest new vehicle, the Tanabe Strut Tower Bar is now available for:
•2010+ Hyundai Genesis Coupe – TTB149F
•2010+ Mazdaspeed 3 – TTB154F
•2010+ Toyota Prius – TTB153F

 

For more information call “1-800-997-TINT”

HKS New Metal Head Gasket Set For R35 GT-R!

HKS_23009-AN010

 

HKS metal head gaskets are engineered to resist severe levels of heat that are generated by high-horsepower and high-boost applications. HKS head gaskets are constructed with multiple layers of steel and coated with a special fluorine rubber to provide exceptional sealing. HKS head gaskets are designed to accommodate standard and certain oversized cylinder bores. The new HKS metal head gaskets for the R35 GT-R are 0.8mm thick, and come with exhaust manifold gaskets.

 

For more information call “1-800-997-TINT”

ACT New Streetlite Flywheel For ’07-’09 350Zs!

Advanced Clutch Technology (ACT) is pleased to introduce our new lightweight, SFI Spec. 1.1 Certified, XACT flywheel for the 9/06-08 Nissan 350z 3.5L V6 (VQ35HR).

This high quality, forged Chrome-moly steel flywheel is CNC-machined and features a induction hardened integral ring gear for increased durability. ACT flywheels are engineered for strength and precision balanced for smooth operation. Driver and spectator safety are top priority at ACT. Each ACT flywheel is certified to meet SFI Spec 1.1 standards, making them legal for competition where SFI 1.1 certification is required or recommended. XACT flywheels come complete with an official SFI sticker and serial number, as required for certification.

The new XACT StreetLite 600590 flywheel, weighing in at 17.1 pounds, provides quicker engine response and acceleration, while being significantly lighter than stock.

 

 

For more information call “1-800-997-TINT”

Cobb Tuning New AccessPORT w/ TCM Support for GT-R!

The COBB Tuning GT-R AccessPORT, the most popular engine management solution amongst R-35 enthusiasts, just got better! Introducing the AccessPORT with transmission control module (TCM) support, the world’s first hand-held ECU and TCM flashing, managing and monitoring assistant, adding a whole new level of transmission control on top of the already impressive engine management capabilities of the original GT-R AccessPORT. COBB Tuning brings the simplicity of the AccessPORT to transmission control module flashing. Now GT-R owners can install maps to enhance launch control and make changes to important transmission settings that enhance drivability and improve performance, all with the simple push of a button!

Just like the original AccessPORT for the Nissan R-35 GT-R, installation is simple. No tools are required. No additional “piggy-back” hardware. No mailing the factory ECU or TCM across the country. No vehicle downtime. No waiting. Not even a computer is required. Just plug the AccessPORT in, flash the ECU and TCM, and enjoy the thrill of increased torque, horsepower and transmission responsiveness.

Installing the AccessPORT on the TCM starts with downloading the OEM TCM ROM for safekeeping, so the TCM can be returned to its stock configuration at any time. Once the OEM TCM ROM is stored, the AccessPORT flashes a new Level 1 map onto the TCM that is based on the Nissan LC2 logic upgrade, but increases launch revs to 3,300RPM and includes more aggressive clutch engagement and throttle curves than stock LC2 logic. The result is a positive launch that gets the GT-R off and running harder than the stock LC2 logic, but with smoother clutch engagement than the previous LC1 logic. Still not enough for you? A simple reflash of the TCM with the Level 2 map will have you experiencing the increased punch from raising the launch revs to 3,750RPM!

The R-35 GT-R transmission is an impressive, but complicated engineering wonder, and sometimes adjustments are in order to get it just right. Excessive clutch drag while stationary will cause the GT-R to want to creep forward at a stoplight, while too little drag will make it feel like an automatic’s torque converter. COBB Tuning has implemented Clutch Touch Point adjustment via the AccessPORT, offering +/-7 levels of adjustment to set clutch drag right where the driver wants it. This is a live adjustment that does not require a TCM reflash, simply select the desired level of the Clutch Touch Point engagement, hit Enter and drive!

The original AccessPORT opens the door to impressive power gains for the GT-R, which can exceed the transmission’s ability to manage that added power, resulting in clutch slip and excessive clutch wear. The AccessPORT with TCM support offers Clutch Capacity adjustment, which controls the hydraulic pressure applied to the clutch plates. Yet another on the fly adjustment without the need for a reflash, simply select Clutch Capacity from the AccessPORT menu to reveal +/-7 levels of adjustment to control clutch clamping force. Higher horsepower GT-R’s can eliminate unwanted clutch slip with a +2 or +3 level of Clutch Capacity. Don’t let all that power go to waste!

Due to the complex nature of the GT-R’s transmission, normal wear and tear can cause jerky shifting and less than ideal drivability. Nissan recommends an annual gearbox optimization routine to recalibrate the transmission. The AccessPORT with TCM support incorporates this Clutch Gear Learning routine and allows the owner to recalibrate at will, without a potentially expensive trip to the dealership. Simply follow the step-by-step instructions via the AccessPORT screen and recalibrate the transmission to eliminate wear related drivability compromises.

Of course, the Nissan GT-R AccessPORT with TCM support comes with all of the power gains and features of the original GT-R AccessPORT. Store multiple maps, live map switching on-the-fly, fast map flashing, factory in-dash display knock indicator, data logger, monitor engine sensors, measure 1/4 mile and 0-60mph times, read and clear DTC codes, even flash a valet map to prevent abuse while out on the town or an antitheft map to prevent engine start. For the ultimate power gains, have your GT-R professionally tuned on a dyno by a tuning expert and extract the maximum horsepower available from your combination of performance enhancing modifications. And should the need ever arise, simply uninstall the AccessPORT and the ECU and TCM are restored to their original condition.

The COBB AccessPORT with TCM support is the ultimate engine and transmission management solution available for the Nissan R-35 GT-R. Access the potential of your Nissan GT-R today!
•Original GT-R AccessPORT owners can upgrade their AP-NIS-005 to AP-NIS-006. Please call1-800-997-TINT for more information and order processing.
•Please note that TCM support is designed for stock GT-R transmissions. It is not recommended for GT-R’s with aftermarket clutch packs and other non-OEM components.

 

For more information call “1-800-997-TINT”

Mishimoto A Cooler Accessory To The Cool 99-02 BMW Z3!

Mishimoto has just unveiled an aluminum radiator designed for the 1999-2002 BMW Z3. The Mishimoto BMW Z3 radiator is the ideal upgrade to the stock radiator. Whether your car is daily driven or taken to the track, your car will be protected from overheating, thanks to improved cooling efficiency.

The overall performance of your engine will be improved by the lightweight dual core Mishimoto radiator made of 100% brazed aluminum. Installation is made easy by a direct drop-in replacement for your stock radiator with no cutting or modification required.

 

For more information call “1-800-997-TINT”

JDM Go Green Engine Dress Up

Honda was and is the original green machine! By utilizing some of the most advanced technologies, Honda was able to achieve more HP per liter than most any other engine manufacturer could dream of. In honor of Hondas unbelievable efficiency, we are offering a limited edition run of GO GREEN engine dress parts!

Each GO GREEN engine dress up kit includes a battery tie down, five fender washers, oil cap, and cam seal. This kit is compatible with B-Series equipped honda vehicles!

 

For more information call “1-800-997-TINT”

AEM 2010 V6 Camaros Get Even Faster With New Intakes!

Nowadays, V6 muscle cars mean business, and the new 2010 V6 Chevy Camaro is no exception. With its direct-injected, DOHC 304HP V6 engine, a choice of 6-speed manual or automatic transmissions, and a sporty independent rear suspension, the new V6 Camaro can out-gun many older V8 models both at the drag strip and at your local road course. With that much power and value straight from the factory, the challenge to create an air intake that would beat the competition would not be easy.

After several months of testing four different prototypes with CFD (Computational Fluid Dynamics) analysis, in-vehicle fuel-trim tests, under hood thermal analysis, and vehicle dyno tests, AEM Induction’s engineers were still not satisfied with the results. While testing a 5th prototype they found it had no advantage over competitor designs. Our conclusion at that point was simple: Compromise is not an option. It was back to the drawing board.

AEM engineers came up with 4 more designs and put them through their usual onslaught of tests. In total, 9 designs with 24 variables were run through dozens of flow tests and over 180 dyno pulls on 6 different vehicles! The ultimate reward came when they finally designed a winner with impressive mid-to-high range power. The results for the new AEM 21-8028DC with a gunmetal gray finish and 21-8028DP with a polished finish were what AEM engineers were looking for in a Cold Air Intake Systems for the 2010 V6 Camaro. Testing revealed a maximum power gain of 16.39 HP @ 5350RPM and 17.57 ft-lbs of torque @ 2600RPM at the rear wheels!

AEM’s new 21-8028DC and 21-8028DP Cold Air Intake Systems for the 2010 V6 Camaro use a bolt-on kit, including a large 2-piece, 3.5-inch diameter mandrel-bent intake tube made from high-grade aluminum. The intake tubes include a venturi insert to contour the air flow at the MAF sensor position, maintaining the factory calibration while allowing a greater volume of air into the engine. The new MAF position reduces heat soaking of the integral IAT sensor, a common issue with the stock intake system, allowing it to read true intake air temperatures instead of hotter surface temperatures. An OEM-quality MAF extension harness is included.

The 21-8028DC and 21-8028DP intake tubes position the large, AEM DryFlow performance air filter in the optimal location for cool air. As a result, the V6 Camaro’s windshield washer fluid reservoir had to be replaced with a smaller, lightweight washer bottle mounted in a new location. An OEM-quality washer pump extension harness and a powder coated mounting bracket are also included. Just bolt it on, plug it in, and GO! AEM provides detailed instruction instructions that make installing this power gaining air intake on your Camaro V6 easy.

The AEM DryFlow air filter has a large surface area and a velocity stack inlet design that outflows the V6 engine’s requirements. The oil-free synthetic DryFlow technology is extremely durable and easy to clean. To further enhance the filtration properties of the DryFlow performance filter, AEM also offers DryFlow Pre-Filters. Designed to prevent splashes of water or mud from saturating the DryFlow air filter, AEM’s pre-filters are manufactured from a durable micro-screen material that is pretreated with a proprietary hydrophobic process.

 

 

For more information call “1-800-997-TINT”

AEM Hyundai Genesis Intercooler Kit

 

Talk about big news the week of SEMA! AEM has just thrown the gauntlet on the intercooler market with this brand new AEM Front Mount Intercooler Kit for the 2010+ Hyundai Genesis Coupe. The Hyundai Genesis Coupe has proven itself as a worthy competitor in the sport compact market with it’s 4b11T derived 2.0L turbo. With it’s already impressive response to modification, the new AEM Front Mount Intercooler Kit is sure to up the ante and take the Hyundai’s performance to the next level.

 

For more information call “1-800-997-TINT”