Koyorad | Koyo is proud to introduce a direct replacement all aluminum performance radiator for the 2009-Current Nissan GT-R. This brand new application features Koyorad’s new 48mm “HH” Series radiator core with an ultra high fin density to maximize heat transfer. Koyo designs and manufactures each radiator with precision; therefore this is a direct-fit performance replacement for the stock OE plastic/aluminum radiator for a quick and simple installation with no modifications. Koyo has also integrated a 1/8” NPT female accessory fitting (supplied with a threaded plug) to accept temperature sensors typically included with aftermarket temperature gauges.

Koyorad quality is a direct result of their privately owned factories which allow Koyorad Japan to oversee each stage of radiator production. This ensures that quality is never sacrificed for quantity. Each Koyo all aluminum radiator core is hand assembled, Nocolok brazed, then TIG welded by hand with the finest aluminum available. These are just a few characteristics that have earned Koyorad Radiators their excellent reputation in performance radiators worldwide.

Features
•Koyorad “HH” Series 48mm Hyper Core
•OE Specific mounting and direct fit
•Mirror polished finish
•Nocolok-R Brazing
•Precise Tube and Fin alignment
•Billet aluminum filler neck
•1/8” NPT female accessory fitting

For more information call “1-800-997-TINT”

Advanced Clutch Technology (ACT) has released a new high performance clutch kit and components for the 2011 Ford Mustang GT 5.0L V8.

ACT’s new clutch kit for the 2011 Ford Mustang GT features a Heavy Duty Pressure Plate that incorporates hardened diaphragm fingers for decreased wear and provides a 35% increase in clamp force over the stock unit.

The ACT Street Clutch Kit combines the Heavy Duty Pressure Plate and a Performance Organic Street Disc, a disc that features special performance organic friction materials to withstand increased heat and abuse, steel backed linings for high burst strength and modifications engineered for quicker shifting. The ACT Street Clutch Kit provides a moderate and consistent pedal feel, smooth engagement, significantly improved durability and increases the torque capacity to 565 ft. lbs.

ACT Race Clutch Kits will hold 724 ft. lbs. of torque. Cerametallic Xtreme Discs are available in 6 pad spring centered and rigid hub designs and are very durable while allowing for quick shifting. The Xtreme Discs are for high power engines and recommended for track use only.

For more information call “1-800-997-TINT”

Hypertech has now added support to the Max Energy Sport power programmer for the 2010-2011 Nissan 370Z and INFINITI G37. Updates are available for existing inventory via the Hypertech Tuner Update Software!

Attachments:
•Updated Application Guide
•Updated Power Gains Chart
•Updated Dyno Chart

Part Numbers & Descriptions:
•62004- MAX ENERGY SPORT- NISSAN •2010-2011 Nissan 370Z 3.7L

•62005- MAX ENERGY SPORT- INFINITI •2010-2011 Infiniti G37 Coupe/Sedan 3.7L

Product Features:
•Max Energy Sport: •Premium Fuel Engine Tuning
•Top speed limiter adjustment: •25- 75 MPH in 5 MPH increments
•81- 155 MPH based on tire speed rating

•Adjust engine rev limiter: Stock to – 500 RPM (in 100 RPM increments)
•Remove 0-60 MPH throttle restriction
•Reads, displays, and clears diagnostic trouble codes (DTCs)

For more information call “1-800-997-TINT”

BlackWorks Racing Washer Bolt Kits are made from Quality billet aluminum. All are laser-etched BWR logo and anodized to perfection. 1 Kit includes 5 Washers and 5 Bolts.

For more information call “1-800-997-TINT”

Advanced Clutch Technology (ACT) is pleased to introduce our new lightweight, SFI Spec. 1.1 Certified, XACT flywheel for the 2011 Ford Mustang GT 5.0L.

This high quality, forged Chrome-moly steel flywheel is CNC-machined and features a induction hardened integral ring gear for increased durability. ACT flywheels are engineered for strength and precision balanced for smooth operation. Driver and spectator safety are top priority at ACT. Each ACT flywheel is certified to meet SFI Spec 1.1 standards, making them legal for competition where SFI 1.1 certification is required or recommended. XACT flywheels come complete with an official SFI sticker and serial number, as required for certification.

The new XACT ProLite 600430 flywheel, weighing in at 14.2 pounds, provides quicker engine response and acceleration, while being significantly lighter than stock.

For more information call “1-800-997-TINT”

KW suspensions announces their stainless steel constructed Variant 3 coilovers for the 2006+ Honda Civic.

The KW coilover suspensions for the 2006+ Honda Civic enables the owner to lower their vehicle 25-65mm on the front axle and 25-60mm on the rear axle and retains enough travel to handle maximum load and dynamic loads during driving. Adjustable (and independent reacting) rebound and compression damping allows a truly individual performance driving setup for those technically demanding drivers. Compression dampening adjustment is conducted in the low-speed range, while the high-speed set-up, so decisive for driving comfort, has been pre-set by KW engineers. All KW coilovers come with a lifetime warranty and pass stringent German TUV safety & quality testing standards. Each kit is TUV approved.

For more information call “1-800-997-TINT”

The all-new SP9015 will catapult you into the lead with up to 6 h/p and 7 ft/lbs of torque! This system offers dual tuning capabilities to correct air/fuel ratios and short/long term fuel trim levels. All systems come with the first surface loading nano-fiber dry filter that catches contaminants on the surface while accelerating airflow. Buy from the company that brought you, The Worlds First Tuned Air Intake System.

Key Features:
•MR Technology – Tunes intakes to factory air/fuel ratios
•Air Fusion – Controls short/long term fuel trim levels
•Web Nano-Fiber Dry Filter – The first webbed nano-fiber dry filter that catches contaminants on the surface and accelerates air flow for added performance
•Machined And Tuned Sensor Adapter
•Calibrated Sensor Housing
•Strategically Located Intake Bracket
•Mandrel-Bent Prime Aluminum Alloy

For more information call “1-800-997-TINT”

Add that last finishing touch to your 2008+ Mitsubishi Lancer Evolution X engine bay with these all new Password:JDM Engine Bay Dress Up Kit! Offered in anodized black, blue, gold, purple, red, gunmetal, silver, and the all new green these fender washers feature the Password:JDM Kenji logo. All Password:JDM fender washers are constructed from aircraft grade aluminum and are matched up with long lasting stainless steel bolts.

The Password:JDM EVO X Engine Bay Dress Up Kit inlucdes a total of 50 washers and stainless steel bolts.

Package Includes:

•32 x Small Washers
•32 x 6M Bolts
•12 x Large Washers
•12 x 8M Bolts
•4 x Nuts & Washers

For more information call “1-800-997-TINT”

Advanced Clutch Technology (ACT) is pleased to introduce its new twin-disc kits for the 2011 Ford Mustang GT equipped with 5.0L V8 engine.

The ACT twin-disc kits offers Mustang enthusiasts a wide range of street-friendly to race-ready kits with torque capacities from 850-1450 lbs/ft of torque. All kits offer two discs which amounts to twice the surface area as compared to a conventional clutch design and results in better wear characteristics, a high heat capacity and long life, and include our proprietary precision ground floater lift system, which allows for adjustment to compensate for wear. Each kit offers a choice of three different clamp load designs for unparalleled performance and moderate pedal effort. Users also have the option of choosing disc combinations that feature high torque capacities along with smooth consistent engagement.

All ACT 2011 Mustang twin-disc kits include a CNC-machined and dynamically balanced flywheel to ensure smooth, trouble free installation and operation.

For more information call “1-800-997-TINT”

Ready to put that crowning jewel on your new motor? Blackworks Racing Oil Caps are the answer. Made from Quality billet aluminum and CNC-Machined to perfection, Blackworks Racing Oil Caps are a direct swap for your OEM oil cap. Currently available in black, blue, silver, red, gold and purple with more to come.

For more information call “1-800-997-TINT”