Gone are the days of bolting on an intake system that just sits there and does nothing while the computer does all the work. AEM’s new 41-1403C Electronically Tuned Intake (ETi) system work’s with the Toyota Corolla’s computer to produce attention getting performance. With a majority of today’s air flow performance add-ons, the vehicle’s computer must adjust and compensate for the changes in air flow; however at times, the computer may be unable to completely adjust. With most modern vehicles, the mass air flow sensor reports the air flow properties to the computer, which in turn makes adjustments to the engine, transmission and fuel system to compensate and to keep things running smoothly. To make sure the computer can compensate for these changes, the air flow must stay within a specific parameter. When the air flow goes outside this parameter, the computer can no longer adjust and in some cases a check engine light comes on. To combat this situation, many intake systems incorporate some sort of air flow modifier that either changes or restricts the air flow at or near the sensor to keep the air flow within the computer’s parameters.

Once again AEM is raising engineering standards with an all new series of innovative air intake systems. With its revolutionary ETI module and fully integrated design AEM has eliminated the need to restrict or stage an intake tube diameter as it crosses the MAF sensor. AEM’s ETI intake system adjusts the sensor electronically to read proper air density instead of using physical tube designs intended to “trick” the MAF reading. This results in an efficient design with large horsepower and torque gains.

AEM decided to engineer an ETI cold air intake system for the 2010 Toyota Corolla with 1.8 liter engine because it is a great selling vehicle that could use some extra power and performance. Sure it is rated to get 34 miles to the gallon on the highway but it could use the extra boost an ETI air intake provides when passing and when the driver needs it.

Designed, tuned and dyno-tested specifically for 2010 Corolla models with a 1.8 liter engine, this easy to install intake comes with a lifetime limited warranty. AEM testing estimates a power gain of 6.9 HP @ 5700 RPM and a torque gain of 7.64 ft-lb tq @ 4400 RPM. See Dyno Chart for details. Actual results will vary depending on the condition of the vehicle, mileage, weather and other variables. Installation is relatively simple and is accomplished using basic tools.

Not only does the 41-1403C ETi intake system add quite a bit of horsepower at the wheels, it is also easy to install as seen in the installation instruction sheet. The 41-1403C ETi air intake system has a durable gun metal gray powder coated finish and it comes with an AEM Dryflow air filter that is washable and reusable. AEM Dryflow air filters offer great filtration with little restriction and they don’t require oil. For wetter climates AEM also offers a water resistant filter wrap, part 1-4000, to help resist splashes of water.

For more information call “1-800-997-TINT”

Made of heat tempered 7075 Aluminum using domestic materials certified for aerospace use. The Password:JDM Aluminum Lug Nuts are crafted in house here in the USA and we had to develop an exclusive matte anodized process just to give these something special… Here at PWJDM we make cool ass products!

The cheap junk products you can buy from everyone else… They probably make their low quality products in China, WE DON’T! That’s the difference when you go PWJDM! They’ve got their prerogatives to make their stuff cheap… we got ours, and that’s to make them way better than what’s currently out there! Get a set of 16 shipped to your door!

Features:
•Heat tempered 7075 Aluminum
•Made in the USA
•Knurled ends for quick finger threading
•Available in your choice of 8 colors
•Password:JDM exclusive Matte Anodized finish!

For more information call “1-800-997-TINT”

The K-Tuned Ram Air Intake is the best K-swap intake in the industry. If you want maximum power output, look no further.

This race inspired, aggressive looking intake design fits all EG, EK (EKK2 mounts only) and DC2 chassis when using our K-Tuned Passenger Side Radiator and RBC or RRC intake manifold. However, it can also be made to fit with the factory PRB / PRC manifold. Intake pipe diameter and length is critical, so we dyno tuned this system for optimal HP gains.

The piping is constructed with 3” diameter mandrel bent aluminum tubing that fits perfectly in the engine bay just in front of the transmission case.  On the other end, the front mounted velocity stack air filter combo sits directly behind the front bumper grille to ensure that plenty of cold air is available.

For track days you can choose to remove the air filter for maximum air flow.  An open V-stack has been shown to offer a slight increase mph on drag race applications.  The system includes our K-Tuned Velocity Coupler, 3” straight coupler, V-stack air filter combo and clamps.

Available in polished aluminum or wrinkle black finish.

For more information call “1-800-997-TINT”

Eibach PRO-KIT is the perfect answer for most frequently-driven street cars. It’s our legendary spring system that dramatically improves both a vehicle’s performance and appearance.

PRO-KIT lowers your Nissan’s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach PRO-KIT is the finishing touch to a winning recipe for performance. PRO-KIT also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Pro-Kit #63103.140
•High Performance Handling and Aggressive Good Looks
•Lower Center of Gravity — Lowers Nismo 370Z 1.0″ Front and 0.5″ Rear
•Stop Quicker, Corner Faster and get Better MPG
•Excellent Ride Quality
•Million Mile Warranty

Every Eibach PRO-KIT is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, PRO-KIT provides the ultimate balance to take your passion for driving to a whole new level.

For more information call “1-800-997-TINT”

HKS has introduced a new line of coilovers, the Hipermax M1 for the 2008-2010 Lexus IS F! This new line of coilovers was designed and tuned for luxury performance, and features separate ride height and 30-way damping adjustability.

For more information call “1-800-997-TINT”

Unleash the full potential of your 6.2L V8! Discover an INJENIOUS way to produce massive power gains of up to 18 h/p and 17 ft/lbs of torque with the all new PF7016. In addition to its patented tuning process, this system comes with a Web nano-fiber dry filter that stops contaminants on the surface while accelerating air-flow into a massive 4″ intake tract. Protect your engine from harsh and dirty environments with the Web nano-fiber dry media as designed for the US Army Abrams M1 tanks. Trust the company that started the air intake revolution.

Key Features:
•MR Technology – Tunes intakes to factory air/fuel ratios
•Web Nano-Fiber Dry Filter – Reusable – The nano-fiber webbing catches contaminants on the surface and accelerates air flow
•Enclosed Air Box With Vented Filter Lid
•Machined And Tuned Sensor Adapter
•Calibrated Sensor Housing

For more information call “1-800-997-TINT”

The all new Moroso air oil separator for the 06-10 Jeep Grand Cherokee SRT8 features:
•Plumbed into a vehicle’s PCV system to capture the excess crankcase vapors and the residual oil mist from reentering the intake track
•Vehicles from the factory vent these excess crankcase vapors and residual oil right back into the intake manifold which could cause detonation and oil deposits to form in the intake track including the valves themselves
•Billet Aluminum body compliments any engine compartment and can be polished, chromed or powder coated for a custom look
•Includes 3/8″ 90º inlet & outlet fittings, 60″ of 3/8″ rubber hose for plumbing the Air-Oil Separator inline, a billet aluminum mounting clamp for the body of the Separator and a mounting bracket
•Features a bottom drain with elbow that makes draining the collected oil virtually mess-free

For more information call “1-800-997-TINT”

Subaru Impreza WRX/STI owners rejoice! P2R brings you our renowned thermal intake manifold gasket!

P2R Power Rev intake gaskets will help reduce intake air temps by removing the direct connection of the intake manifold to the cylinder head. By placing this thermal gasket in between the intake manifold and the cylinder head. You will help reduce the amount of head soak the intake manifold normally absorbs from the cylinder head. Come as a Pair.

For more information call “1-800-997-TINT”

Talk about beauty. HKS has just introduced a brand new line of exhaust for a more discerning client – the SSM Exhaust System. And what would be a more appropriate vehicles for the top of performance and luxury, well how about the 2008-2010 Lexus IS F.

SUS304 Stainless Steel, multiple high quality mufflers and HKS’s commitment to quality all bring this piece to life in a package fit for the highest echelon of luxury.

For more information call “1-800-997-TINT”

AEM Dryflow™ air filters provide high air flow and protect your engine from harmful particles for the life of your vehicle. When they get dirty cleaning is a breeze with AEM’s recommended cleaner specifically formulated for synthetic air filter media. AEM worked in partnership with K&N Filters to develop improved versions of Dryflow™ Air Filter technology and has continued to work with K&N engineers to develop a specially formulated air filter cleaner, part number 99-0624.

To simplify the cleaning process, AEM Dryflow™ Air Filters do not require the use of oil. This means servicing your AEM Dryflow™ Air Filter is easy and quick. The simple four-step synthetic air filter cleaning instructions can be found on the back of the bottle or on the Dryflow air filter cleaning page.

Part number 99-0624 i is a 32-ounce bottle of synthetic air filter cleaner. It includes a trigger spray nozzle to help simplify application of the cleaning solution. As with most household and automotive cleaning products, care should be taken when using the Synthetic Air Filter Cleaner. AEM recommends wearing gloves and proper eyewear when servicing your air filter.

This specially formulated cleaner, 99-0624, is recommended when servicing AEM Dryflow™ or Brute Force™ Air Filters and will help maintain peak performance from your air filter. It will also ensure that your AEM lifetime limited warranty remains in effect.

For more information call “1-800-997-TINT”