By unveiling of a new sport hybrid coupe for the North American market, Honda blurred the lines between performance and environmental responsibility with the all-new 2011 Honda CR-Z. Complete with a 1.5L i-VTEC engine and Integrated Motor Assist (IMA) hybrid-electric system, this uniquely designed hybrid is geared for the driver looking for a way to both protect the environment and have a little fun on the road.

K&N shares these same ideals by offering washable and reusable high flow air filters and intake systems that cut down on disposable filter waste while adding power and performance. The new 69-1018TS Typhoon Air Intake System does just that for the 2011 Honda CR-Z. The 69-1018TS intake comes complete with a free-flowing mandrel-bent aluminum tube and oversized high flow X-Stream top air filter, all in a ready to install bolt-on system for your CR-Z.

“The 2011 Honda CR-Z is a new vehicle platform and required new development of major kit components,” says K&N Performance Kit Manager Bert Heck. “A new intake tube was developed for the 69-1018TS utilizing a reduced volume area in the mass air sensor location to retain factory drivability while increasing horsepower.” Heck also reported the development of a new heat shield and mounting brackets to protect the air filter from direct-radiated heat and to provide a durable mounting location for the intake tube and air filter assembly. Heck and the K&N intake development team utilized the factory lower fresh air duct and airbox mounting locations. Over 160 dyno runs and many miles of on-road testing went into the development of the 69-1018TS to verify the great performance differences that this intake kit can make. The estimated power gain of the 69-1018TS when installed on a 2011 Honda CR-Z with a 1.5 liter engine is 4.7 horsepower at 5049 rpm.

This single upgrade to the 69-1018TS replaces the factory airbox and is guaranteed to add horsepower and torque to your CR-Z, while providing easier airflow and excellent filtration to protect your engine. The 69-1018TS is equipped with a K&N X-Stream top air filter, part RX-4950, which is designed with K&N’s multi-layered oiled cotton gauze media and will only require servicing up to every 50,000 miles depending on driving conditions. The 69-1018TS is also backed with an industry leading 1,000,000 mile limited lifetime warranty for peace of mind, while you and your CR-Z are protecting the environment from waste and boredom.

For more information call “1-800-997-TINT”

The power packed punch generated from the all-new IS1320 will grab you by the seat of your pants with gains of up to 7.2 h/p and 6.5 ft/lbs of torque. Designed and tuned for the Kia Forte, Injen makes this simple bolt-on a must for that weekend getaway to the race track! As an added value, your engine will benefit from the cleaning efficiency of the first “surface loading” web nano-fiber dry filter: the media that catches contaminants on the surface while accelerating airflow for more POWER!

Key Features:
•MR Technology – tunes intake to factory air/fuel ratios
•Air Fusion – adjusts short/long term fuel trim
•Web Nano-Fiber Dry Filter
•Heavy Duty Silicone Elbow
•Mandrel Bent Aluminum Intake

For more information call “1-800-997-TINT”

aFe is proud to announce the Release of a new Magnum FORCE Stage 2 Air Intake System for the 2010-2011 Dodge RAM 2500/3500 L6-6.7L (td). This system is available with a Pro DRY S filter (P/N: 51-12032), Pro 5R filter (P/N: 54-12032), Pro GUARD 7 filter (P/N: 75-12032), or a Value Pack (75-12032-0V). The Value Pack includes a Pro GUARD 7 Filter, Pro DRY S Filter, Restore Kit and Pre-Filter.

For more information call “1-800-997-TINT”

GTSPEC is proud to present our new S-Wave Rear Adjustable Toe Arms for 08+ Subaru Impreza WRX/STi!

For more information call “1-800-997-TINT”

The all new Blackworks Racing Liquid-filled Fuel Pressure Gauge accurately measures the engine’s fuel pressure. This Liquid-filled Fuel Pressure Gauge is Vital to help monitor consistent fuel at all times. These gauges are good from 0 PSI to 100 PSI.

For more information call “1-800-997-TINT”

CUSCO USA presents chassis stiffening components for the 2006~2011 Honda Civic Si & Type R. (FD1, FD2)

Standard vehicles such as the Honda Civic are designed for regular consumers and are not designed to be driven aggressively around a race track. As the engine output and suspension geometry begins to change, the chassis tends to absorb the stress, becoming weak and prone to flex over time. The CUSCO Powerbrace series are strategically placed to minimize this flex, maintaining proper alignment of the suspensions structural design; especially during heavy stress loads.

For more information call “1-800-997-TINT”

Eibach PRO-KIT is the perfect answer for most frequently-driven street cars. It’s our legendary spring system that dramatically improves both a vehicle’s performance and appearance.

PRO-KIT lowers your Impreza’s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach PRO-KIT is the finishing touch to a winning recipe for performance. PRO-KIT also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Pro-Kit #7721.140
•High Performance Handling and Aggressive Good Looks
•Lower Center of Gravity — Lowers Impreza 0.8″ Front and 0.8″ Rear
•Stop Quicker, Corner Faster and get Better MPG
•Excellent Ride Quality
•Million Mile Warranty

Every Eibach PRO-KIT is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, PRO-KIT provides the ultimate balance to take your passion for driving to a whole new level.

For more information call “1-800-997-TINT”

Lane’s Car Products based in St. Louis MO, will turn amateurs into pros. Unlike other companies offering car care products that can be purchased at the retail store level, Lane’s is used by car fanatics and auto detailers.  So, what makes Lane’s different?  We are the detailing experts!  Our parent company, Fast Lane Mobile Wash & Detail, provides auto detailing services for car dealerships and retail customers on a daily basis. Give your customers the opportunity to save time and achieve professional results by adding Lane’s Car Products to your website.

 
Lane’s Headlight Lens Restoration Cleaner

Fog, haze, oxidation.  Whatever you call it, you know it when you see it; ugly headlights that aren’t producing the light output they should. But thanks to Lane’s Headlight Lens Restoration Cleaner, you now have a weapon against these foggy, yellowing, cloudy headlights!  Lane’s Headlight Lens Restoration Cleaner is a unique three-step process  that requires no tools, no need to remove the headlights and restores headlights to like new condition guaranteed.
Lane’s Top Edition Wax Package

Extend the shine and luster of your paint job, with Lane’s Professional Car Wax and Paint Sealant Kit. The kit is a specially designed series of car washing, car waxing and paint sealing that reduces scratches, swirl marks, and protects the life of your paint job. This tried and tesed process starts with Lane’s Wash & Shine, this unique soap wax removes dirt and grime, without leaving those annoying streaks. It is a self-drying wash that lays the foundation for the next step; Lane’s Super Cut. Super Cut is the first layer wax protection, which sinks into any scratches or pock marks to ensure a smooth finishing coat. Follow with Lane’s Gold Edition, a superior finishing wax that gives a glossy shine to the protective foundation.  Complete the series with our original Super Seal Paint Sealant.  This final clear coat finish is a self-drying, defensive layer that seals in the shine and protects your paint job.
Lane’s Leather Care Kit.

Lane’s Leather Care Kit will soften, clean and restore all leather surfaces removing dirt, oil and grime, safely and effectively. Lane’s combines the best auto leather care products in one easy to use  kit. Lane’s Leather Care Kit starts withLane’s Leather Cleaner. This cleaner will clean and soften your leather surfaces. Next, apply Lane’s Liquid Leather Conditioner which is a rich, creamy conditioner and preservative that is fortified with natural moisturizers which helps restore and conserve automotive leather interiors. For the finishing touch to this package, Lane’s Leather Scent is the answer to restoring the leather smell to your new or used automobile interior.

For more information call “1-800-997-TINT”

Mishimoto has just released an aluminum radiator designed for the 1979-1993 Ford Mustangs with automatic transmissions. The Mishimoto performance aluminum radiator for the Ford Mustang is the ideal upgrade to the OEM radiator. Cooling capacity is increased by up to 30% due to a larger core to help protect your daily driver or track car from overheating. The Mishimoto Ford Mustang radiator is constructed using a lightweight two row core made of 100% brazed aluminum and TIG welded polished end tanks. Due to a design that retains OEM fitment, no cutting or additional modifications will be required during installation.

Mishimoto guarantees superior performance and quality with an unmatched lifetime warranty on all parts.

For more information call “1-800-997-TINT”

Centerforce strives to provide top of the line products on today’s market for all performance levels. To do so, Centerforce uses patented processes and constantly tests different materials and designs to find the best combination.

The DYAD DS Multi-Disc Clutches by Centerforce, the next level in high-performance, is now available for all Chevy/GMC 168 tooth V-8 engines with a 26 spline disc, excluding 400” with 2pcs rear main. The DYAD DS part number: 04614820 (Pressure Plate, Disc Set, Floater, Lightweight Steel Flywheel, and Hardware). This new Multi-Disc clutch system replaces the current pressure plate, disc, and flywheel assembly with a higher holding capacity system, designed for a direct bolt in replacement.

The DYAD DS (Drive System) multi-disc clutch design has been developed to meet the needs of modern high-end vehicles. Today’s technology has allowed for engine torque to exceed unprecedented levels and still be driven every day. Drivers need a clutch that can offer; smooth engagement, quiet operation, light pedal, and high-end holding capacity. The DYAD DS offers that and more!
•- PATENT PENDING –
•FULLY DAMPENED CLUTCH SYSTEM DEVELOPED FOR VEHICLES WITH EXTREME POWER LEVELS
•NEW MULTI DISC FLOATING DISC AND DRIVE DISC DESIGN
•SMOOTH ENGAGEMENT AND LIGHT PEDAL EFFORT
•QUIET OPERATION
•HIGH TORQUE CAPACITY UP TO 1300 FT/LBS AT THE FLYWHEEL
•GREATER LONGEVITY
•ARP FASTENERS
•EXCELLENT DRIVER CONTROL
•SPECIFICATION CARD INCLUDED!

For more information call “1-800-997-TINT”