Torque Solution introduces the new Billet Engine Mounts for all 2010+ V8 Camaros! All Torque Solution engine mounts are made with both quality and performance in mind. These mounts are a direct replacement for the OEM factory mounts. OEM mounts are made of sub-par material with rubber bushings that are infamous for deteriorating, cracking, and tearing over time. Heavy racing or spirited driving tends to speed up that process. Torque Solution has you have covered! Our mounts are made out of high grade 6061 billet aluminum material for weight savings and polyurethane bushings for long life and consistent performance. This combination allows the wasted energy to be transferred to the wheels where its needed for optimal performance.

Features:
•Eliminates wheel hop / traction loss
•Improved 60fts / e.t’s
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 7sec e.t. torture tested
•Black anodized
•85A durometer bushings ( Not Solid )
•LifeTime Warranty
•Made in USA

For more information call “1-800-997-TINT”

Moroso is proud to present the all new Honda/Acura K-Series Oil Pan!

Key Features:
•Designed to be used with the Acura RSX oil pump assembly
•Oil Pan has a thick steel rail with a sump that is 5.5″ deep, 16.75″ long and 9″ wide
•Features a race proven trap door assembly and anti-slosh baffle that keeps oil contained in oil pump pickup area during road racing and drag racing
•Extra capacity: holds two more quarts than stock
•1/2″ NPT fitting for supercharger or turbo drain back
•1/2″ NPT fitting for oil temperature sender
•Magnetic drain plug

For more information call “1-800-997-TINT”

Magnaflow is proud to present the newest additions to our line up of Catback Exhaust:
•15487 – an axle-back exhaust for the 2011-2012 Scion tC
•15556 – a catback exhaust for the 2010-2012 Mazda 3 w/ the 2.0L/2.5L engine

For more information call “1-800-997-TINT”

BlackWorks Racing (BWR) Race Breather Box Kit is designed to replace the factory PCV system and vent to atmosphere. Our cans are CAD designed and CNC Press Punched using the latest state of the art technology. The -10 Plugs are welded from the inside to top off that ultra clean look. This kit includes all fittings, plugs, clamps, hose and catch can, Ideal for all turbo setups. (Note this kit is designed to mount in the factory battery tray for a simple clean install on vehicles 92-00 Civic and 94-01 Integra).

Kit Includes:
•1x AL6061 CNC Press Punched Catch Can
•2x K&N Filters
•6x Black -10AN Straight Fittings
•2x Black -10AN 45 Degree Fittings
•2x Block Plugs (CNC M28 to -10 Adapter)
•-10AN Black Braided Lines (10 Feet)
•1x Black BWR Billet Battery Tie Down
•Includes 2 -10 Weld On Fittings for your valve cover ventilation lines
•Lifetime Warranty
•Made In The USA!

For more information call “1-800-997-TINT”

Ford introduced an all-new retro-styled equivalent to the early muscle car trend with their modern, but old-school, Mustang Shelby GT500. Mustang Shelby GT500 models are an exciting car to drive and their powerful V8 really moves. This high-performance variant of the standard Mustang seats four and is available in coupe and convertible body styles.

The 2010, 2011 and 2012 Ford Mustang Shelby GT500 models continue the retro styling while bumping up the horsepower to 540 for 2010 models and a whopping 550 hp for their 2011 and 2012 models. Ford also made some adjustments to the stability to help it grip the road around a corner.

This Ford Mustang Shelby GT500 delivers a comfortable ride and features aggressive styling, athletic handling and powerful brakes, making it one of the most desirable performance level vehicles on the market.

K&N’s 63-2579 air intake system was design for 2010 through 2012 Ford Mustang Shelby GT500 models with the 5.4 liter engine. K&N air intake systems are guaranteed to increase horsepower and acceleration. K&N dyno tests showed an estimated increase of 30 horsepower at 5200 rpm with the use of this intake system.

K&N was able to obtain this massive increase in horsepower by removing the restrictive factory air intake and replacing it with a custom designed non-metallic rotationally molded intake tube and attaching it to K&N’s lifetime high-flow cone air filter, part RF-1044. K&N’s RF-1044 air filter is washable and reusable and only requires servicing every 100,000 miles depending on driving conditions. It allows high air flow while providing outstanding filtration.

A heat shield is provided with K&N’s 63-2579 air intake. It helps bring in cooler air by separating or shielding the air filter from the hot air surrounding the engine. The heat shield also has an opening that allows connection to the OEM fresh air duct.

Installation of K&N 63-2579 on your 2010 to 2012 Ford Mustang Shelby GT500 5.4L is very simple. K&N provides detailed installation instructions that make the process a breeze.

The 63-2579 air intake is backed by the famous K&N Million Mile Limited Warranty and it will last for the life of your vehicle. Adding enormous power to the already powerful Ford Mustang Shelby GT500 has never been easier.

For more information call “1-800-997-TINT”

Skunk2 Valve Cover Washer and Lower Control Arm Washer Kits are coming soon. Dress up your B-series or K-series valve cover or Skunk2 Rear Lower Control Arms with Skunk2′s all-new, billet aluminum, colored washers, available in six unique, hard-anodized finishes, including silver, black, blue, red, gold, and purple. Pricing and availability coming soon…

For more information call “1-800-997-TINT”

CUSCO introduces the Carbon Collection line of merchandise for the individual who seeks a simple, yet classy look on items used for business and pleasure. Real Carbon Fiber is utilized in the design and production.

For more information call “1-800-997-TINT”

aFe is proud to announce the release of the 07-11 Jeep Wrangler JK V6-3.8L MACH Force XP Exhaust Systems in 2.5″. The new exhaust systems are available in 3 different configurations:
•2.5″ System w/ Muffler + Polished Tip + Resonator. Only fitting the 4 Door (P/N:49-46206)
•2.5″ System w/ Muffler + Hi-Tuck Tail Pipe. Only fitting the 4 Door (P/N: 49-46207)
•2.5″ System w/ Muffler + Hi-Tuck Tail Pipe. Only fitting the 2 Door (P/N: 49-46208)

For more information call “1-800-997-TINT”

Here by popular demand, the all-new PF9014 is specifically engineered for the F-150 5.4L V8. This Power Flow air intake system will get your adrenaline flowing with its massive 12.81HP and 18.08 ft/lbs of torque. Originally developed for the US Army Abrams M1 tanks, Injen now offers the first surface loading filter in every kit: this web nano-fiber dry filter will aid in protecting your engine from harsh and dirty environments, extending the life of your motor. Injen Technology the leader in performance!

Key Features:

•MR Technology – tunes intake to factory air/fuel ratios
•Air Fusion – adjusts short/long term fuel trim levels
•Ultra-Flow, Web Nano-Fiber Dry Filter
•Machined And Tuned Sensor Adapter
•Calibrated Sensor Housing

For more information call “1-800-997-TINT”

For the ultimate in tunable suspension performance, Eibach has developed MULTI-PRO-R2 COIL-OVERS, specially tuned spring/damper units that allow you to extract the last ounce of cornering power from your late model performance car. The Coil-Over design lets you precisely tune the corner weights for optimum handling balance, and the wide range of the damping adjustability lets you tune for comfort, ultimate grip, or anything in between.

These suspension kits are perfect for the club racers or drivers who demand the high performance handling and optimal ride quality for which Eibach is famous.

MULTI-PRO-R2 #35125.713
•Double Adjustable Rebound and Compression Damping with Remote Reservoirs
•Easy Ride-Height/Corner Weight Adjustability
•Monotube Design for Maximum Street and Track Performance
•Spring Rates can be Tuned with a Wide Range of Eibach Motorsport ERS Springs (available separately)
•Precise Spherical Upper Bushing Mounts
•Stainless-Steel/Teflon Braided Reservoir Lines
•Legendary Eibach Suspension Quality and Tuning
•100% Designed and Built at Eibach U.S.A
•One-Year Warranty

For more information call “1-800-997-TINT”