Blackworks Racing now offers Brake and Clutch reservoir covers so you can add that last and final touch to your engine bay. Made from a high quality fabric with embroidered BWR logo. By using these it will help prevent spillage of vital fluids, with addition will help prevent dust and debris from accumulating on the tanks. Each reservoir cover is sold separately.
For more information call “1-800-997-TINT”
Magnaflow has gone and created the perfect compliments to aftermarket rear fascias begging for center exit exhausts. The new 2011 Chevrolet Camaro Dual, Center Exit Competition Exhaust is offered in both 2.5inch and massive 3-inch piping part # 15084 configurations. Both versions finish the look with Magnaflow’s signature 4-inch tips.
Currently, Magnaflow has confirmed fitment with two rear fascias; the Unrestricted Motorsports ‘Comp Series’ and the Street Scene Rear Valance (pictured), but more fitments may be possible.
For more information call “1-800-997-TINT”
The evolution of the Ford F-150 pickup is quite impressive. Since its inception in 1975, this American made heavy half-ton truck has been completely reinvented, time and time again, to suit the ever changing needs of the consumer. The 2011 Ford F-150 pickup with 5.0 liter engine comprises three and a half decades of fine tuning and conveys an abundance of quality, design and ingenuity.
With features like exceptional handling, a 360 horsepower V8 engine, a smooth and quiet ride, great turning radius and solid towing capabilities, the 2011 Ford F-150 pickup is by far one of the most useful trucks on the market.
K&N released an air intake system (77-2581KP) that unlocks the horsepower and torque the restrictive factory air box and filter system took away. K&N 77-2581KP is guaranteed to increase horsepower by completely replacing the stock air filter and top portion of the airbox with K&N’s free-flowing mandrel-bent intake tube and high-flow air filter. Dyno testing was performed on the 77-2581KP, and revealed an estimated gain just under 10 horsepower at 5508 rpm when installed on 2011 Ford F-150 models with the 5.0 liter engine.
The 77-2581KP is equipped with air filter part RC-5173, which is washable and reusable. This performance air filter can go for up to 100,000 miles before it needs servicing depending on driving conditions. It allows high air flow while providing outstanding filtration. In order to provide cooler air to the engine the RC-5173 is isolated from much of the engine heat by a custom designed heat shield. It is placed on top of the OE inlet in the lower airbox assembly so it can direct cooler outside air into the air filter.
Owners of the 2011 Ford F-150 5.0L can feel confident in their 77-2581KP performance air intake, because it is backed by the famous K&N Million Mile Limited Warranty.
For more information call “1-800-997-TINT”
Skunk2 is proud to introduce the most unique, low-profile dress-up hardware you’ve ever seen. An original design,Skunk2’s Low Profile Valve Cover Hardware kits are the only ones designed specifically for B-series valve covers.
Low Profile Valve Cover Hardware kits are a comprehensive design, featuring specially engineered “standoffs” that include provisions for Skunk2’s unique, low-profile washers and flush-mounted, stainless steel hardware. Each kit includes 12 low-profile washers and 12 flush-mounted, stainless steel bolts. All kits are compatible with OEM valve covers as well as OEM and most aftermarket spark plug wire covers, including those from Skunk2.
Each OEM-grade standoff replaces the factory mounting studs, allowing for the camshaft caps to be secured to factory specifications. NO OTHER valve cover kit available offers such a solution. A series of Viton O-rings and the appropriate extensions are included with each kit to ensure a leak-free seal and OEM fit and finish.
Only Skunk2’s 40-piece Low Profile Valve Cover Hardware kits include washers and standoffs for all eight mounting points as well as for fastening most spark plug wire covers into place. And only Skunk2 offers the lowest profile washers and bolts around.
Skunk2’s Low Profile Valve Cover Hardware kits are manufactured from 6061-T6 aluminum and are available for B-series VTEC engines in black, blue, gold, purple, red, and clear hard-anodized finishes, and feature Skunk2’s classic, laser-etched logo.
For more information call “1-800-997-TINT”
aFe is proud to announce the release of the OE Replacement filter fitting the 2006-2011 Honda Civic L4-1.8L. The filter is available in Pro 5 R (P/N: 30-10130) and Pro DRY S (P/N: 31-10130).
For more information call “1-800-997-TINT”
For the ultimate in tunable suspension performance, Eibach has developed MULTI-PRO-R2 Coil-Overs for the Honda Civic, Del Sol and Acura Integra. These coil-overs are specially tuned spring/damper units that allow you to extract the last ounce of cornering power from your Honda/Acura. The Coil-Over design lets you precisely tune the corner weights for optimum handling balance, and the wide range of the damping adjustability lets you tune for comfort, ultimate grip, or anything in between.
These suspension kits are perfect for the club racers or drivers who demand the high performance handling and optimal ride quality for which Eibach is famous.
Features
•Double Adjustable Rebound and Compression Damping with Remote Reservoirs
•Easy Ride-Height/Corner Weight Adjustability
•Monotube Design for Maximum Street and Track Performance
•Spring Rates can be Tuned with a Wide Range of Eibach Motorsport ERS Springs (available separately)
•Precision Aluminum Upper Mounts
•Stainless-Steel/Teflon Braided Reservoir Lines
•Legendary Eibach Suspension Quality and Tuning
•100% Designed and Built at Eibach U.S.A
•One-Year Warranty
For more information call “1-800-997-TINT”
The 2011 Scion tC is touted as ‘Lightning in a Bottle, In a Car’. Injen turns the voltage up on the 2011 Scion tC with it’s new SP Series Cold Air Intake System. Tap into your 2.5L with Injen MR Technology which tunes your newly increased air intake to factory Air/Fuel Ratios.
The best part? Convert your Cold Air Intake into a Short Ram with Injen’s patented Air Fusion technology.
For more information call “1-800-997-TINT”
Torque Solution continues to push the limits of high performance aftermarket products with our ‘NEW’ Positive Shift Kit. Developed to perform under the most extreme conditions, our Urethane Components bridge the gap between ordinary rubber and cheap plastics used in current aftermarket shifter bushings by offering a unique urethane specifically chosen by Torque Solution engineers to ensure product performance and reliability while drastically reducing shifter end play allowing for crisper, more precise shifts. All this makes it easy for us to stand behind our shifter bushings with a lifetime warranty.
Features:
•Improved 60fts / e.t’s
•Installs in under 30 Minutes in your garage
•Eliminates excessive Shifter play
•Solid feeling gear change
•Street and track torture tested
•95A durometer polyurethane
•Lifetime Warranty
•Made in USA
For more information call “1-800-997-TINT”
For high-powered applications, EXEDY offers twin and triple Multi-Plate Clutches. These are designed for high power street action as well as drag, road and rally racing, and the newest addition to our line up is the SD Type Twin Metallic Clutch for the 2010 Hyundai Genesis Coupe 2.0T.
All of our multi-plate clutches come with a lightweight, chromoly steel flywheel and the famous purple anodized forged aluminum clutch cover. Depending on the application, we have both strap drive and lug drive models. All have T5001 cerametallic friction materials for extreme heat resistance.
SD Type – This model has been developed for high powered street cars and race cars. They feature ventilated, thick intermediate plates for improved life and spring damper discs to protect your transmission and drive line.
For more information call “1-800-997-TINT”
Minimize chassis flex and maximize control on your 2010+ Mazda 3 with the new GTSPEC Rear Subframe Reinforcement Panel Brace!
For more information call “1-800-997-TINT”