Love your Mazdaspeed 3 or Mazdaspeed 6 except for the shifter? No problem, Torque Solution‘s got you covered!

Torque Solution Counter Shift Weight was designed to rid your Mazdaspeed of that heavy oem counter weight. By reducing the weight by more than 75% this will give your shifter a direct feel. This also allows for more engine bay room for aftermarket intercoolers that have fitment issues with the stock oversized weight. Our system will give you a more positive and direct feel when shifting gears when paired with our Shortcut Shift Plate system. The lightened weight will also allow for faster shifts. Available for 07-09 Mazdaspeed 3, 10+ Mazdaspeed 3, and 06-07 Mazdaspeed 6.

Features:

• 75% lighter than OEM
• Faster shifts
• Made out of lightweight 6061-T6 billet aluminum
• Street and track torture tested
• Black anodized / Torque Solution Laser engraved
• Lifetime Warranty
• Made in USA

Torque Solution Shortcut Shift Plate was designed to reduce that dreaded pickup truck like long throw shift mechanism in the Mazdaspeeds. Our system will give you a more positive and direct feel when shifting gears. Designed for a lifetime of abuse with anodized 6061 billet aluminum. Paired with our counterweight you’ll have the ultimate in short shift setups. Also available for 07-09 Mazdaspeed 3, 10+ Mazdaspeed 3, and 06-07 Mazdaspeed 6.

Features:

• Shortens throw by ~32%
• Improved 60fts / e.t’s
• Made out of lightweight 6061-T6 billet aluminum
• Street and track torture tested
• Black anodized / Torque Solution Laser engraved
• Lifetime Warranty
• Made in USA

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Torque Solution for more products.

The slow market growth and high unemployment rates that arose with the most recent credit crisis have battered consumer confidence in the U.S economy. For a short period, major automotive companies in the U.S. were upside down and needed some serious financial support. New ideas needed to develop in order to bring back these struggling giants.

Ford has most certainly adapted their marketing objectives in the right direction. One of the newest fuel efficient vehicles they manufacture reaches out to the trendy gas savers. The Ford Fiesta has been recognized as a popular sub-compact outside the U.S. for quite some time and now it is the ideal car for smart commuters in the U.S. It offers an EPA estimated fuel economy of 40 miles per gallon.

If you are looking to squeeze a few extra ponies out of your 2011 or 2012 Ford Fiesta with 1.6 liter engine, take a look at K&N‘s power gaining air intake, part number 69-3530TS. The 69-3530TS comes equipped with a K&N high flow washable and reusable air filter, durable heat shield, and a low restriction intake pipe. K&N also includes a descriptive step by step instruction sheet and all the hardware necessary to install it. K&N testing has shown this combination adds an estimated gain of 3.79 horsepower at 4518 rpm.

Hours of research and development have gone into producing the 69-3530TS air intake, so owners can be assured it will fit and function properly on your 2011 or 2012 Ford Fiesta with 1.6 liter engine. The air intake is also backed by the K&N Million Mile Limited Warranty. There is no need to even think about purchasing another throw away air filter.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click K&N for more products.

Mishimoto Jeep Wrangler radiator hoses are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

Mishimoto guarantees superior performance and quality with an unmatched lifetime warranty on all parts.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Mishimoto for more products.

Get your Zoom back with the all-new SP6069, a true Cold Air Intake system that transforms itself into a Short Ram to get through any weather condition.

In addition, this system comes pre-tuned from Injen Technology ready to deliver up to 10 h/p and 9 ft/lbs of torque, the perfect weapon! As an added bonus, Injen now offers a web/Nano-fiber dry filter in every kit, the first surface loading dry filter that traps contaminants on the surface while accelerating air-flow.

Injen Technology – The World’s First Tuned Air Intake System!

Key Features:

• MR Technology – tunes intakes to factory air/fuel ratios
• Air Fusion – controls short/long term fuel trim levels
• Web Nano-Fiber Dry Filter – the first webbed nano-fiber dry filter that catches contaminants on the surface and accelerates air flow for added performance
• Machined And Tuned Sensor Adapter
• Calibrated Sensor Housing
• Heat Shield Deflector

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Injen for more products.

Luxury and performance are two car attributes that can result in a healthy price tag. If you enjoy leather interior, climate control and a smooth ride, it comes with a premium price. As the saying goes, you get what you pay for. The Lexus IS250 is quite the complement of luxury and performance but at times it could use a little more power to get up and go. That’s where AEM comes in but the difference is the price tag. An AEM air intake will add power and performance to your IS250, however, the cost per horsepower gained is a great value. An AEM air intake brings your engine cool, dense air for extra power you can use.

AEM intake part numbers 41-1406C and 41-1406P are one of a kind intake systems manufactured to increase the engine performance and acceleration of 2006 through 2010 Lexus IS250 models with 2.5 liter engines. This is accomplished by removing the restrictive factory intake system and replacing it with low restriction components. These air intake systems include a washable and reusable Dryflow air filter that uses depth loading technology and a structural screen wire to enhance air flow. This filter provides outstanding engine protection. Also included are a custom high flow intake pipe, a powder coated heat shield and all the necessary hardware to complete the installation.

The main feature of 41-1406C and 41-1406P is the Electronically Tuned Intake (ETI) module which allows the mass air flow (MAF) sensor to read proper air density instead of using physical tube designs intended to get the correct airflow going by the MAF sensor. These AEM intake systems are tuned, for use on an IS250, with focus on performance gains throughout the power band. The result is a great design that increases power while working in-step with the vehicle’s computer.

Power testing on these intakes showed an estimated increase of 6.6 horsepower at 5900 RPM. A power gain chart is available showing the test results. These AEM cold air intake systems can be installed with simple hand tools. A step by step installation sheet for easy installation is included.

AEM’s high quality air intake systems are backed by a lifetime limited warranty. These air intakes are identical except for the tube finish. The 41-1406C is designed with a gunmetal gray powder coating and 41-1406P has a polished chrome-like finish- two great finishes and one significant horsepower gain.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click AEM for more products.

Advanced Clutch Technology (ACT) has released performance clutch kits for the 1999-2001 Porsche 911 Carrera and Carrera 4.

ACT’s new clutch kits for the Porsche applications listed above include a Heavy Duty pressure plate, a choice of disc, release bearing, pilot bearing and alignment tool. The Heavy Duty pressure plate features a precision stamped cover for maximum consistency and rigidity, and a thicker casting with a wider friction surface area that allows for higher heat capacity and longer clutch life. The pressure plate also incorporates hardened diaphragm fingers for decreased bearing surface wear and is designed within the optimum working range to maximize clutch life, clamp load and release travel.

The ACT Street clutch kits combine the Heavy Duty pressure plate with a rigid-hub street disc. The disc features special performance organic friction materials able to withstand increased heat and abuse, steel-backed linings for high-burst strength and modifications engineered for quicker shifting. The ACT Street clutch kits provide a moderate and consistent pedal feel, smooth engagement and significantly improved durability. These kits meet SFI Spec 1.1 and have increased torque capacity up to 560 lbs./ft.

The ACT Race clutch kits combine the Heavy Duty pressure plate with a cerametallic Xtreme Race disc, which is available in 6-pad and 4-pad rigid-hub designs. These discs are very durable while allowing for quick shifting. The Xtreme Race discs are for high-powered engines and recommended for track use only. The ACT Race clutch kits meet SFI Spec 1.1 and will hold 715 lbs./ft. of torque.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click ACT for more products.

Blackworks Raicng Honda/Acura B-Series Turbo Manifolds are designed and manufactured in the USA! Made from High Quality Stainless Steel, our Side Mount Manifolds are Tig-Welded and back purged to ensure the highest quality product. Our flanges are machined flat ensuring a perfect seal. Blackworks Flanges are produced in our facility from 1/2” plate 1018 Steel, CNC machined unlike the cheap laser cut flanges on the market. Each stage of manufacturing is passed through our quality control team to ensure the end user gets a top notch product. The quality and performance sets the bar.

Available with dual 38mm Vband flanges or dual 44mm Vband flanges.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click BWR for more products.

Enthusiasts who push their high-performance cars to the limit understand the importance of keeping their oil temperatures low to prevent damage, or even seizure of the engine. The Mishimoto Universal 19 Row Oil Cooler will extend the life of your engine by ensuring your essential high-wear engine components such as piston rings, skirts and cam bearings are sufficiently lubricated with cooler oil.

Mishimoto guarantees superior performance and quality with an unmatched lifetime warranty on all parts.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Mishimoto for more products.

The long awaited Legacy Master Cylinder Brace is finally finished and shows to be one of the most intricate brace designs we have created on yet! The brace will fit any 08-09 Legacy and LegacyGT with VDC and will fit any 08+ Impreza/WRX/STi. Thats right folks, we were able to tweak our existing 08+ Impreza/WRX/STi design to make it compatible with the newer Legacy and LegacyGT.

Functionality, it’s what you can expect from GrimmSpeed!

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click GrimmSpeed for more products.

Eibach PRO-KIT is the perfect answer for most frequently-driven street cars. It’s our legendary spring system that dramatically improves both a vehicle’s performance and appearance.

PRO-KIT lowers your WRX’s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach PRO-KIT is the finishing touch to a winning recipe for performance. PRO-KIT also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Pro-Kit #7723.140

• High Performance Handling and Aggressive Good Looks
• Lower Center of Gravity — Lowers WRX 0.8″ Front and 0.8″ Rear
• Stop Quicker, Corner Faster and get Better MPG
• Excellent Ride Quality
• Million Mile Warranty

Every Eibach PRO-KIT is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, PRO-KIT provides the ultimate balance to take your passion for driving to a whole new level.

To order click on image. For more information call:

“1-800-997-TINT”

or email

Everette@RPMSuperStore.Com

Click Eibach for more products.