Author Archives: RPM

ACT New Streetlite Flywheel For ’07-’09 350Zs!

Advanced Clutch Technology (ACT) is pleased to introduce our new lightweight, SFI Spec. 1.1 Certified, XACT flywheel for the 9/06-08 Nissan 350z 3.5L V6 (VQ35HR).

This high quality, forged Chrome-moly steel flywheel is CNC-machined and features a induction hardened integral ring gear for increased durability. ACT flywheels are engineered for strength and precision balanced for smooth operation. Driver and spectator safety are top priority at ACT. Each ACT flywheel is certified to meet SFI Spec 1.1 standards, making them legal for competition where SFI 1.1 certification is required or recommended. XACT flywheels come complete with an official SFI sticker and serial number, as required for certification.

The new XACT StreetLite 600590 flywheel, weighing in at 17.1 pounds, provides quicker engine response and acceleration, while being significantly lighter than stock.

 

 

For more information call “1-800-997-TINT”

Cobb Tuning New AccessPORT w/ TCM Support for GT-R!

The COBB Tuning GT-R AccessPORT, the most popular engine management solution amongst R-35 enthusiasts, just got better! Introducing the AccessPORT with transmission control module (TCM) support, the world’s first hand-held ECU and TCM flashing, managing and monitoring assistant, adding a whole new level of transmission control on top of the already impressive engine management capabilities of the original GT-R AccessPORT. COBB Tuning brings the simplicity of the AccessPORT to transmission control module flashing. Now GT-R owners can install maps to enhance launch control and make changes to important transmission settings that enhance drivability and improve performance, all with the simple push of a button!

Just like the original AccessPORT for the Nissan R-35 GT-R, installation is simple. No tools are required. No additional “piggy-back” hardware. No mailing the factory ECU or TCM across the country. No vehicle downtime. No waiting. Not even a computer is required. Just plug the AccessPORT in, flash the ECU and TCM, and enjoy the thrill of increased torque, horsepower and transmission responsiveness.

Installing the AccessPORT on the TCM starts with downloading the OEM TCM ROM for safekeeping, so the TCM can be returned to its stock configuration at any time. Once the OEM TCM ROM is stored, the AccessPORT flashes a new Level 1 map onto the TCM that is based on the Nissan LC2 logic upgrade, but increases launch revs to 3,300RPM and includes more aggressive clutch engagement and throttle curves than stock LC2 logic. The result is a positive launch that gets the GT-R off and running harder than the stock LC2 logic, but with smoother clutch engagement than the previous LC1 logic. Still not enough for you? A simple reflash of the TCM with the Level 2 map will have you experiencing the increased punch from raising the launch revs to 3,750RPM!

The R-35 GT-R transmission is an impressive, but complicated engineering wonder, and sometimes adjustments are in order to get it just right. Excessive clutch drag while stationary will cause the GT-R to want to creep forward at a stoplight, while too little drag will make it feel like an automatic’s torque converter. COBB Tuning has implemented Clutch Touch Point adjustment via the AccessPORT, offering +/-7 levels of adjustment to set clutch drag right where the driver wants it. This is a live adjustment that does not require a TCM reflash, simply select the desired level of the Clutch Touch Point engagement, hit Enter and drive!

The original AccessPORT opens the door to impressive power gains for the GT-R, which can exceed the transmission’s ability to manage that added power, resulting in clutch slip and excessive clutch wear. The AccessPORT with TCM support offers Clutch Capacity adjustment, which controls the hydraulic pressure applied to the clutch plates. Yet another on the fly adjustment without the need for a reflash, simply select Clutch Capacity from the AccessPORT menu to reveal +/-7 levels of adjustment to control clutch clamping force. Higher horsepower GT-R’s can eliminate unwanted clutch slip with a +2 or +3 level of Clutch Capacity. Don’t let all that power go to waste!

Due to the complex nature of the GT-R’s transmission, normal wear and tear can cause jerky shifting and less than ideal drivability. Nissan recommends an annual gearbox optimization routine to recalibrate the transmission. The AccessPORT with TCM support incorporates this Clutch Gear Learning routine and allows the owner to recalibrate at will, without a potentially expensive trip to the dealership. Simply follow the step-by-step instructions via the AccessPORT screen and recalibrate the transmission to eliminate wear related drivability compromises.

Of course, the Nissan GT-R AccessPORT with TCM support comes with all of the power gains and features of the original GT-R AccessPORT. Store multiple maps, live map switching on-the-fly, fast map flashing, factory in-dash display knock indicator, data logger, monitor engine sensors, measure 1/4 mile and 0-60mph times, read and clear DTC codes, even flash a valet map to prevent abuse while out on the town or an antitheft map to prevent engine start. For the ultimate power gains, have your GT-R professionally tuned on a dyno by a tuning expert and extract the maximum horsepower available from your combination of performance enhancing modifications. And should the need ever arise, simply uninstall the AccessPORT and the ECU and TCM are restored to their original condition.

The COBB AccessPORT with TCM support is the ultimate engine and transmission management solution available for the Nissan R-35 GT-R. Access the potential of your Nissan GT-R today!
•Original GT-R AccessPORT owners can upgrade their AP-NIS-005 to AP-NIS-006. Please call1-800-997-TINT for more information and order processing.
•Please note that TCM support is designed for stock GT-R transmissions. It is not recommended for GT-R’s with aftermarket clutch packs and other non-OEM components.

 

For more information call “1-800-997-TINT”

Mishimoto A Cooler Accessory To The Cool 99-02 BMW Z3!

Mishimoto has just unveiled an aluminum radiator designed for the 1999-2002 BMW Z3. The Mishimoto BMW Z3 radiator is the ideal upgrade to the stock radiator. Whether your car is daily driven or taken to the track, your car will be protected from overheating, thanks to improved cooling efficiency.

The overall performance of your engine will be improved by the lightweight dual core Mishimoto radiator made of 100% brazed aluminum. Installation is made easy by a direct drop-in replacement for your stock radiator with no cutting or modification required.

 

For more information call “1-800-997-TINT”

JDM Go Green Engine Dress Up

Honda was and is the original green machine! By utilizing some of the most advanced technologies, Honda was able to achieve more HP per liter than most any other engine manufacturer could dream of. In honor of Hondas unbelievable efficiency, we are offering a limited edition run of GO GREEN engine dress parts!

Each GO GREEN engine dress up kit includes a battery tie down, five fender washers, oil cap, and cam seal. This kit is compatible with B-Series equipped honda vehicles!

 

For more information call “1-800-997-TINT”

AEM 2010 V6 Camaros Get Even Faster With New Intakes!

Nowadays, V6 muscle cars mean business, and the new 2010 V6 Chevy Camaro is no exception. With its direct-injected, DOHC 304HP V6 engine, a choice of 6-speed manual or automatic transmissions, and a sporty independent rear suspension, the new V6 Camaro can out-gun many older V8 models both at the drag strip and at your local road course. With that much power and value straight from the factory, the challenge to create an air intake that would beat the competition would not be easy.

After several months of testing four different prototypes with CFD (Computational Fluid Dynamics) analysis, in-vehicle fuel-trim tests, under hood thermal analysis, and vehicle dyno tests, AEM Induction’s engineers were still not satisfied with the results. While testing a 5th prototype they found it had no advantage over competitor designs. Our conclusion at that point was simple: Compromise is not an option. It was back to the drawing board.

AEM engineers came up with 4 more designs and put them through their usual onslaught of tests. In total, 9 designs with 24 variables were run through dozens of flow tests and over 180 dyno pulls on 6 different vehicles! The ultimate reward came when they finally designed a winner with impressive mid-to-high range power. The results for the new AEM 21-8028DC with a gunmetal gray finish and 21-8028DP with a polished finish were what AEM engineers were looking for in a Cold Air Intake Systems for the 2010 V6 Camaro. Testing revealed a maximum power gain of 16.39 HP @ 5350RPM and 17.57 ft-lbs of torque @ 2600RPM at the rear wheels!

AEM’s new 21-8028DC and 21-8028DP Cold Air Intake Systems for the 2010 V6 Camaro use a bolt-on kit, including a large 2-piece, 3.5-inch diameter mandrel-bent intake tube made from high-grade aluminum. The intake tubes include a venturi insert to contour the air flow at the MAF sensor position, maintaining the factory calibration while allowing a greater volume of air into the engine. The new MAF position reduces heat soaking of the integral IAT sensor, a common issue with the stock intake system, allowing it to read true intake air temperatures instead of hotter surface temperatures. An OEM-quality MAF extension harness is included.

The 21-8028DC and 21-8028DP intake tubes position the large, AEM DryFlow performance air filter in the optimal location for cool air. As a result, the V6 Camaro’s windshield washer fluid reservoir had to be replaced with a smaller, lightweight washer bottle mounted in a new location. An OEM-quality washer pump extension harness and a powder coated mounting bracket are also included. Just bolt it on, plug it in, and GO! AEM provides detailed instruction instructions that make installing this power gaining air intake on your Camaro V6 easy.

The AEM DryFlow air filter has a large surface area and a velocity stack inlet design that outflows the V6 engine’s requirements. The oil-free synthetic DryFlow technology is extremely durable and easy to clean. To further enhance the filtration properties of the DryFlow performance filter, AEM also offers DryFlow Pre-Filters. Designed to prevent splashes of water or mud from saturating the DryFlow air filter, AEM’s pre-filters are manufactured from a durable micro-screen material that is pretreated with a proprietary hydrophobic process.

 

 

For more information call “1-800-997-TINT”

AEM Hyundai Genesis Intercooler Kit

 

Talk about big news the week of SEMA! AEM has just thrown the gauntlet on the intercooler market with this brand new AEM Front Mount Intercooler Kit for the 2010+ Hyundai Genesis Coupe. The Hyundai Genesis Coupe has proven itself as a worthy competitor in the sport compact market with it’s 4b11T derived 2.0L turbo. With it’s already impressive response to modification, the new AEM Front Mount Intercooler Kit is sure to up the ante and take the Hyundai’s performance to the next level.

 

For more information call “1-800-997-TINT”

JDM Quick Release Fasteners

Password:JDM Quick Release Fasteners are ideal for front bumpers, rear bumpers, and trunk / hatch lids, that you need to remove frequently, or remove and reinstall quickly, such as in the pits. Our quick release fasteners are for off road use only.

Password:JDM Quick Release Fasteners are precision machined from billet aluminum, and have a black anodized finish. Includes stainless steel hardware and is sold as one pair.

 

For more information call “1-800-997-TINT”

DEI More Heat Sleeve/Shroud And Fire Sleeves For the Masses!

With increased demand in longer lengths of some of our most popular line & hose heat protective sleeving products, Design Engineering is pleased to offer the following on spools.

These are ideal for those jobbers wanting the ability to sell Heat Sheath, Heat Shroud and Fire Sleeve by the foot. Heat Sheath and Sheat Shroud—with Velcro edges—are ideal for reflecting heat while Fire Sleeve offers excellent insulation from extreme heat conditions. Besides handling high heat environments, they also guard against road grime, oil & chemical spills and more.

Jobbers now have the option of selling DEI line & hose sleeving in the lengths their customers want!

 

 

For more information call “1-800-997-TINT”

Koyo New Hyper Core Racing Radiator For Evo 7-9!

Koyorad is proud to introduce a cooling solution for 2003-2007 Mitsubishi Evolution race vehicles with upgraded front facing turbo systems. For off-road use only, this half length radiator is intended for sprints, small track, and gymkhana type courses. It features an all new, ultra high density 48mm “Hyper” performance core. The reduced length allows for an off-center mounting position, which keeps radiant manifold heat away from its core. Like every Koyorad All Aluminum Performance Radiator, the OEM electric fan will bolt up directly without modifications. Unique sliding fan mounts allow for an easier installation of aftermarket universal slim fans, freeing up additional engine bay room and reducing weight. Koyorad integrates a 1/8” NPT female accessory fitting (supplied with a threaded plug) to accept temperature sensors typically supplied with most aftermarket temperature gauges. This radiator will fit global market Evolutions: IV, V, VI, VII, VIII, and IX.

Koyorad’s global reputation for high quality cooling products begins with the selection of the finest materials. Koyo privately owns each factory, never outsources their manufacturing and overseeing each stage of production using Japanese made equipment throughout the production of each radiator. Koyorad All Aluminum Performance Radiators are hand assembled, precision TIG welded, and triple pressure tested throughout the manufacturing process contributing to reliability and uniformity. The superior quality of Koyorad all aluminum radiators will take your vehicle’s engine performance to the next level.

Features:
•Koyo “Hyper” Series 48mm Core Technology
•Reduced size and weight
•Exclusive brushed aluminum finish
•Nocolok-R Brazing
•Precise Tube and Fin alignment
•Billet aluminum filler neck
•1/8” NPT Accessory Fitting and threaded plug
•Billet aluminum drain plug

 

For more information call “1-800-997-TINT”

Injen More With New Intake For 2010 Volkswagen Golf GTI!

et ready to ditch that old, restrictive air box with Injen’s all new SP3071! Equipped with our patented MR step-down process and Air Fusion, this power-packed intake will grab you by the seat of your pants with a massive 9 h/p and 8.5 ft./lbs. of torque! A functional aluminum front air duct that draws cool air is incorporated into the intake design. In addition, Injen now offers a Web nano-fiber dry filter, the first top-loading filter that stops contaminants on the surface while accelerating air flow.

Key Features:
•MR Technology – Tunes intake to factory air/fuel ratios
•Patented Air Fusion – Controls short/long term fuel trim levels
•Web Nano-Fiber Dry Filter – The first webbed nano-fiber dry filter that catches contaminants on the surface and accelerates air flow for added performance
•Machined and Tuned Sensor and Air Pump Adapter
•Calibrated Sensor Housing
•Functional Aluminum Front Air Scoop
•Mandrel-Bent Prime Aluminum Alloy

 

For more information call “1-800-997-TINT”