Advanced Clutch Technology (ACT) is pleased to introduce our new lightweight, SFI Spec. 1.1 Certified, XACT flywheel for the 2011 Ford Mustang GT 5.0L.

This high quality, forged Chrome-moly steel flywheel is CNC-machined and features a induction hardened integral ring gear for increased durability. ACT flywheels are engineered for strength and precision balanced for smooth operation. Driver and spectator safety are top priority at ACT. Each ACT flywheel is certified to meet SFI Spec 1.1 standards, making them legal for competition where SFI 1.1 certification is required or recommended. XACT flywheels come complete with an official SFI sticker and serial number, as required for certification.

The new XACT ProLite 600430 flywheel, weighing in at 14.2 pounds, provides quicker engine response and acceleration, while being significantly lighter than stock.

For more information call “1-800-997-TINT”

KW suspensions announces their stainless steel constructed Variant 3 coilovers for the 2006+ Honda Civic.

The KW coilover suspensions for the 2006+ Honda Civic enables the owner to lower their vehicle 25-65mm on the front axle and 25-60mm on the rear axle and retains enough travel to handle maximum load and dynamic loads during driving. Adjustable (and independent reacting) rebound and compression damping allows a truly individual performance driving setup for those technically demanding drivers. Compression dampening adjustment is conducted in the low-speed range, while the high-speed set-up, so decisive for driving comfort, has been pre-set by KW engineers. All KW coilovers come with a lifetime warranty and pass stringent German TUV safety & quality testing standards. Each kit is TUV approved.

For more information call “1-800-997-TINT”

The all-new SP9015 will catapult you into the lead with up to 6 h/p and 7 ft/lbs of torque! This system offers dual tuning capabilities to correct air/fuel ratios and short/long term fuel trim levels. All systems come with the first surface loading nano-fiber dry filter that catches contaminants on the surface while accelerating airflow. Buy from the company that brought you, The Worlds First Tuned Air Intake System.

Key Features:
•MR Technology – Tunes intakes to factory air/fuel ratios
•Air Fusion – Controls short/long term fuel trim levels
•Web Nano-Fiber Dry Filter – The first webbed nano-fiber dry filter that catches contaminants on the surface and accelerates air flow for added performance
•Machined And Tuned Sensor Adapter
•Calibrated Sensor Housing
•Strategically Located Intake Bracket
•Mandrel-Bent Prime Aluminum Alloy

For more information call “1-800-997-TINT”

Add that last finishing touch to your 2008+ Mitsubishi Lancer Evolution X engine bay with these all new Password:JDM Engine Bay Dress Up Kit! Offered in anodized black, blue, gold, purple, red, gunmetal, silver, and the all new green these fender washers feature the Password:JDM Kenji logo. All Password:JDM fender washers are constructed from aircraft grade aluminum and are matched up with long lasting stainless steel bolts.

The Password:JDM EVO X Engine Bay Dress Up Kit inlucdes a total of 50 washers and stainless steel bolts.

Package Includes:

•32 x Small Washers
•32 x 6M Bolts
•12 x Large Washers
•12 x 8M Bolts
•4 x Nuts & Washers

For more information call “1-800-997-TINT”

Advanced Clutch Technology (ACT) is pleased to introduce its new twin-disc kits for the 2011 Ford Mustang GT equipped with 5.0L V8 engine.

The ACT twin-disc kits offers Mustang enthusiasts a wide range of street-friendly to race-ready kits with torque capacities from 850-1450 lbs/ft of torque. All kits offer two discs which amounts to twice the surface area as compared to a conventional clutch design and results in better wear characteristics, a high heat capacity and long life, and include our proprietary precision ground floater lift system, which allows for adjustment to compensate for wear. Each kit offers a choice of three different clamp load designs for unparalleled performance and moderate pedal effort. Users also have the option of choosing disc combinations that feature high torque capacities along with smooth consistent engagement.

All ACT 2011 Mustang twin-disc kits include a CNC-machined and dynamically balanced flywheel to ensure smooth, trouble free installation and operation.

For more information call “1-800-997-TINT”

Ready to put that crowning jewel on your new motor? Blackworks Racing Oil Caps are the answer. Made from Quality billet aluminum and CNC-Machined to perfection, Blackworks Racing Oil Caps are a direct swap for your OEM oil cap. Currently available in black, blue, silver, red, gold and purple with more to come.

For more information call “1-800-997-TINT”

We are excited to finally have this new header ready for release. While the 02-06 RSX Type-S and 02-05 Civic Si have both been out for some time now, we are confident that this header still has ample demand in the marketplace. The quality/performance/price point of the Skunk2 Header is unmatched in the current header space for these vehicles.

For more information call “1-800-997-TINT”

The Password:JDM Upper Intercooler Pipe eliminates hose expansion to increase throttle body response going into boost. Dyno proven performance, not hype! Our UIP features a single piece 2.5″ mandrel bent design for maximum performance. Includes high quality 4-ply silicon couplers and new hose clamps!

For more information call “1-800-997-TINT”

Moroso has come out with a new coolant explansion tank that fits: Ford Racing Supercharger Kits for Mustang 5.0, 2011-Up; Roush Supercharged Mustangs & Supercharger Kits for Mustangs, 2005-Up.

Features:
•Not just beautiful but functional, too
•Replaces the plastic Super Charger tank that comes on the Roush® Supercharged cars and in the Roush® Super Charger kits
•Fabricated of aluminum for strength, plastic tanks can fail over time.
•Can be polished, chromed, powder coated or left as-is for a race look
•Superchargers put off heat, unlike plastic tanks, Part No. 63496 can be packed with dry ice for the Drag Strip or Dyno. pulls for quicker E.T’S and more horsepower
•Made in USA

For more information call “1-800-997-TINT”

HKS USA, Inc., premier aftermarket performance parts manufacturer, releases its line of performance products for the Honda CR-Z.

New line up for CR-Z:
•Hi-Power Exhaust – Full catback & rear section only versions
•Racing Suction Reloaded Kit
•Metal Head Gasket Set – In 0.8mm thickness or 1.2mm thickness
•Hipermax III

For more information call “1-800-997-TINT”