Drop Engineering Ford Mustang Front Differential bushings are the ideal replacements to the stock Ford Mustang rubber bushings. Drop Engineering differential bushings are precision machined using aluminum. Replacing your OEM bushings with top of the line Drop Engineering Bushings will significantly reduce wheel hop and improve acceleration, providing optimal performance for any vehicle. This front differential support kit includes tapered shimming washers for flexibility in setting pinion angle.Drop Engineering has just released rear upper control arm bushing kits for the 1999-2004 Ford Mustang Cobra. If you are tired of the wheel hop experienced with independent rear suspension, Drop Engineering offers the perfect solution with Delrin upper control arm bushings and inner crush sleeves made of hard coat anodized aluminum. The stock bushings on the 1999-2004 Ford Mustangs are made of soft rubber, which is an inferior material for this application due to its compressibility. The undamped compression of the rubber allows for wheel hop, which is exacerbated by the repeated loss and gain of traction in the rear tires. The kit includes hard coat anodized aluminum sleeves and Delrin bushings designed with inner and outer diameter grease grooves.

Drop Engineering Ford Mustang Front Differential bushings are the ideal replacements to the stock Ford Mustang rubber bushings. Drop Engineering differential bushings are precision machined using aluminum. Replacing your OEM bushings with top of the line Drop Engineering Bushings will significantly reduce wheel hop and improve acceleration, providing optimal performance for any vehicle. This front differential support kit includes tapered shimming washers for flexibility in setting pinion angle.

Drop Engineering Ford Mustang Rear Subframe Bushings are the ideal replacements to the stock Ford Mustang rubber bushings. Drop Engineering rear subframe bushings are precision machined using white UHMW. Replacing your OEM bushings with top of the line Drop Engineering rear subframe bushings will significantly reduce wheel hop and improve acceleration, providing optimal performance for any vehicle. The kit includes hard coat anodized inner aluminum sleeves and aluminum washers.

For more information call “1-800-997-TINT”

The ALTA AccessPORT allows you to unlock your vehicle’s hidden power!

Simply plug into your OBD diagnostics port, and in minutes you can change the ECU programing to give you an additional 20-40 Wheel Horsepower. No cutting, wiring, or other such modifications, simply plug-and-play.

ALTA Custom Tuned Staged Maps are included with every purchase that will give as much as 40 Wheel Horsepower and as much as 100 ft/lbs Wheel Torque gain, over stock levels. Also gives you the ability to easily change maps as you upgrade to new parts for your car. With the ALTA AccessPORT, the possibilities are endless!

PROVEN HORSEPOWER
Powerful tuning software provides access to the heart of the ECU. Take a look at our dyno graphs to see how much power you can unlock!

PERSONALIZED MAPPING
Unlock impressive power gains hidden within your ECU with ALTA Custom Tuned Maps chosen for your vehicle specifications.

AMAZING FEATURES
Change maps, Logging Data, Launch Control, View Live Data, ECU settings, Read and Clear DTC / CEL codes.

COOL FUNCTIONS
The ALTA AccessPORT is the ultimate ECU flashing device. The intuitive interface and full color screen become an integral part of your driving experience!

For more information call “1-800-997-TINT”

KW suspensions announces their aluminum bodied Variant 3 coilovers for the 2006+ Audi R8.

The KW coilover suspensions for the 2006+ Audi R8 enables the owner to lower their vehicle 0-20mm on the front axle and 0-25mm on the rear axle and retains enough travel to handle maximum load and dynamic loads during driving. Adjustable (and independent reacting) rebound and compression damping allows a truly individual performance driving setup for those technically demanding drivers. Compression dampening adjustment is conducted in the low-speed range, while the high-speed set-up, so decisive for driving comfort, has been pre-set by KW engineers. All KW coilovers come with a lifetime warranty and pass stringent German TUV safety & quality testing standards. Each kit is TUV approved.

For more information call “1-800-997-TINT”

Bring your Kia Forte up to speed with the all new SP1321! This masterpiece is made using the patented MR step-down process and comes equipped with the innovative air intake horn. You’ll be amazed with the astonishing gains of 11 h/p and 9.5 ft/lbs of torque. In addition, Injen now uses a Web nano-fiber dry filter in all its applications, a surface loading filter that not only aids in producing horsepower but helps protect your engine from harsh and dirty environments. Injen Technology, Pioneers of Performance Tuned Air Intake Systems.

Key Features:
•MR Technology – Tunes intakes to factory air/fuel ratios
•Velocity Air Horns – Controls and speeds up air into intake tract
•Web Nano-Fiber Dry Filter – The first webbed nano-fiber dry filter that catches contaminants on the surface and accelerates air flow for added performance
•Mandrel-Bent Aerospace Aluminum Alloy
•Air Box Cover Plate With Louvers

For more information call “1-800-997-TINT”

ST suspensions announces their performance coilover for the Volkswagen Golf Mk6, Mk6 GTI and Mk6 TDI.

The ST suspensions coilover for the VW Golf Mk6 series enables the owner to lower their vehicle 1.6-2.6 inches (0.4-1.6 inches GTI) on the front axle and 1.6-2.6 inches (0.6-1.6 inches GTI) on the rear axle and retains enough travel to handle maximum load and dynamic loads during driving. ST suspensions coilover with its preset dampening rates permits customized lowering of the suspension and creates an optimized balance of sportiness, comfort and safety.

Important characteristics such as safety, quality and performance are all taken into consideration with each ST suspensions coilover design. Each vehicle application is specifically designed and engineered for a proper range of motion, min/max weight loads and min/max lowering. All these requirements are met while retaining its performance handling characteristics. Each ST suspensions coilover is constructed of zinc plated threaded strut housings and utilized a compression bumpstop with integrated dust boot for additional ride comfort and long term durability.

All ST suspensions coilovers pass stringent German TUV safety and quality testing standards. Each kit is TUV approved.

For more information call “1-800-997-TINT”

Mishimoto has just unveiled the Mishimoto X-Line Aluminum Radiator designed for the 1990-1997 Mazda Miata. The Mishimoto Mazda Miata X-Line Radiator is engineered with a larger 3 row core to maximize cooling efficiency, boost engine functions, and protect your car from overheating. The Mishimoto X-Line radiator, made of 100% brazed aluminum, is designed to be a direct OEM fit. Installation will be effortless with no cutting or modification required. Purchase of the radiator includes a high pressure 1.3 bar Mishimoto radiator cap, a magnetic drain plug, and every component is backed by an excellent lifetime warranty.

For more information call “1-800-997-TINT”

Drop Engineering Engine Mounts for the 1990-1994 Mitsubishi Eclipse are assembled from powdercoated steel and come equipped with rigid polyurethane bushings, tested at a durometer of 75, to more efficiently transfer your vehicle’s power to the wheels.

When you accelerate, there is a noticeable lag created with stock OEM mounts due to movement of the motor. Vehicles outfitted with Drop Engineering Performance Engine Mounts will see quicker engine response and easier shifting even at a higher RPM. A Drop Engineering Racing Engine Mount kit is an ideal upgrade for any driver looking for improved performance, but is also highly recommended when installing a new motor as a replacement for worn out factory mounts.

Drop Engineering continues to support you with superior performance, quality and an unmatched lifetime warranty on all parts. Click here for more information on these engine mounts.

For more information call “1-800-997-TINT”

Most people who buy the Skunk2 72mm Throttle body for their 06+ Civic Si will not be able to bore their intake manifold to 72mm. So P2R has come up with a solution for those to help you get as much out of your bigger throttle body as possible. This new tapered bore spacer from P2R starts off as 72mm and is tapered down to the factory intake manifold opening. This will allow for a smooth transition between the bigger bore throttle body and the factory intake manifold.

For more information call “1-800-997-TINT”

APEXi has introduced their new S1 Dampers for the 2007+ Infiniti G35 Sedan and G37 Coupe!

Product Specs:
•Front: 12kgf – 8 inch
•Rear: 12kgf – 6 inch + helper spring
•Piston Diameter: 45mm
•Includes all hardware

For more information call “1-800-997-TINT”

Eibach PRO-KIT is the perfect answer for most frequently-driven street cars. It’s our legendary spring system that dramatically improves both a vehicle’s performance and appearance.

PRO-KIT lowers your Ford’s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach PRO-KIT is the finishing touch to a winning recipe for performance. PRO-KIT also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Pro-Kit #35125.140

• High Performance Handling and Aggressive Good Looks
• Lower Center of Gravity — Lowers Mustang 1.0″ Front and 1.5″ Rear for 5.0L V8 or 0.8″ Front and 1.2″ Rear for 3.7L V6
• Stop Quicker, Corner Faster and get Better MPG
• Excellent Ride Quality
• Million Mile Warranty

Every Eibach PRO-KIT is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, PRO-KIT provides the ultimate balance to take your passion for driving to a whole new level.

For more information call “1-800-997-TINT”