Ford’s 2009 and 2010 F-150′s come with numerous amenities that combine the comfort of a luxury sedan with truck functionality. Some of the accessories available from Ford that help to enhance the experience drivers enjoy include upgraded highly durable mats, tow accessories, Tonneau covers, alloy wheels, a remote starting system, bed liners and much more. In order to enhance the engine performance of this truck our engineering team has developed a 63 series Air Charger air intake system and given it the part number 63-2580. Our 63-2580 intake system is not designed to be used with 2 valve VIN W vehicles.

Through our tried and tested methods of engineering, that have been fine tuned over the 42 years K&N has been in business, we’ve been able to achieve an estimated increase of 16.14HP at 4650 rpm with this intake. This high flow air intake achieves these exceptional and realistic numbers by eliminating restrictive points in the stock air intake system. We eliminate the factory air box, stock air filter, resonator chambers and the stock intake tube. We replace these air restrictive components with K&N’s high flow intake tube, open element round tapered air filter and heat shield. Our high flow intake tube streamlines air flow by allowing it to flow through the intake tube and throttle body in a highly efficient way. When this is coupled with our high flow open element air filter number RC-5173 we achieve overall better performance. Our 63-2580 Air Charger system will increase horsepower, torque and throttle response. Obviously this tends to result in a more rewarding driving experience.

The replacement air filter part for this intake system is RC-5173. It can go for up to 100,000 miles before servicing is necessary depending on driving conditions. This filter also has a K&N Drycharger wrap option available to give your truck an even longer service interval. K&N filter wraps are great when a lot of your driving is in dusty environments. Our RC-5173DK air filter wrap is water resistant and made from a silicone treated polyester material and can be cleaned using a soapy water solution.

Our 63-2580 Air Charger intake system takes about 90 minutes or less to install with common hand tools. It uses stock mounting points, incorporates your vehicle’s factory electronic components into the system, requires no drilling and it is covered by the K&N Million Mile Limited Warranty.

For more information call “1-800-997-TINT”

Momentum Performance is an innovative company out of Wilmington, North Carolina that is making a name for itself and earning respect as a new top quality player in the Automotive Aftermarket parts industry. Their products are designed with state of the art technology, informed craftsmanship and are tested under track conditions. Momentum Performance products advance power performance and aesthetics.

This leading-edge company is pushing the industry forward, in a revolutionary way, We haven’t seen quality like this in this industry, ever – Sharif Abdelbaset, Forged Performance by delivering complete, integrated lines of high performance products that allow auto enthusiasts to progress at their own pace, based on their own performance goals.

Momentum’s product suites progress from Cold Air Intake,through various levels, up through to Turbo Kit, allowing Dealers the freedom to design a progression plan that best fits their customers needs and goals, while being extremely cost efficient.

The impeccable design quality and fitment of impeccable design quality and fitment…Momentum Performance parts greatly aids Dealers in faster more predictable installation times, increasing profitability.  This also makes customers more confident that the final product will perform as promised for years to come, making their investment much more valuable and appreciated.

Momentum Performance’s 350Z / G35 Products:

350Z / G35 Cold Air Intake

The Momentum Performance Cold Air Intake stands apart from the competition thanks to its placement in the high pressure zone present behind the vehicle’s front bumper. The high pressure ram air effect resulting from this mounting strategy introduces the highest volume of cold air possible to the engine, reducing heat soak and improving overall power production.

350Z / G35 Single and Dual Exhaust Systems

Momentum Performance Exhaust Systems are manufactured out of TIG welded, CNC mandrel bent 304 stainless steel, which not only offers exceptional durability and build quality but also significant weight savings over the stock exhaust design. In terms of performance, the Momentum Performance Exhaust systems dramatically improve air flow, making it a solid choice for both turbocharged and naturally-aspirated engines alike.

350Z / G35 Headers

Momentum Performance Headers have been specifically designed to offer top shelf performance for both naturally-aspirated and turbocharged engines. The versatility of Momentum’s Headers is the perfect representation of the brand’s “Push Forward” philosophy, allowing drivers a wide range of options when it comes to improving the street or track performance of their vehicles.

350Z / G35 Control Arms

Momentum Performance Control Arms make use of one-piece billet 7075 aluminum construction, which reduces the weight of these suspension components compared to the stock units while at the same time adding rigidity, strength and response.

350Z / G35 CAT Delete (Y) Pipe Kit

The Momentum Performance Y-Pipe is a true track-oriented product specifically designed for hardcore racers seeking to “Push Forward” past the limits of their vehicle’s stock exhaust system. The Y-Pipe reduces exhaust heat, flow matches exhaust gases for more power production and improves engine breathing.

350Z / G35 Turbo Kit

The Momentum Performance Turbo Kit has been put together with the express intent of helping street tuners and track junkies “Push Forward” and achieve their performance goals. The kit offers a fully scalable turbo solution, allowing owners to plan out their starting point and upgrade path with exceptional versatility.

For more information call “1-800-997-TINT”

Honda’s CR-Z has a sophisticated, aerodynamic shape and smooth, sleek lines that announces its arrival without saying a word. The fine styling of the CR-Z isn’t limited to the exterior. Once seated inside, drivers are treated to arguably one of the most advanced interiors Honda has ever created. In addition, the 2011 Honda CR-Z is powered by a 1.5L i-VTEC engine and is available with either a 6-Speed manual or CVT transmission. To compliment this car AEM has introduced a new intake system that boosts engine performance while seamlessly integrating into the engine bay.

AEM engineered this Cold Air intake system to relocate the air filter with sleek tubing to the outside of the engine bay in order to deliver air with lower temperatures to the air inlet. This aids in achieving increased horsepower since cooler air is denser and carries more oxygen molecules to the combustion chamber.

The AEM intake design comes with choice of two finishes, gunmetal gray (part 21-700C) or polished (part 21-700P). The gunmetal gray tube is powder coated, while the finish on the polished tube is vacuum metalized. These finishes are incredibly resilient to the harsh environment that exists under the hood which can cause oxidation and fading.

The cold air intakes have an AEM Dryflow air filter, part number 21-201DK. This high flowing filter traps dust and debris through an extremely durable synthetic media. The filter incorporates a metal screen on the outside of the media that enhances airflow and aids in keeping the pleating in the proper position.

Dyno testing was done on AEM’s 2011 Honda CR-Z 1.5L air intake systems and showed an estimated increase of 4 horsepower at 5400 rpm. AEM 21-700C and 21-700P come with detailed installation instructions that take you step by step through the simple process of installing one of these air intake systems on the 2011 Honda CR-Z with the 1.5L i-VTEC engine.

AEM Air Intake Systems come with a lifetime limited warranty.

For more information call “1-800-997-TINT”

Eibach PRO-KIT is the perfect answer for most frequently-driven street cars. It’s our legendary spring system that dramatically improves both a vehicle’s performance and appearance.

PRO-KIT lowers your Jettas’s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach PRO-KIT is the finishing touch to a winning recipe for performance. PRO-KIT also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Pro-Kit #85111.140
•High Performance Handling and Aggressive Good Looks
•Lower Center of Gravity — Lowers Jetta 1.2″ Front and 1.2″ Rear
•Stop Quicker, Corner Faster and get Better MPG
•Excellent Ride Quality
•Million Mile Warranty

Every Eibach PRO-KIT is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, PRO-KIT provides the ultimate balance to take your passion for driving to a whole new level.

For more information call “1-800-997-TINT”

Mishimoto has released its 2009-2010 Nissan Cube Performance Aluminum Radiator. The Mishimoto performance aluminum radiator for the Nissan Cube is designed and engineered to maximize cooling efficiency by up to 30%, and is the perfect replacement for your OEM radiator. The Nissan Cube radiator is fashioned from 100% brazed aluminum, and the polished aluminum end tanks are also an aesthetically pleasing addition to your engine bay. Installing a Mishimoto Nissan Cube radiator is effortless with no additional modifications required for a direct OEM fit.

Mishimoto guarantees superior performance and quality with an unmatched lifetime warranty on all parts.

For more information call “1-800-997-TINT”

Get ready to ditch that old, restrictive air box with Injen’s all new SP3071!

Equipped with our patented MR step-down process and Air Fusion , this power-packed intake will grab you by the seat of your pants with a massive 9 h/p and 8.5 ft./lbs. of torque! A functional aluminum front air duct that draws cool air is incorporated into the intake design. In addition, Injen now offers a Web nano-fiber dry filter, the first top-loading filter that stops contaminents on the surface while accelerating air flow.

Key Features:
•MR Technology – tunes intakes to factory air/fuel ratios
•Patented Air Fusion – controls short/long term fuel trim levels
•Web Nano-Fiber Dry Filter – the first webbed nano-fiber dry filter that catches contaminants on the surface and accelerates air flow for added performance.
•Machined and Tuned Sensor and Air Pump Adapter
•Calibrated Sensor Housing
•Functional Aluminum Front Air Scoop

For more information call “1-800-997-TINT”

Hasport Performance is pleased to announce the new FDSTK stock replacement mount kit for the 2006-2011 Honda Civic Si. Available in several different durometers, Hasport’s urethane inserts also offer increased strength and durability over stock mounts. The FDSTK mounts replace the stock left, right and rear mounts and provide much greater control of engine movement, reducing wheel hop and helping transfer more power to ground. The decrease in engine movement will also help with clearance problems found with aftermarket parts like headers, turbo and supercharger kits, especially when using the taller K24 engine. The mounts—designed using state-of-the-art CAD/CAM software—are CNC machined in-house from 6061-T6 billet aluminum.

For more information call “1-800-997-TINT”

Competition Clutch is pleased to announce the release of their new 4G63 clutch fork.

This clutch fork has been modified so it can be used with any clutch both conventional and twin discs, from any manufacturer. The fork is made using 4140 forged steel which in turn makes the product far stronger than the OE part.

Tired of bending, warping or breaking clutch forks? Purchase ours, and never look back!

For more information call “1-800-997-TINT”

Introducing two new innovative products from CUSCO, Center-lock pillowball upper mounts and a ZERO-1 suspension kit for the Lexus CT200h.

Available for the first time, Centerlock Pillowball Upper Mounts for the Vitz, CR-Z, Fit, and Swift!
•An enhanced vehicle handling characteristic including a more direct and sharper steering feedback can be experienced. This new product is a necessity for high performance driving, dedicated for the race track.
•For vehicles with high grip tires still equipped with the normal rubber factory upper mounts, usually have the tendency of camber fluctuations causing understeer. This is due to the rubber absorbing the lateral G and stretching out of their static specification.
•By replacing the easily malleable factory rubber with CUSCO’s pillowball unit, the user will experience an efficient suspension movement relative to direct road surface feedback and increased tire grip.
•Centerlock pillowball upper mounts apply to all CUSCO suspension systems with no hassle. Also can be installed on other brands with the use of special nut & collar combination.
•In normal cases, installing pillowball upper mounts on the Vitz and Swift result in raised vehicle ride height. Also the overall strut area design on many vehicles do not make it possible for the use of pillowball upper mounts. But now with CUSCO’s new center lock design, pillowball mounts can now be adopted for higher level of suspension tuning while keeping the desired low vehicle stance.
•100% MADE IN JAPAN from high precision, durable, and long lasting NMB pillowball assemblies. Only the best and highest of quality components are utilized, especially for suspension.

The Comfort ZERO-1 series coilover suspension provides great stability especially targeted for daily driving and high speed cruising. The suspension kit is designed exclusively for vehicles equipped with a large wheel size low profile tires, such as the Lexus CT200h. The stability is still maintained even after the installation of larger aftermarket wheels, reducing the harsh bumpy feeling by utilizing the factory upper strut mounts. The result is a well balanced suspension setup that provides a stylish look for the new Lexus models.
•Full adjustable length system that maintains the entire shock stroke (front)
•CUSCO exclusive rust and corrosion residstant protective coating to guard against the harshest elements
•Developed by using CUSCO’s long history of data adopted from actual motorsports conditions
•8 way adjustable rear damper option available
•Smooth and noiseless operation at a reasonable price

For more information call “1-800-997-TINT”

The Mazda 6 was designed for the midsize sedan market and combines sporty style with practical design. Japanese automaker Mazda began production of the Mazda 6 in 2002.The Mazda 6 has proven to be a great family car due to its spacious interior, huge trunk and smooth ride.

K&N has designed a performance air intake system (69-6028TTK) for the 2009 Mazda 6 with 2.5L four-cylinder engine. The K&N 69-6028TTK air intake was dyno-tested on this vehicle and shown to increase power by an estimated 5.5 HP at 5100 rpm, while providing excellent filtration and engine protection.

K&N’s design increases horsepower in the 2009 Mazda 6 2.5L, by removing the restrictive factory airbox system and replacing it with a K&N high-flow air filter (RU-4960) and a low restriction black powder coated aluminum intake tube. The 2009 Mazda 6 is equipped with a fresh air intake scoop that delivers cooler outside air to the engine. K&N’s 69-6028TTK air intake utilizes this fresh air inlet scoop with a custom heat shield that isolates the K&N air filter from power robbing hot air surrounding the engine.

Installing the 69-6028TTK intake is simple with K&N’s installation instruction sheet. The air intake’s air filter can go for up to 100,000 miles, depending on driving conditions before cleaning is necessary. Air filter servicing is made easy with K&N’s Recharger Kit.

Owners of the 2009 Mazda 6 with the 2.5L engine can feel confident in the 69-6028TTK intake because it is backed by K&N’s million mile limited warranty.

For more information call “1-800-997-TINT”