A’PEXi is happy to introduce the new 09+ Honda Fit N1 EvX Damper to its product line up.

Product Points
•APEX Integration Exclusive Design
•Compression and Spring rates specially matched for US road conditions
•Ride settings calibrated for excellent ride quality and sports driving
•Incorporates the same N1 Damper Series high precision valve and piston for accurate settings
•The Quick Adjuster allows for easy compression ratio (ride) adjustments
•Strut types incorporates a pillow upper mount with camber adjustments
•Other types utilize a rubber upper mount to eliminate noise and preserve ride quality
•Includes dust boot to prevent oil leaks
•Includes spring seats to minimize noise

Product Features
•Full Coil Over Threaded Base
•Monotube Shock Absorber utilizing a 44mm diameter piston
•32 way ride adjustment
•62 mm direct wound spring
•22mm Strut type rod (All others use a 12.5 mm rod)
•Quick Adjuster, Coil Over Adjustment Wrench included
•Aluminum Brackets (Strut utilizes steel brackets)
•One Year Warranty for (Oil, Gas)

For more information call “1-800-997-TINT”

CUSCO Competition parts presents Rear Ventilation Panels for the Mitsubishi EVO VII~X. (CT9A & CZ4A) These vents are used by our professional rally racing team in the Asia Paific Rally Championships and complies with the strict window regulations that are enforced.

This productkeeps outside debris out of the vehicle and at the same time provides sufficient ventilation to the driver.

Key Features:
•Provides ventilatio to the inside of the vehicle where open windows are prohibited during competition
•Easily mounts between window and frame on rear windows
•Ventilates while keeping dirt out for full rally competition use
•High grade aluminum material, painted black

For more information call “1-800-997-TINT”

Injen Technology releases the 76mm to 60mm dual cat-back exhaust for the 2.0 Genesis.

This cat-back system delivers Power and Style all in one complete package! The all-new SES1386QTT Generates up to 10h/p and 8 ft./lbs. of torque. “Holy #@$%” is the response you’ll get from your jealous friends as you zoom by! This system is proudly made in the US, comes pre-tuned straight out of the box and ready to bolt-on. Nothing but the best stainless steel goes into this polished Injen masterpiece to give it that show quality look. P.S. The secret is in the S.S. built-in resonated Y-pipe, dual free flowing 60mm tubing and 4″ quad titanium tips!

KEY FEATURES:
•Easy Bolt-On Cat-Back System
•304 Stainless Steel Dual Mufflers
•One In And Two Out Resonated Y-Pipe
•Molded Stainless Steel Cast Flanges
•4″ Quad Titanium Tips With Rolled Edges And Embossed Injen Logo
•Mufflers And Resonator Come Embossed With Injen’s Signature Logo

For more information call “1-800-997-TINT”

Torque Solution Mazdaspeed 3 exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits.

Features:
•Direct Replacement
•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
•Made in USA

For more information call “1-800-997-TINT”

Advanced Clutch Technology (ACT) has released high performance clutch kits for the 2008-2010 Scion xD.

ACT’s performance clutch kits for the Scion xD feature a Heavy Duty pressure plate that incorporates hardened diaphragm fingers for decreased wear and provides a 25 percent increase in clamp force over the stock unit. The Heavy Duty pressure plate meets SFI Specification 1.1.

The ACT Street Clutch Kit combines a Heavy Duty pressure plate and a performance street disc. The disc features special performance organic friction materials able to withstand increased heat and abuse, steel-backed linings for high-burst strength and modifications engineered for quicker shifting. The ACT Street Clutch Kit provides a moderate and consistent pedal feel, smooth engagement, significantly improved durability and increased torque capacity up to 240 lbs./ft.

ACT Race Clutch Kits combine a Heavy Duty pressure plate with an Xtreme Race Disc and will hold up to 305 lbs./ft. of torque. The cerametallic Xtreme Race Discs are available in 4- and 6-pad, spring-centered and rigid-hub designs and are very durable while allowing for quick shifting. The Xtreme Race Discs are for high-power engines and recommended for track use only.

For more information call “1-800-997-TINT”

Honda’s introduction of the new CR-Z is timed perfectly to combat today’s steep gasoline prices. So enjoy the awesome fuel economy and bolt on some handling fun! Install this new Progress Technology Rear Anti-Sway Bar System for your CR-Z. The PROGRESS rear anti-roll bar is a hefty 19mm alloy steel fabrication. The bar is silent and non-adjustable, as it bolts into the OEM rear axle beam assembly. The installation is quick and easy, and requires only six fasteners (supplied) using OEM hole locations. The two OEM plastic wind deflectors on the axle beam can be trimmed using the template supplied, and reinstalled for optimized under-car aerodynamics. This system includes all necessary hardware components and installation instructions.

This new rear anti-roll bar will improve chassis balance, quicken steering response, and improve driver confidence by minimizing the uncomfortable body “lean” while cornering. All Progress anti-sway bars are manufactured in-house, feature precision MIG-welded ends, and are powder coated metallic graphite gray.

For more information call “1-800-997-TINT”

CUSCO is proud to release a new line of gauges featuring three models, boost pressure, water temperature, and pressure. The Racing meter is recommended for both competition and street use. CUSCO Racing Meters are 100% made in Japan to bring you the most advanced technology accompanied by the highest of product quality.

CUSCO Racing Meter TEMP METER
Water & Oil Temperature Capability
Includes: Gauge, wiring, temperature sensor, gauge holder, control switch, switch bracket
Display: 50°C ~ 150°C (2°increments)

CUSCO Racing Meter PRESS METER
Oil & Fuel Pressure Capability
Includes: Gauge, wiring, pressure sensor, gauge holder, control switch, switch bracket
Display: 0 kPa ~ 1000 kPa (20 kilopascal increments)

CUSCO Racing Meter BOOST METER
Boost pressure
Includes: Gauge, wiring, boost sensor, gauge holder, control switch, switch bracket
Display: -100 kPa ~ 0 kPa ~ +200 kPa

Features:
•Large 60mm gauges
•Peak and warning function
•High quality bezel with LED technology
•Night time auto dimming feature (illumination)
•High precision step motor technology for precise reading
•Sensor and gauge holder included
•White LED lettering on top of black
•No control box necessary (only needs the gauge & sensor)

For more information call “1-800-997-TINT”

Mishimoto Honda Civic SI radiator hoses are made from a combination of high-grade silicone and heat-resistant embedded fibers for a high-quality replacement kit for your OEM rubber hoses. Available in black, blue or red, Mishimoto silicone hoses retain OEM fitment while providing increased pressure tolerance for the ultimate upgrade in performance and style.

Mishimoto guarantees superior performance and quality with an unmatched lifetime warranty on all parts.

For more information call “1-800-997-TINT”

Blackworks is proud to present our new 3 Point Front Strut Tower Bar and new Rear Strut Tower Bar for the 92-00 Honda Civic & 94-01 Acura Integra. These Strut Bars are made from High Quality T6061 aircraft grade aluminum. Our Brackets are designed using the most state of the art CAD software in the industry to ensure quality. These are individually handcrafted and TIG Welded for strength and each one is passed through our multipoint quality control divisions. Designed to help prevent shock tower flex, expect massive improvements in your high speed cornering.

For more information call “1-800-997-TINT”

Skunk2 is proud to introduce its 70mm Alpha Throttle Body for Honda’s B-series engines (also compatible with D-, F-, and H-series) in its exclusive, fine shot-blasted surface finish. Skunk2’s 70mm Alpha Throttle Body is designed to be used with Skunk2’s Pro Series Intake Manifolds as well as OEM and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price.

Skunk2’s Alpha Throttle Bodies are precision die-cast from high-quality materials and include features previously offered only in our Pro Series line, like countersunk, stainless steel mounting bolts, solid brass throttle plates, fully machined bores, and idle adjustment screws for fine tuning. All Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesn’t just provide more flow but retains smooth drivability and OEM throttle characteristics.

A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2’s Alpha Throttle Bodies for B-series engines feature a large, 70mm bore, which results in significant horsepower gains throughout the powerband on heavily modified, naturally aspirated applications and even more on forced induction ones.

Skunk2’s 70mm Alpha Throttle Body offers Skunk2 performance, industry-leading customer service, and a limited-lifetime warranty policy, all at a price comparable to competitors’ budget-minded throttle bodies. Unlike the budget-minded throttle bodies, though, only Skunk2 Alpha Throttle Bodies ensure precise fitment and the peace of mind of knowing that a Skunk2 representative is just a phone call or email away.

For more information call “1-800-997-TINT”