Moroso‘s new aluminum dry sump pumps have been developed with our decades of oiling system expertise to give you a lighter, better performing oil pump that will save weight and make more crankcase vacuum!

The new oil pumps feature:
•Tri-lobe aluminum scavenge sections featuring individual timing gears to ensure proper clearance at the highest RPM’s
•Spur gear pressure section based off Moroso’s highly successful billet wet sump pump design
•Variable spring rates optimize your oil pressure for smooth, reliable oil pressure readings
•Multiple #16 scavenge outlet options for increased flow back to your dry sump tank and/or fitment requirement on your application
•Pump weighs almost half of gerotor pumps, and takes up to 40% less power to drive!
•Custom pressure section sizes for increased efficiency with different pump speeds
•Door car and dragster brackets available, includes all necessary fittings

These pumps are now available:
•22341 – Dry Sump Pump, T3 Series, Single Stage, Door Car Bracket
•22343 – Dry Sump Pump, T3 Series, 3 Stage, Door Car Bracket
•22344 – Dry Sump Pump, T3 Series, 4 Stage, Door Car Bracket
•22345 – Dry Sump Pump, T3 Series, 5 Stage, Door Car Bracket
•22346 – Dry Sump Pump, T3 Series, 6 Stage, Door Car Bracket
•22441 – Dry Sump Pump, T3 Series, Single Stage, Dragster Bracket
•22443 – Dry Sump Pump, T3 Series, 3 Stage, Dragster Bracket
•22444 – Dry Sump Pump, T3 Series, 4 Stage, Dragster Bracket
•22445 – Dry Sump Pump, T3 Series, 5 Stage, Dragster Bracket
•22446 – Dry Sump Pump, T3 Series, 6 Stage, Dragster Bracket

For more information call “1-800-997-TINT”

Advanced Clutch Technology (ACT) is pleased to introduce our new lightweight, SFI Spec. 1.1 Certified, XACT Streetlite flywheel for the 2000-2003 Honda S2000 2.0L and 2004-2009 Honda S2000 2.2L.

These high quality, forged chrome-moly steel flywheels are CNC-machined and feature induction-hardened integral ring gear for increased durability. ACT flywheels are engineered for strength and are precision-balanced for smooth operation.

Driver and spectator safety are a top priority at ACT. Each XACT flywheel is certified to meet SFI Spec 1.1 standards, making them legal for competition where SFI 1.1 certification is required or recommended. XACT flywheels come complete with an official SFI sticker and serial number, as required for certification.

The new XACT Streetlite flywheel 600355, weighing in at 11 pounds, joins the XACT Prolite flywheel, as a performance replacement flywheel for the S2000. The Streetlite flywheel provides quicker engine response and acceleration, while being significantly lighter than stock.

For more information call “1-800-997-TINT”

Since its humble beginnings over 40 years ago, K&N has been delivering the best in performance filters for just about anything with an engine. K&N became the official sponsor of the NASCAR K&N Pro Series in 2010 and the #1 filter in NASCAR. In recognition of K&N’s partnership with NASCAR, K&N has released the Pro Series Oil Filter. K&N Pro Series oil filters embody the spirit of NASCAR performance racing with its new sleek canister design and filtration media which is all precision engineered for the driver on a budget.

The Pro Series oil filters are high quality mid-grade oil filters, co-labeled with the K&N and NASCAR logos. Complete with a fluted black canister, these oil filters are designed for removal using a traditional oil filter wrench. The newly engineered filter media is designed to exceed OE standards for filtration and flow, allowing for a high volume of clean oil to keep your engine well lubricated and free from harmful oil contaminants.

The Pro Series oil filters come with strong sidewall canisters for higher burst strengths, PSI relief valves and nitrile rubber anti-drainback valves (where applicable), and rolled threads to help prevent stripping when installing the oil filter.

Perhaps the most convenient feature of the Pro Series canister oil filters is how they’re numbered. Simply take the HP- prefix from the K&N Performance Gold oil filter that fits your vehicle and change it to a PS- prefix. For example, a vehicle that takes an HP-3002 can use a PS-3002 Pro Series canister oil filter as well. Those looking for a high quality oil filter product at a budget price will find K&N Pro Series canister oil filters are the perfect fit.

For more information call “1-800-997-TINT”

Mishimoto has just released OEM replacement radiators for your sport compact or truck. The Mishimoto OEM Replacement Radiators feature perfectly created plastic tanks with aluminum cores. These radiators are a direct OEM replacement and require no alterations.

These radiators are now available:
•R1015 – Jeep Wrangler YJ, L4, & L6 OEM Replacement Radiator, 1987-1995
•R2262 – Jeep Grand Cherokee 4.0L OEM Replacement Radiator, 1999-2004
•R2263 – Jeep Grand Cherokee 4.7L OEM Replacement Radiator, 1999-2000
•R2291 – Dodge Ram 5.9L OEM Replacement Radiator, 1998-2001
•R2331 – Subaru Legacy, 2000-2004 & Subaru Baja, 2003-2006 2.5L Non-Turbo OEM Replacement Radiator
•R2336 – Jeep Grand Cherokee 4.7L OEM Replacement Radiator, 2001-2004
•R2354 – Honda Civic 1.7L OEM Replacement Radiator, 2001-2005
•R2789 – Ford Mustang V6 & V8 OEM Replacement Radiator, 2005-2008

For more information call “1-800-997-TINT”

For the ultimate in tunable suspension performace, complete your suspension upgrade with an Eibach ANTI-ROLL-KIT. While our PRO-KIT performance springs are regarded as the primary suspension enhancement components, the Eibach ANTI-ROLL-KIT allows critical fine-tuning of your Mustang’s handling characteristics.

Our ANTI-ROLL-KITS reduce body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation.

Manufactured from cold-formed, tubular high-strength aircraft-grade steel for precision performance, and finished with a long-lasting red powder coat finish, the ANTI-ROLL-KIT comes complete with all necessary mounting hardware and instructions for easy bolt-on installation.

ANTI-ROLL-KIT Part# 6389.320

•Performance Tuned Sway Bars for Improved Handling and Reduced Body-Roll
•Perfectly Balanced for Optimum Neutral-Steering Handling and Precise Turn-In Response
•Precision Engineered and Calibrated for PRO-KIT and SPORTLINE Performance Spring Kits
•Eibach Hi-Tensile Steel Alloy, Cold-Formed, Tempered and Shot-Peened for Long-Lasting Performance and Durability
•Greasable Urethane Bushings For Increased Responsiveness
•Precision Forged Ends and OEM Style Pressed Bushing Locaters (No Welding Or Weak Points Here)
•Million-Mile Warranty

For more information call “1-800-997-TINT”

Torque Solution is proud to present the new Rear Dogbone Control Arm Kit for the 996/997 Porsche 911. This Rear Dogbone kit is designed to correct the rear suspension geometry on your lowered Porsche 996/997. If you are experiencing uneven tire wear due to too much camber this kit will help bring your alignment back in spec for better performance and longer lasting tires. The factory camber adjustment range is not enough to bring your car back within spec after lowering the vehicle. if you plan to track your car or get the full life of your tires these are a must have.

Features:
•Made of 6061-T6 Aluminum w/ FK Rod Ends
•4 links Total Included in Each Package
•Requires NO modification to chassis
•Direct bolt on replacement part
•Lifetime Warranty

For more information call “1-800-997-TINT”

By unveiling of a new sport hybrid coupe for the North American market, Honda blurred the lines between performance and environmental responsibility with the all-new 2011 Honda CR-Z. Complete with a 1.5L i-VTEC engine and Integrated Motor Assist (IMA) hybrid-electric system, this uniquely designed hybrid is geared for the driver looking for a way to both protect the environment and have a little fun on the road.

K&N shares these same ideals by offering washable and reusable high flow air filters and intake systems that cut down on disposable filter waste while adding power and performance. The new 69-1018TS Typhoon Air Intake System does just that for the 2011 Honda CR-Z. The 69-1018TS intake comes complete with a free-flowing mandrel-bent aluminum tube and oversized high flow X-Stream top air filter, all in a ready to install bolt-on system for your CR-Z.

“The 2011 Honda CR-Z is a new vehicle platform and required new development of major kit components,” says K&N Performance Kit Manager Bert Heck. “A new intake tube was developed for the 69-1018TS utilizing a reduced volume area in the mass air sensor location to retain factory drivability while increasing horsepower.” Heck also reported the development of a new heat shield and mounting brackets to protect the air filter from direct-radiated heat and to provide a durable mounting location for the intake tube and air filter assembly. Heck and the K&N intake development team utilized the factory lower fresh air duct and airbox mounting locations. Over 160 dyno runs and many miles of on-road testing went into the development of the 69-1018TS to verify the great performance differences that this intake kit can make. The estimated power gain of the 69-1018TS when installed on a 2011 Honda CR-Z with a 1.5 liter engine is 4.7 horsepower at 5049 rpm.

This single upgrade to the 69-1018TS replaces the factory airbox and is guaranteed to add horsepower and torque to your CR-Z, while providing easier airflow and excellent filtration to protect your engine. The 69-1018TS is equipped with a K&N X-Stream top air filter, part RX-4950, which is designed with K&N’s multi-layered oiled cotton gauze media and will only require servicing up to every 50,000 miles depending on driving conditions. The 69-1018TS is also backed with an industry leading 1,000,000 mile limited lifetime warranty for peace of mind, while you and your CR-Z are protecting the environment from waste and boredom.

For more information call “1-800-997-TINT”

The power packed punch generated from the all-new IS1320 will grab you by the seat of your pants with gains of up to 7.2 h/p and 6.5 ft/lbs of torque. Designed and tuned for the Kia Forte, Injen makes this simple bolt-on a must for that weekend getaway to the race track! As an added value, your engine will benefit from the cleaning efficiency of the first “surface loading” web nano-fiber dry filter: the media that catches contaminants on the surface while accelerating airflow for more POWER!

Key Features:
•MR Technology – tunes intake to factory air/fuel ratios
•Air Fusion – adjusts short/long term fuel trim
•Web Nano-Fiber Dry Filter
•Heavy Duty Silicone Elbow
•Mandrel Bent Aluminum Intake

For more information call “1-800-997-TINT”

aFe is proud to announce the Release of a new Magnum FORCE Stage 2 Air Intake System for the 2010-2011 Dodge RAM 2500/3500 L6-6.7L (td). This system is available with a Pro DRY S filter (P/N: 51-12032), Pro 5R filter (P/N: 54-12032), Pro GUARD 7 filter (P/N: 75-12032), or a Value Pack (75-12032-0V). The Value Pack includes a Pro GUARD 7 Filter, Pro DRY S Filter, Restore Kit and Pre-Filter.

For more information call “1-800-997-TINT”

GTSPEC is proud to present our new S-Wave Rear Adjustable Toe Arms for 08+ Subaru Impreza WRX/STi!

For more information call “1-800-997-TINT”